machines and plants for process engineering used for sale (7,560)

Manufacturer: Krauss Maffei Model: 800-5700 MC Year of Manufacture: 1999 Technical Data - Clamping Force: 8000 kN - Platen Size: 1600 × 1510 mm - Tie Bar Distance: 1120 × 1000 mm - Mold Height: 600 – 1100 mm - Daylight (Platen Opening): 2000 mm - Total operating hours (machine switched on) : currently 02,193.40 - Operating hours in production : currently 82,849.13 - Heating Capacity: 59 kW - Control: MC4 Injection Unit - Screw Diameter: 105 mm - Shot Volume: 3611 cm³ - Injection Pressure: 1580 bar - Dimensions (L×W×H): 10.15 × 2.86 × 2.40 m - Pump Drive Power: 110 kW - Oil Tank Capacity: 2000 L - Machine Weight: approx. 45 tons Features / Extras - 8 temperature control zones + 2 additional zones for plasticizing heating - 4 core pulls with movable platen - Hydraulic rotary bolt shut-off nozzle (HSVS) - Air valve (1x on movable platen, WAP) - T-slots in clamping plates ac ...

Manufacturer: Bavelloni Model: Gemy V 14 The Bavelloni Gemy V 14 is a high-performance vertical glass edging machine built for precision finishing of flat glass. Its 14 spindle configuration provides excellent grinding and polishing, delivering smooth, high-quality glass edges. Find more here - / Contact us at -

Manufacturer: Demag Model: ET80-430-B-2 Year of Manufacture: 2006 Type of Machine : Plastic Injection Moulding Machine Operating Hours: 44,538 Technical Specifications - Clamping Force: 785 kN - Shot Weight in Polystyrene: 208 g/PS - Screw Diameter: 40 mm - Nozzle: Radius 15, spring-loaded shut-off nozzle M 60, Radius 15, Bore 3 mm - Article No. 12026066 Nozzle SVN 15/3 Fuchslocher - Centering Ring: 125 mm - Machine Design: 1-component machine, fully hydraulic - Max. Distance Between Platens: 700 mm - Min. Mold Installation Height: 250 mm - Max. Injection Pressure (Unit 1): 2025 bar - Air Valves: 1 - Platen Size / Tie Bar Clearance: 540 x 540 mm / 400 x 400 mm - Ejector Stroke: 150 mm - Screw Length (Unit): 20 L/D (Diameter 40 mm) Find more here - / Contact us at -

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

condition: used,Other: Manufacturer: Heinkel Type: HF 300 Year of construction: 2000 Filling quantity: 6.5 L Drum diameter: 300 mm Max. speed: 3000 rpm-1 Material of the product. Parts: V4A / 1.4571 Complete control system & extensive documentation available ,Manufacturer: Heinkel,volume: 6

Equipment: Heatable/coolable, Overpressure,Condition: used,Other: Manufacturer: Fryma Type: VME-12/C ,Volume: 22,Max. overpressure: 2.5,Max. permissible Operating temperature : 100,Design: upright,Stand shape: mobile on castors,Heating/cooling (filter bar): available,Volume double jacket: 3.3,Max. permissible Operating overpressure: 4.0,Year of construction: 2000,Technical documents: various documents,Type plate: Yes,Remarks: Due to transport damage, one of the engines broke off (see detailed photos) System could be overhauled and put into operation by a specialist company for homogenization technology at an additional cost

Stock number: R660, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator placement: For edge mounting, Propeller size: Excl. propeller, Motor: 1,5 kW - 220/380 Volt - 1400 rpm. , Manufacturer: Veenstra Roerwerken

Process chiller / chiller air-cooled, Type: TAEevo TECH MINI M05 MTA S.p.A. TAEevo TECH MINI M05 are small compact water cooling units designed for indoor installation are suitable. Including buffer tank (open system, no pressure tank) and built-in circulation pump. Cooling capacity kW 1.73 Cold water temp. Exit/inlet: 7 / 12°C, Volume flow m³/h 0.286 Available pump pressure bar 3,342 Ambient temperature °C 32, Refrigerant R 410A Electrical data: Voltage V 230, frequency Hz 50, phases Ph 1, Max. power consumption (kW) 1.6 Max. current (A) 7.5 Starting Current Circuit (A) 20 Protection class: IP33 Dimensions: Length mm 660, Width mm 486, Height mm 623, Weight kg 71 Connection Rp 1/2" Serial No.: 2200422920 Year of construction 2025 Condition: Optical 2, Technically ok used Used machines can have visual defects due to their use. (Technical chang ...

