machines and plants for process engineering used for sale (7,660)

We offer a refurbished rotary lobe blower Brand: Robuschi Type: K 150 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Used evaporating machine for milk and caramel masses made by Spomasz Pleszew, type: DUO CAA-9

Board machine Type: Tronic 140/90-22 Manufacturer: OMAG Year: 1996 The board machine built in 1996, has been operated continuously since it was commissioned in 1997. For sale is not only the block machine itself but also the entire production line, allowing full use of the system after purchase. Several components of the mixing plant (e.g. core and face mix mixers), the bucket conveyor, wet side, transfer platform, dry side, and package buffer were renewed in 2009. The block machine remained in operation until the end of 2024 and can be inspected in fully functional condition. MACHINE DATA Block forming machine Board machine manufactured by OMAG, type TRONIC 140/90-22, year of manufacture 1996 Production of core and face mix Control system: Simatic S5 with visualization by Frima Board size: 1,400 × 1,000 mm Cross cleaning Quick mould clamping, pneumatic Sheet pulling dev ...

2 pcs 18.5 kW Grundfos centrifugal pumps: MGE160LB2-FF300-F3 + NBE65-160/177 AF2ABQQE ENGINE: Type: MGE160LB2-FF300-F3 P.N.: 85901266-V03 Power: 18.5 kW PUMP: NBE65-160/177 AF2ABQQE Model: B97979196P219120001 Flow rate: 118.2 m³/h Lifting height: 36.2 m Pumps are functional, but operating hours are unknown. Attention! Sold in "as is" and under exclusion of any warranty

Offer a stator winding machine Schümann. Winding speed: 50 / 63 / 100 / 125 turns/min Voltage 380V

KOMPLETE RUF ANLAGE BRIKETPRESSE RUF600 600KG/H YEAR OF MANUFACTURE 2009

The machine originates from a prominent pharmaceutical production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. 2x available units Technical Information: Fitted to steel frame construction Stroke length: max. 15 mm Stroke frequency: 140 per min Motor: 1.1 kW; 220/380V Flow Rate min.:10 l/h Flow Rate max.: 104 l/h Operating Temperature: from -80 °C to 200°C Viscosity: from 0,1 to 250,000 mPas Piston Diameter: 28mm Machine Size: L: 1300mm x W: 700mm x H: 1800mm Weight: 50kg

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

Manufacturer: Hermann Schwammberger Model: DLMEh 450 / 50 / 3250 Year of Manufacture : 2017 Type of Machine : Hardening furnace strip line Heating Power: 96 kW Total Current: 136 A Rated Temperature: 1,120 °C Certification: CE Find more here - / Contact us at -

Supply air unit with heat exchanger Fabr. Huber + Ranner Type Fe-Vz/9, air flow rate 10,000 m³/h Motor power 0.8 KW ex, Fan speed 2,650 rpm

Supply / exhaust air unit Fabr. Huber + Ranner Type Va-m-V2/8, Fabr. No. A92707/2 ZuP.1 Air flow rate 7,500 m³/min., engine 4 Kn = 1,500 rpm. Fan speed 2,600 rpm combined with: Va-m-V2/8; No. A92 707/2 P1-A1 Motor 3 KW; n = 1,500 rpm Fan speed 2,650 rpm Air capacity 7,500 m³/h

Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.

Used microfiltration system made by Membra Flow with ceramic membranes, program Simatic, capacity 12.000 liters / h. After general renovation and service it was taken out of production (not working again).

Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible.

For Sale: Mahler Continuous Furnace with Güntner Cooler Mahler Continuous Furnace - Manufacturer: MAHLER - Type: DLE 800/220/3000 G - Heat Power: 172 kW - Nominal Temperature: 1120 °C - Year of Construction: 2014 - Certification: CE Güntner Cooler - Manufacturer: Güntner - Model: GFDC WD 080.1/14-42-3980105M - Year of Manufacture: 2021 - Volume: 133.6 liters - Max. Permissible Pressure: 10 / 0 bar - Permissible Temperature Range: -50 °C to +100 °C - Ambient Temperature Range: -30 °C to +50 °C - Fan: VT03061U.1 / 2448 / 630 min⁻¹ / 2.1 A - Test Pressure: 11 bar (Compressed air) - Test Date: 2021-03-15 - Fluid Group / State: 2 / Liquid Find more here - / Contact us at -

Find more here - / Contact us at -

8.200 litre, Stock number: T4011, Litre: 8.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 3 pcs., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm., Turbolence plate: 3 pcs., Agitator: Yes, Agitator type: 2 pcs. 3-bladed propeller, D 550 mm., Agitator placement: From the top, Motor: 0,37 kW - 400 Volt - 119 rpm., Working temperature: -10/143° C, Working pressure double jacket: 6 bar, Inner diameter: Ø 1900 mm., Outer diameter: D 2050 mm., Total height: 5330 mm., Manufacturer: Vamdrup Rustfrit Stål, Year: 2001, Other: 2 pcs. tank plates

Stock number: PM2079, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SMH60 D8

Stock number: PM2078, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: MH60 D8/B

video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -

Machine name: Decanter centrifuge used Manufacturer: Alfa Laval Type: DSNX 4545 Year of Make: 2000 Max. drum speed: 3,250 rpm Operating hours: 16,700 hours Material: Stainless Steel Drive motor: 37 kW Inner diameter drum: 450/258mm Ab. Sediment density: 1.2 kg/dm3 Max. operating temperature: 100 C° Dimensions: L 3,700 x W 1,100 x H 1,300 mm Curb weight: approx. 2,800 kg Tech. Documentation: Yes Accessories: Frequency converter, solids slide, incl. chute, liquid drain funnel and reversed eddy current brake Condition: Used Price: On request

An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.

Battery Production Facility Manufacturer: Aumann Year: 2016 Condition: Used – good working condition 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14  ...