machines and plants for process engineering used for sale (7,624)

Mixing tanks Manufacturer: Becomix Type M 15 Technical specifications Mixing tank, very good mint condition (was only used for the test run) Total boiler capacity 26 l Net capacity 15 l Mobile table version Product Area Material 1.4404 Boiler room material 1.4541 Usable space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Can be heated with steam or water Coolable with water Turbo dissolver agitator power 0.75 kW, nominal speed 1,390 rpm, mechanical seal Operating manual available

Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display, Additional title: Reverse osmosis for desalination of raw water, Flow rate: 6000 l/h depending on the blending quantity, Max. operating overpressure: 14 bar, Recovery appr.: 82 %, Water: 5 - 7 m³/h; 1 - 10 bar, Operation / ...

Cylindroconical stainless steel tank, most recently used for settling diatomaceous earth. Fitted with drainage connections in the cylindrical section and aeration connections in the conical section., Additional title: KG settling tank, Content: 4450 l, Max. working pressure: 80 °C, Length: 1710 mm, Width: 1710 mm, Height: 3550 mm, Weight: 450 kg, Material: stainless steel 1.4301, Position: vertical cylindro-conical tank, Base construction: on pipe feet, Features: manhole on top, 4 shell-de-watering-connections, 4 aeration-connections at the cone

Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you., Material: Pump housing and impeller in stainless steel, Position: free standing/mounted on base, Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter

Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia, Additional title: Refrigerant: Ammonia, Cooling capacity: 70 kW, Design to: -8 °C, Design tc: 27 °C, Power: 15 kW, Operation / Control: Control cabinet with hardware control, Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

Water degassing module. Suitable for integration into existing control systems., Additional title: cold degassing, Capacity: 5000 l/h, Residual oxygen content: 0,03 mg/l, Column volume approx.: 300 l, Operating temperature: 95 °C, Operation / Control: PLC / visualization by customer, Material: Stainless steel 1.4301 (AISI 304), Base construction: Height-adjustable feet, Features: Two-chamber column; water pump;

Manufacturer: ARBURG Model: ALLROUNDER 370 C 800-250 Type of machine: Injection molding machine Year of manufacture: January 2005 Weight: 3180 kg Clamping force: 800 kN Operating voltage: 400V, 3-phase, 50Hz Heating: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW with Multilift handling for inserts Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Arburg Year of manufacture: 2008 Model: ALLROUNDER 370 S 600-290 Type of machine: Wax spraying machine Condition: already dismantled, ready for collection Find more here - .ucymachines/ Contact us at - sales@ucymachines

Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible.

An oil-injected stationary compressor CompAir is available. Stages: 2, Air flow rate: 17m³/min, Max. operating pressure: 12bar, Machine dimensions X/Y/Z: approx. 3300mm/1800mm/2000mm, Weight: approx. 3900kg. Documentation available. An on-site inspection is possible.

Stock number: A226, Volumen: 2,813/2,910 litre, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 2,52 m², Working temperature: -10/+150° C, Working pressure: Max 16 bar, Dimensions: L 180 x W 180 x H 630 mm., Connections: 4 pcs. Ø 1½, Manufacturer: Danfoss, Type: XGM032H-1-60, Year: 2017, Other: Specially developed for district heating and district cooling systems

Stock number: PC9240, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 0,75 kW - 220/380 Volt - 2900 rpm., Theoretical capacity: 5350 l/h., Stage: 1, Working pressure : Max 3,4 bar, Working temperature: Max 90° C, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Pedrollo, Type: CP 158 - ST6

Engel ES 2550/500 HL - V Hours - 114924 Injection unit Screw diameter mm 70 Screw peripheral speed m/s 0.894 Maximum shot volume cm3/g 1193 Injection pressure maximum hydr/spec bar 2140 Nozzle radius mm R35 Maximum barrel temperature °C 350 Clamping unit Clamping force kN 5000 Maximum opening stroke (distance between the platens) mm 1700 Minimum installation height mm 500 Distance between tie bars Horizontal mm not applicable Distance between tie bars Vertical mm not applicable Centering ring Diameter nozzle side mm 200 Centering ring Diameter ejector side mm 200 Ejector Ejector available Yes/No Yes Ejector stroke Maximum mm 250 Core pulls Core pulls AS pcs. 2 Core pulls DS pcs. 1 Air valves Pneum. Valve gate nozzles - 4 Cumsa - No Air valves - 1 Robot-Linear Engel A-axis - No B-axis - Yes C-axis - Yes 5- /6-axis Yes/No No Machine data Year of manufactur ...

Dissolver Niemann KDV 491-50 Power 37 kW Speed range 300-1400 1/min Niemann Speedcontrol All functions via control panel new jaws electric container collet Control cabinet

Dissolver Niemann KDV 241-25 Power 18 kW Speed range 290-1650 1/min Niemann Speedcontrol All functions via control panel new jaws electric container collet Control cabinet

Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical a ...

Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: Siemens, Sirius Contactor Auxiliary Switch Block Power Contactor -Type: 3RT1045-1AL24 3ZX1012-0RT04-1AA1 -Number: 1x contactor available -Cardboard dimensions: 210/150/H80 mm -Weight: 1.9 kg

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

Used decanter centrifuge from GEA Westfalia type UCD 305-00-32. Year of manufacture 2020. Control included. Centrifuge after technical inspection, ready for operation.

A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible.

General SKU045R150 MakeAVA-Hueb GmbH TypePerlrussm. HRM 600 No.5257 Year of construction1997 Mounted on framecheck Pressure Working pressure0.1 Bar Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor55 KW Specified Features - Paddle mixer Continuous mixercheck Trough sizesø 600 x 3000 mm Inlet630 x 450 mm Outlet500 x 340 mm With jacket2 x 95 l. Max. temperature100 °C Motor55 kW, 400/690 V MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld Floor space5,2 x 1,0 m Total height1,3 m Weight4200 kg Technical specs Extra informationapproximately 0,1 bar working pressurePaddle mixersPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoAnimal feedOther feedS ...

General SKU253M221 LocationBarneveld MakeBauermeister &: Co. Norderstedt TypeUT-63 Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 1200x400mm Grinding room sizeDia. 1200x400mm With sieve cage(Pore size ø 220 µm) With grinding trackcheck Housing dimensions 2000x0,55x1800 mm InletDia. 400 mm Motor185,0 KW, 415 Volt Fine Impact Mills MaterialMild steel, Stainless steel 1.4462 (Duplex2205) General No.940785 Year of construction1989 Mounted on framecheck Floor space3,9x1,5 m Total height3,0 m Weight8500 kg Extra Specifications-- RECONDITIONED --Consumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchReconditionedAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsDetergent & surf.CosmeticsE-waste & metalFood additivesSugarFine Impact MillsAnimal  ...

General SKUR0830 LocationBarneveld MakeJaeggi Bern (CH) Type35 m² Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface35 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface35 m² Tube capacity164 l. U-typecheck Number of tubes:120 Tube diameter16 mm Tube length6000 mm Wall thickness tubes1 mm Max. temperature200°C Shell capacity206 l Shell diameter406 mm Shell length3000 mm Wall thickness shell4 mm Max. temperature200°C Shell connectionsdia. 65 mm (2x) dia 15 mm (1x) Cover connectionsdia. 100 mm (2x) MaterialStainless steel 1.4435 (316L) General No.1894 Year of construction1990 Floorspace3.7 x 0.7 m Total height1.3 m Weight750 kgShell and tube heat exchangersOils & fatConsumer wastePaints & coatings ...

General SKU361T1082 MakeFerrum TypeDSZ-OR/T 1000/500 No.414-092 396 Year of construction2001 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Rubber linedhallar chamber Perforated basketcheck Capacity200 Ltr. Basket sizesDia 1000x500 mm Max. loading weight250 kg Hydraulic operatedcheck Liquid outletDia. 100 mm With hydraulic unitWandfluh HN10-6nvh, motor: 0,75 kW, 230/400 volt, 1380 rpm Motor11kW, 400/690 volt, 1475 rpm Max. basket speed1200 rpm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) General Mounted on foundation platecheck Floorspace1,8x2,2 m Total height1,7 m Weight2400 kg CEcheck ATEX designedcheck Extra SpecificationsRevised machine!Including: new motor, pulleys, belts, shaft seal, and bearings.Filter area 1.57 m².Centrifugal acce ...

General SKU042Y538 MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Mounted on framecheck Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Main Features Capacity1.35 Ltr./Hr. Specified Features - Distillation Distillation installationPure Steam Generator Vessel sizesø 320 x 1800: ø 280 x 1300 mm Number of columns:2 Electric heatedcheck MaterialStainless steel 1.4401 (316) General LocationBarneveld With switchgear(as is) Floorspace1,5 x 0,7 m Total height2,7 m Weight600 kg Extra SpecificationsStilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems.Pure steam production: adjustable (operating range stated) up to 8 bar.Steam consumption (heating steam to pure steam): 1.35 kg/kg of pure steam.DistillationOils & fatFine chemic ...

General SKUR0891 MakeLe Carbone-Lorraine AG (FRA) LocationBarneveld TypePolyblock NF610G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16.3 m² Tube capacity80 l. Max. temperature165°C Shell capacity93,8 l. Shell diameter662mm Shell length1370mm Max. temperature165°C Shell connections2x DN150 Cover connections2x DN200 MaterialGraphite Graphilor XBS General No.17474 Year of construction1996 Floorspace0,9x0,9 m Total height1,8 m Weight1500 kgShell and tube heat exchangersOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCat ...

Used disc centrifuge from WSK Kraków type MAPX 309. Centrifuge under renovation. The centrifuge worked on cooking oils. Capacity 10,000 l/h.