machines and plants for process engineering used for sale (7,624)

Manufacturer: WILD INDAG, now part of the SPX Flow Group Type: INO1 CC 160 VT TS100 Year of Make: 2010 Working Principle: Rotary Lobe Pump Max. pressure: 16 bar Drive: SEW-Eurodrive 5.5 kW geared motor Most recently used in butter production Version for food applications Condition: very good

Drying cabinet vacuum tray dryer, tray dryer, Zschocke 630 liters I offer a vacuum drying oven from a liquidation. The drying oven is made entirely of stainless steel (food-safe) on the inside and allows drying under vacuum up to 1 mbar (depending on the drying material and connected pump). External heating is provided by a thermal fluid (water, oil). The heating circuit is absolutely tight, various attachments and flanges are available. The dryer was used to dry wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Technical data: Boiler room capacity 630 litres, boiler room dimensions 780x1050x890mm³, number of heating plates 8, plate dimensions 730x1000mm², usable height between plates 85mm, 1 door with gasket Manufacturer Conrad Tschokke A ...

A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration drives: 4, Regeneration drive power: 1.1kW, Rotary valve: ZS 7.5, Motor power: 0.55kW. An on-site inspection is possible.

A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Manufacturer: Durst Type: D-SLK 12 Diagonal, AIRSEC Vario 1/2 Year of manufacture: 2008 Heating medium: liquid gas propane, gas blower burner for natural gas E Dimensions - Spray cabin interior: 4000 x 2400 x 2550 mm - Container exterior overall: 6000 x 2500 x 2800 mm - Aggregate room interior: 2400 x 1850 x 2300 mm Air Performance - Fresh air supply: up to 10000 cubic meters per hour, motor rating 2.2 kW - Exhaust air: up to 10000 cubic meters per hour, motor rating 2.2 kW - Air change rate: up to 408 times per hour - Exhaust discharge velocity: approximately 14.1 to 17 m per second Heating - Maximum heating output: 90 kW - Maximum circulating air temperature for drying: up to 75 to 80 degrees C - Average annual natural gas consumption: approximately 3.4 Nm3 per hour - Maximum consumption at 90 kW: approximately 9.5 Nm3 per hour Filtration - Pre-filter: bag filter, filter cla ...

General SKULY006 MakeCOMI CONDOR S.p.A. TypeHX/L 1250/800 (Horizontal Axis Peeler Centrifuge) Main Features MaterialStainless steel Motor90 KW Inlet diameter80 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity426 l. Basket sizesø 1250 x 800 mm Max. loading weight596 kg Hydraulic drivecheck With hydraulic unit3kW Motor90 kW 3x400 V With variable speed drivecheck Max. basket speed1300 rpm With feeding screwcheck Motor4 kW 3x400 V With scraper(peeling/scraper knife, tungsten carbide removable blade) Hydraulic operatedcheck With hydraulic unitcheck InletDN80 Solids outletDN250 Liquid outletDN150 MaterialStainless steel 1.4462 (Duplex2205) General Year of construction2023 Mounted on framecheck Mounted on foundation platecheck With switchcheck With switchgear(as is) Weight20 000 kgPeeling centrifugesGeneric medicinesBiotechnologyCatal ...

General SKU018W114 LocationBarneveld MakeApex Engineering UK TypeGranupex GR 311-565 No.A-46560 Material Jacket materialStainless steel 1.4306 (304L) Pressure Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Type of tumble dryerv- type Volume565 Ltr. Motor11 KW Specified Features - Tumbler dryer Tumbler dryer/granulator Capacity450-565 l. , Bulk density max. 1,2 G/CC Diameter± 800 mm Cylindrical length± 1200 mm Inletdia. 460 mm Outletdia. 200 mm With jacketcheck With braking motor11,0 kW, 400/690 Volt Dryer speed5,5-17,5 Rpm With lump breaker:Liquid Dispersion Bar:, Max. 2000 Rpm Motor11,0 kW, 380-415 Volt With vacuum pumpmake PIAB type MLL-400 With condensermake APEX, type 61A MaterialStainless steel 1.4401 (316) With jacketcheck General Year of construction1998 With switchgear(Dim. 100x400x150 CM) (as is) Fl ...

General SKUR0894 MakeLe Carbone AG LocationBarneveld TypePolybloc NF 610 G Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16,3 m² Tube capacity93,9 l. Max. temperature165°C Shell capacity80 l. Shell diameter660 mm Shell length1370 mm Max. temperature165°C Shell connections2x DN150 Cover connections2x DN200 MaterialGraphite Graphilor XBS General No.17496 Year of construction1997 Floorspace0,9x0,9 m Total height1,7 m Weight1250 kgShell and tube heat exchangersOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fil ...

