machines and plants for process engineering used for sale (7,467)

General SKU291Y478 MakeGWK TypeTeco WV Mach.No.14334013 Year of construction1996 Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity19 KW Temp.150 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:water Heating capacity18 kW Electric capacity19.5 kW Temperature150 °C Tank capacity10 l. With pumpcheck Capacity80 l./min Motor1,30 kW (400 V, 2850 rpm) With temperature controllercheck General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,10 x 0,32 m Total height0,95 m Weight100 kg CEcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other ph ...

General SKU291Y481 LocationBarneveld MakeUnknown TypeSD 40.12A Main Features MaterialStainless steel Motor1.5 KW Length900 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length900 mm Sizes stirring headø 300 x 50 mm Motor1,5 kW (400 V 1410 rpm) Speed mixing shaft306 rpm MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) General No.30893.10.1 Year of construction1998 Floorspace0,6 x 0,3 m Total height1,8 m Weight100 kg Extra SpecificationsInclusief IBC-clamp4 piecesConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConf ...

General SKU291Y483 LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor4.25 KW Specified Features - Sand mill Horizontal sand millcheck Capacity0,1 l. Housing dimensions ø 90 x 200 mm Inletcheck Outletcheck With jacket1,2 l. Max. temperature70 °C Motor4,0 + 0,25 kW, 400 V With gear boxcheck With ballscheck With pumpcheck Motor0,25 kW (230/400 V 1310 rpm) MaterialStainless steel 1.4571 (316Ti) With jacketcheck General MakeDraiswerke Serial56213 TypePML-H/V Year of construction2000 With switchgearcheck Floorspace0,70 x 0,80 m Total height0,70 m Weight200 kg Extra information Extra SpecificationsWith heating unit inside Volume 0,1 l Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pi ...

General SKU291Y485 MakeGWK Serial11936 TypeTeco cs 90 Pressure Working pressure3.8 Bar Main Features Heating (medium)Electric Capacity9.5 KW Temp.95 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Water Heating capacity9 kW Electric capacity9,5 kW With coolingcheck Capacity23 kW Temperature95 °C With pumpcheck Capacity60 l./min Motorcheck With temperature controllercheck General Mach.No.11936 Year of construction2002 LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace0,26 x 0,80 m Total height0,60 m Weight50 kg CEcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsC ...

General SKU291Y487 MakeLauda SerialX12217 TypeLTH140 P/SR 401P Pressure Working pressure7 Bar Main Features Heating (medium)Water glycol Capacity7 KW Temp.140 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity7 kW Temperature140 °C With pumpcheck General Mach.No.X12217 Year of construction1999 LocationBarneveld With switchgearcheck Floorspace0,30 x 1,00 m Total height0,68 m Weight150 kg CEcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid  ...

General SKU291Y490 MakeRVT TypeVJ 1.1 No.62910 Year of construction1986 Mounted on legscheck Main Features MaterialStainless steel Volume30 Ltr. Motor1.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity30 l. Vessel sizesø 440 x 500 mm Dished bottomcheck With covercheck Top connectionscheck OutletDN30 with manual valve With propellor stirrercheck Motor1,5 kW (380 V 2850 rpm) Speed mixing shaft1920—355 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) General LocationBarneveld With switchcheck Floorspace0,75 x 0,75 m Total height1,75 m Weight150 kgPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additive ...

General SKU291Y497 LocationBarneveld CEcheck MakeBecomix Main Features MaterialStainless steel Motor22 KW Rotor185 mm Specified Features - Inline mixer Rotor sizesø 185 x 40 mm Inletø 125 mm Outletø 65 mm Number of stages:1 Capacity1200 l./h With mechanical sealcheck Motor22 kW (400 V 3040 rpm) Rotor speed3040 rpm MaterialStainless steel 1.4404 (316L) General TypeDH 50 / DH 1200 No.04/2-503 Year of construction1994 Mounted on framelegs Floorspace0,55 x 1,00 m Total height0,85 m Weight350 kg Extra information Extra SpecificationsWith pressure vessel for mechanical seal, pressure 3 bar, volume 2 l. 22 kW, motor 2015 Generic medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsInline high shear mixersOils & f ...