A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.

A Wolf exhaust unit for wet rooms is available. Air volume flow: 1000m³/h, pressure loss (external): 200Pa, motor power: 0.25kW, motor speed: 1500rpm. Documentation available. An on-site inspection is possible.

Three filtration systems LTA AC 3002-R are available. Power: 1380VA, output voltage: 11kV, frequency: 50/60Hz, power connection: 2.6A, weight: 2x 130kg, 1x 135kg. An on-site inspection is possible, the systems have already been dismantled.

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 2 ...

Used microfiltration made by Intermasz type MF 1137231178 UNT. New 2013. Milk and whey microfiltration installation. Capacity: 10,000 l/h. Filtration area: 13 m³. Weight: 950 kg.

2 identical NH3 Bitzer cooling machine systems Standing on sturdy frames supervised by Anderten Kälte-und Klima GmbH Type:OSKA 8571-K Year of construction 2006

MODITEC shredder type BIGGER 10 Year: 08-2004 Voltage: 400V Power: 5.5 KW Weight: 1800 kg

Used twin-screw mixer made by Müllner & LUX KG, type LM 40. New 1990. Two motors 7,5 kW.

CARRIER Absorption Chiller Super Absorption Grey Manufacturer: Carrier Type: Absorption Cooler Super Absorption Condition: used, complete, no external damage

Manufacturer: York Model: Millennium Type: YK EA EA H4C SCP E Year of Make: 2003 Power: 407 kW Refrigerant: R134a (HFC) Nominal Pressure Evaporator (Cooler) DW Pressure: 12.5 bar Nominal Pressure Condenser DW Pressure: 16.2 bar Condition: used, in working order

Manufacturer: York Model: Millennium Type: YK AB AB P45C 1F Year of Make: 2002 Refrigerant: R134a (HFC) Refrigerant charge: 570 kg Nominal Pressure (Design Pressure): Evaporator (Cooler) DW Pressure: 12.5 bar Condenser DW Pressure: 16.2 bar Condition: used, in working order

348 litre, Stock number: T3937, Litre: 348 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pcs., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Double jacket: No, Insulated: No, Tank cover: In the top Ø 255 mm., Agitator: No, CIP: Yes, Working temperature: -15/100° C, Working pressure tank: 0,5/-1 bar, Inner diameter: Ø 630 mm., Total height: 1250 mm., Manufacturer: G.A. Rustfri, Year: 2009

348 litre, Stock number: T3938, Litre: 348 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Double jacket: No, Insulated: No, Tank cover: In the top Ø 255 mm., Agitator: No, CIP: Yes, Working temperature: -15/100° C, Working pressure tank: 0,5/-1 bar, Inner diameter: Ø 630 mm., Total height: 1250 mm., Other: Severed handle, Manufacturer: G.A. Rustfri, Year: 2009

1.500 litre, Stock number: T3808, Litre: 1.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with lid and strengthening ring, Bottom: Conical, Turbolence plate: 1 pc., Agitator: Yes, Agitator type: 3-bladed propeller, Motor: 1,1 kW - 230/400 Volt - 925 rpm., CIP: Yes , Inner diameter: Ø 1350 mm., Total height: 1870 mm.

Pull-wire emergency switch, emergency stop switch, pull-wire emergency switch -Manufacturer: Kiepe, pull-rope emergency switch -Type: SEB 00? see photos -Dimensions: 240/130/H150 mm -Weight: 5.3 kg

Used drum screen made by Bühler, 1 drum. Very good condition.

925 litre, Stock number: T4009, Litre: 925, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 245 mm., CIP: Yes, Working temperature: 2-130° C, Working pressure tank: -1 - 5 bar, Working pressure double jacket: 0-3 bar, Inner diameter: Ø 900 mm., Outer diameter: D 1000 mm., Total height: 1750 mm., Other: Prepared for magnet agitator, Manufacturer: Dan Process/KOFA, Year: 1994