General SKUR0875 MakeApaco AG (CH) LocationBarneveld TypeAW300-2600/20-98 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger Heat exchanger:condenser: Verticalcheck Heating surface16 m² Tube capacity105 l. Number of tubes:98 Tube diameter16( inner dia.) Tube length2700mm Max. temperature165°C Shell capacity140 l. Shell diameter323,9 mm Shell length3200 mm Wall thickness shell3,2 mm Max. temperature5°C Shell connectionsDN200 (1x), DN80 (1), DN50 (2x) Cover connectionsDN 50 MaterialStainless steel 1.4435 (316L) General No.503532/3 Year of construction1985 Floorspace0,6 x 0,6 m Total height3,4 m Weight500 kgShell and tube heat exchangersOils & fatC ...

General SKUR0880 MakeApaco AG (CH) TypeAW300-2000/20-98 LocationBarneveld Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface12 m2 Specified Features - Shell and tube heat exchanger Heat exchanger:condenser: Verticalcheck Heating surface12 m² Tube capacity95 l. Number of tubes:98 Tube diameter16 mm ( inner dia.) Tube length2200 Max. temperature165°C Shell capacity110 l. Shell diameter323,9mm Shell length2700mm Wall thickness shell3,2mm Max. temperature5°C Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 (1x) MaterialStainless steel 1.4435 (316L) General No.503531/1 Year of construction1985 Floorspace0,7x0,7 m Total height2,8 m Weight500 kgShell and tube heat exchangersOils & fatConsumer wastePaints & ...

General SKUR0885 MakeApaco AG (CH) TypeAW300-2600/20-98 No.503532/2 Year of construction1985 LocationBarneveld Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger Heat exchanger:condenser: Verticalcheck Heating surface16 m² Tube capacity105 l. Number of tubes:98 Tube diameter16 mm ( inner dia.) Tube length2700mm Max. temperature165°C Shell capacity140 l. Shell diameter324mm Shell length3200mm Max. temperature5°C Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 MaterialStainless steel 1.4435 (316L) General Floorspace0,7x0,6 m Total height3,3 m Weight500 kgShell and tube heat exchangersOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric  ...

8.000 litre, Stock number: T4015, Litre: 8.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top and In the side, Ø 450 mm., Inner diameter: Ø 1500 mm., Total height: H 5300 mm.

750 litre, Stock number: T4038, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Melt tank, Standing: 3 pcs. legs , Top: With hinged lid, Bottom: Conical, Double jacket: Yes, Insulated: Yes , Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: 3-bladed propeller, Agitator placement: From the top, Motor: 0,75 kW - 220/380 Volt - 104 rpm., Working temperature: 98° C, Working pressure double jacket: Steam 4 bar, Inner diameter: Ø 1300 mm, Outer diameter: D 1510 mm, Total height: H 1800 mm, Manufacturer: Flow Tech, Model/type: Melts, Year: 2014, Other: Melt grid in top for ice blocks

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Stock number: D1245, In stock: Yes, Amount in stock: 1 pc., Item: Non-driven roller conveyor - Flexi conveyor, Standing: On wheels , Castors: Breakable in direction of travel and rotation, Rollers: Ø 48 mm wheel axles - 8 wheels per axle, Dimensions: L 1150/4000 x W 400 x H 695/995 mm, Manufacturer: SOCO SYSTEM A/S, Type: Flexi conveyor

Used 2-stage evaporator made by UNIPEKTIN. New 1997. 1-stage aroma trap, 2-stage concentration. For apple juice (cloudy / filtered): Input quantity: 4212 kg / h / 2840 kg / h Input dry pulp: 12 / 17.8% Temp. entrance: 15/45 degrees C. Water evaporation: 3500 kg / h Output quantity: 2,840 / 712 kg / h Temp. output: 50/55/25 degrees C. Initial dry mass: 17.8 / 71% Aroma (15x): 26.8 l / h Temp. aroma: 7 degrees C. Steam consumption: 1450 kg / h Fresh water consumption: 5 m3 / hour

Offered is a Ruma cleaning centrifuge system with cooling unit and pump system for cleaning cooling lubricants, grinding oils, emulsions, wash water and process fluids. Max. achievable cleanliness level: approx. 1µm, suitable media: oils, emulsions, cooling lubricants, wash water, process fluids, max. rotor speed: 3620rpm, rotor diameter: 310mm, max. solids capacity: 12kg, main motor power: 2.2kW, filter aids: not required, separation principle: solid-liquid separation by centrifugal force. Machine weight: 400kg. Documentation available. Inspection possible by arrangement.