General SKU291Y502 LocationBarneveld Main Features MaterialStainless steel Volume1.5 Ltr. Motor1 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions ø 105 x 200 mm Inletø 20 mm Outlet25 x 25 mm With jacketcheck Motor0,75 kW (380/220 V 2860 rpm (Ex)) Rotor speed2860 rpm Without ballscheck Capacity± 1,7 l. With pump3,6 l./min Motor0,12 kW (320/220 V 1400 rpm) MaterialStainless steel With jacketcheck General MakeDraiswerke Serial50215 TypePM 1 Year of construction1980 Floorspace0,8 x 0,5 m Total height0,85 m Weight100 kg Extra SpecificationsVolume 1 lPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsDraiswerkeIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chem ...

General SKU291Y508 LocationBarneveld MakeStephan TypeUMC 12-F No.719.063.01 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume12 Ltr. Motor1.8 KW Specified Features - Cutter Cuttercheck Capacity12 l. Diameter320 mm Depth200 mm Knife diameter200 mm Number of knife blades1 With scrapermanual Inletcheck Outletcheck With jacketcheck Motor1,8 kW, 380 V With variable speed drivecheck Speed150—2800 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General Year of construction1992 Mounted on wheelscheck With switchgearcheck Floorspace1,00 x 0,65 m Total height1,30 m Weight180 kg Extra information Extra SpecificationsWith vacuum pump, 0.37 kW, 220 V, 2700 rpm, Stephan temperature meter, and spare parts. Consumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganic ...

General SKU291Y511 MakeCondux TypeCUM 100 No.5988 Year of construction1992 Main Features MaterialStainless steel Shell (Material)Stainless steel Specified Features - Fine Impact Mill Grindercheck Rotor sizeø 95 mm Grinding room sizeø 100 mm With sieve cagecheck Housing dimensions ø 100 mm With hoppercheck Inletø 30 mm Feeding with vibro feedercheck Motorcheck With variable speed drivecheck Speed3000/6000 rpm Fine Impact Mills MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space0,90 x 0,60 m Total height1,60 m Weight200 kgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalFine Impa ...

General SKU291Y512 LocationBarneveld CEcheck MakeFryma TypeML/MK 180 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter100 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 115 x 40 mm Teethed rotorcheck Inletø 100 mm OutletDN50 Motor18,5 kW (380 V 2925 rpm) MaterialStainless steel 1.4435 (316L) General No.M15177/78 Year of construction1991 Mounted on framecheck Floorspace0,9 x 0,65 m Total height1,5 m Weight270 kgPaints & coatingsGeneric medicinesOintmentsBiotechnologyFeed additivesDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyColloid millsConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicOils & fatFrymaIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additiv ...

General SKU291Y513 MakeKrahnen LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Miscellaneous Capacity400 mm MotorAir Capacity6 bar MaterialStainless steel General TypeKrahnen Airflex 30 Type 4 No.201186 Year of construction1999 Floor space1,40 x 0,65 m Total height1,00 m Weight90 kg ATEX designedcheck Extra information ATEX marking: G + D (gas and dust)Suitable for use in zones 1 / 2 / 21 / 22Drive: compressed air, 4–8 barAir consumption: 61–90 m³/hNumber of brushes: 1 (hard, natural fibre)Brush pressure: 0.25 N/cm²Working width (brush): 400 mmSuction capacity: 148 m³/hFresh water tank volume: 10 lDirty water tank volume: 11 lEX vacuumcleaner Consumer wastePaints & coatingsMiscellaneousPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic  ...

General SKU314Y648 MakeQVF Engineering GmbH / De Dietrich Serial70083 TypeADB865 Reactor 100 L Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor0.65 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity100 l. (128 l.) Vessel sizesø 600 × 530 mm Dished bottomcheck Dished top sidecheck Top connectionsDN25 — DN80 OutletDN50 bottom outlet valve With jacketcheck Max. temperature—85 / 200 °C With propellor stirrercheck Motor0,65 kW (230/400 V 1400 rpm (Ex)) Speed mixing shaft0—600 rpm With jacketcheck Glass Reactors MaterialGlass, Glass - Enamel (3009U) General Year of construction2009 Mounted on legscheck LocationBarneveld Floorspace2,37 x 1,2 m Total height3,3 m CEcheck Extra information Extra SpecificationsDesigned for GMP l ...