Two Artinox inclined clarifier/lamella clarifier systems made of stainless steel are offered for the continuous mechanical separation of dirt particles, sludge, or sediments from water or process liquids. 1) Artinox inclined clarifier/lamella clarifier, pipe connection: Ø 108mm, additional connection: Ø 168mm, main module dimensions: approx. 2400mm/1350mm/2360mm, hopper width bottom/top/center: approx. 1323mm/1896mm/1546mm, inclination: approx. 1.1°, function: solid-liquid separation by sedimentation, application: process water, wastewater, wash water, liquids containing settleable solids, separation principle: sedimentation with lamella packs/inclined plates, flow direction: horizontal, lamella packs: available, sedimentation hopper: available, equipped with multiple basin modules, lamella clarifier sections, sludge hopper, upper pipe distributor, connection nozzles and flanges, lift ...

General SKU289Y465 MakeHermann Linden Serial2034 TypeK II 450 No.4438/4439/2002 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume450 Ltr. Motor45 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity450 l. (850 l.) Trough sizes1000 x 960 x 900 mm With covercheck With jacketcheck Double geared4,5 — 451 rpm/min Motor45 kW 400/690 V Hydraulic tiltingcheck Motor11 kW 400/690 V MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) With jacketcheck General Year of construction2002 LocationBarneveld With switchgear( as is) Floorspace3,45 × 2,18 m Total height2,5 m Weight9.000 kgPaints & coatingsOintmentsStarchRubberAgrochemicalsPlastic & polymersZ-blade mixersLubricants & oleoAnimal feedConfectioneryNew arrivalsHermann LindenIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > OintmentsIndus ...

General SKU098N558 MakeLödige TypeFKM-8000D No.4546 (vessel no. 404) Year of construction1968 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume8000 Ltr. Motor33 KW Specified Features - Powder turbo mixer Paddle dryer(1x) Capacity8000 l Trough sizesdia. 1580 x 4000 mm Inletdia. 500mm + dia. 400mm + dia. 200mm Outletdia. 150 mm With jacket(550 l) Max. temperature215°C Motor33 kW, 500 Volt Speed mixing shaft± 23 rpm With jacketcheck Powder turbo mixers MaterialStainless steel 1.4541 (321) General Floorspace6,8 x 1,9 m Total height2,6 m Extra SpecificationsTop connections dia. 500 mm + dia. 400 mm + dia. 200 mmPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPowder turbo mixersCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmetic ...

General SKU014G031 LocationBarneveld MakeMachinefabriek Vrieco Zelhem B.V. TypeS 70 RB-S Pressure Working pressure0.2 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume7000 Ltr. Motor20 KW Specified Features - Conical mixer Conical mixercheck Capacity8700 Ltr (7000 ltr nett) Largest cone diameter2950 mm Cone height4300 mm Dished topcheck Manhole500 mm With stainless steel armcheck Top drivecheck Motor13,0/20,0 kW (380 V) Motor1,1/1,8 kW (380 V) Bottom bearing pintle bearingcheck With jacketcheck Max. temperature120°C Bottom dischargecheck Outlet with sliding valvecheck MaterialStainless steel 1.4541 (321) With jacketcheck General Mach.No.52624 Year of construction1978 Floorspace3,0 x 3,0 m Total height4,3 m Weight±6000 kg Extra Specifications-- RECONDITIONED --Powdered foodsFine chemicalsStarchReconditionedOther chemical ...

General SKU084Y579 MakeDrais Mannheim TypeHT-1000 No.50766 Year of construction1982 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Motor127 KW Specified Features - Powder turbo mixer Powder turbo mixer(1x) T-armscheck Capacity1000 l Trough sizesdia. 1060 x 1180 mm Top connectionsdia. 340 mm + dia. 260 mm + dia. 135 mm Inspection hatch710 x 500 mm Outlet500 x 300 mm Glands air purgedcheck Motor90,0 kW (380/600 V, 1450 rpm) Speed mixing shaft80/30 rpm With lump breakertype EMS-180 (2x) Motor18,5 kW, (380/660 V, 1450 rpm) Speed lumpbreaker1450 rpm MaterialStainless steel 1.4541 (321) General With switchgear(as is) Sizes switchgear0,4 x 1 x 2 m (WxLxH) Floorspace4 x 1,5 m Total height1,5 m Weight4550 kgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesPowder turbo mixersCatalysts & fillersFeed additivesDiscoun ...

General SKU445W1538 MakeMüller AG LocationBarneveld CEcheck TypeSM 252 Main Features Motor3 KW Inlet diameter100 mm Width250 mm Specified Features - Granulator Granulatorcheck Rotor width250 mm Rotor diameter150 mm Number of rotor knives20 Knives staggeredcheck Number of stator knives:2 With hoppercheck Inletø 100 mm Hinged topcheck Motor3,0 kW, 230/400 volt, 1425 rpm Rotor speed100 rpm Capacity50 kg/h Materialstainless steel 1.4721(heat resistant) With jacketcheck General No.25213002 Year of construction2013 Mounted on framecheck With switchcheck Floorspace1,20 x 0,60 m Total height1,40 m Weight350 kg Extra SpecificationsRotor speed 100 rpm, 20x rotor blades, 2x stator blades, With Colortronic metal seperator, type SF 100Powdered foodsStarchRubberSpicesPlastic & polymersCatalysts & fillersE-waste & metalSugarPlastic & rubberMinerals & inorganicGranula ...

Powder cyclone separator, VA

GEA Westfalia CA 755-01-32 decanters, manufactured in 2007, for winemaking Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU268N308 MakeBusch TypeLotos L2 040 Mach.No.S 100 49629 Year of construction1987/1994 Main Features MaterialMild steel/Stainless steel Motor2.2 KW Specified Features - Vacuum pump PumpVacuum Number of pumps:1 With motor2,2 kW (380 V) InletDN32 MaterialMild steel, Stainless steel 1.4306 (304L) General Mounted on framecheck LocationBarneveld Floorspace1,2 x 1,0 m Total height1,3 m Weight300 kg CEcheck Extra SpecificationsPlus extra Sihi waterring pump, type: LOHY 05501, 0,65kW, 400V, 1400rpm (EX)Vacuum pumpsOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAni ...

General SKU425W1345 LocationBarneveld CEcheck MakePosimat Main Features MaterialStainless steel Motor14 KW Specified Features - Miscellaneous Capacity166 bottles/min Motor14 kW, 400 volt Capacity0,70-3 l. MaterialStainless steel General TypePosiflex-35-VA-Giramat-E Mach.No.11627.3.01 Year of construction2010 Floor space4,10x4,00 m Total height2,55 m Weight6000 kg Extra Specifications20-fold bottle unscrambler.Siemens toucscreen control, type Simatic panel,With vacuum conveyor.size conveyor 4000x1300mm.Sodeca fan, left side outputpossible bottle sizes 0,70-3 l.,&:nbsp:Sorting mono, pressure 6 bar,&:nbsp:MiscellaneousDairyOther feedPosimatMiscellaneous > MiscellaneousIndustries > Food & Feed > DairyIndustries > Food & Feed > Other feedBrand > Posimat What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

General SKU293T678 Makeunknown: missing type plate Mounted on framecheck Main Features MaterialStainless steel Volume315 Ltr. Motor11 KW Specified Features - Z-blade mixer Z-blade mixercheck Capacity315 Ltr. Trough sizes860x840x740 mm With covercheck With jacketcheck Single gearedcheck Motor11 kW 380 Volt Mechanical tiltingcheck Motor750 W 346 V/2 A 220/380 Volt Screw dischargecheck Motor11 kW 380 Volt MaterialStainless steel With jacketcheck General LocationBarneveld With switch(as is) Floorspace2,5x1,6 m Total height2 m Weight3000 kgOils & fatPaints & coatingsPowdered foodsStarchOther chemicalRubberPlastic & polymersCatalysts & fillersFeed additivesPaper & otherZ-blade mixersDetergent & surf.Other pharmaceuticsCosmeticsSugarLubricants & oleoAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicAMK AachenIndustries > Food & Feed > Oils &  ...

General SKU354T965 MakeUS Roaster Corp. LocationBarneveld TypeCoffee roaster Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous Motor0.55kW, 230/500 Volt MaterialStainless steel 1.4301 (304) With jacketcheck General No.1217 Year of constructionunknown Floor space2x2 m Total height1,9 m Weight910 kg Extra SpecificationsThis coffee bean roaster is electrically heated.Six heat spirals are mounted under the drum, with the hot air rising and being exhausted by a fan through the mixing chamber and blown off to a cyclone.The coffee roaster can be filled through the hopper.When ready, the beans can be unloaded by manually opening a valve.The beans enter the cooling vessel with grid. The built-in blower blows cool air through the beans.The vessel is fitted with an agitator to cool the beans evenlyProduct chamber size: Dia:450 x510 mmFeed hoppe ...