General SKU440X1408 MakeAllgaier-Werke TypeAVTM 2000/1 No.3721 Year of construction1994 LocationBarneveld Main Features MaterialMild steel/Stainless steel Surface2.6 m2 Sizes diameter2000 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2.6 m2 Number of sieve decks:1 With covercheck Inletø 300 mm Outlet2x ø 200 mm Drive vibro motorcheck Motor2,2 kW (380 V 1430 rpm) With air cleaningcheck With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4552 General Mounted on mild steel framecheck Floor space2,60 x 2,60 m Total height1,50 m Weight1000 kg CEcheckPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFo ...

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

TAWI blower model SA350/Z Motor 3 kw 2900 rpm 50 hz 220 v Transportation Information Length 750 mm Width 500 mm Height 600 mm No documentation In your state

Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW No documentation Unused

Wall-mounted refrigerator from the brand RITTAL model BLUE e+ SK3189940 No documentation In your state

General SKU035U280 MakeBehälter, Apparate- u. Maschinenbau, Kürten No.6380-2 Year of construction1989 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket32 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume5750 Ltr. Specified Features - Stainless Steel Reactor Reactor(1x) Capacity5750 Ltr Vessel sizesdia. 1800x1750mm Dished bottomcheck Dished top sidecheck Manholedia. 600mm Top connectionsdia. 300mm + 2x dia. 200mm + 3x dia. 150mm Outletdia. 100mm Half coil jacketed(150 Ltr) Max. temperature250 Degr. C. Without motorand without stirrer With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace2,30x2,30 m Total height3,2 M Weight2750 kgPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalGreen FridayRubberAg ...

General SKU251Y229 LocationBarneveld MakeHeraues Main Features MaterialStainless steel Volume300 Ltr. Max.temp.200 °C Specified Features - Drying oven Drying ovencheck Max. temperature200 °C Number of compartments:1 Capacity300 l Internal width570 mm Internal depth600 mm Internal height900 mm Electric heatingcheck Electric capacity10 kW (380 V) Number of doors:1 With air circulationcheck With fan(230 m³/h) Motor0.13 kW (380V, 2810 rpm (Ex)) With racks(8x) MaterialStainless steel 1.4301 (304) General Serial83152-01 TypeFT60/200EX G4-G2/C Year of construction1983 With switchcheck Floorspace1,0 x 1,2 m Total height1,5 m Weight650 kg ATEX designedcheck Extra information Extra SpecificationsModifiel with new controls, ex Consumer wastePaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBio ...

Manufacturer: Omipa Year of Construction: 1992 Model / Type: Omipa 120/90/45 Type of Machine: Extrusion Line Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used slow speed ball mill for the production of chocolate creams made by Techmasz model: WMK350. New 2019. The offer consists of: - 2x WMK350 ball mill - 2x chocolate pump with water jacket + piping - 1x DUO fat melting tank The slow-running ball mill was manufactured mainly for the food industry. Its technical parameters allow it to meet the high requirements of this industry. Technical data: - Mixer drive: Nord SK2282 VF - 112 MH/4 geared motor controlled by NORD inverter type SK500E-401-340 - Coupling type: Maintenance-free flexible torsion coupling size 75 with 92 Sh A coupling. - Agitator speed control: In the range 20-80 rpm - Noise level: Less than 85 dB(A) - Ball diameter/type: 13 mm/91 kg (approx. 10000 pcs.) - Usable volume of mixing chamber: Min. 11.50 l., Max. 342.00 l. The total capacity of the mixing chamber is 346 litres - The usable capacity of the m ...

General SKU064Y439 MakeHoeksma &: Velt Leeuwarden Year of construction1990 LocationBarneveld Pressure Working pressure0.5 Bar Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume800 Ltr. Motor1.5 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity800 Ltr Vessel sizesdia. 850x1250mm Dished bottomcheck Dished top sidecheck Top connectionsdia. 150mm + dia. 125mm + 6x dia. 50mm Outletdia. 80/40mm With jacketcheck Max. temperature100/200 Degr. C. (vessel/jacket) With paddle stirrerJongia, type LM-40 (Flat blade/Rushton mixer) Motor1,5 KW, 380 Volt Speed mixing shaftvariable With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4301 (304) General Floorspace1,4x1,4 M Total height2,8 MPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalGreen FridayRubberAgrochemicals ...

Stock number: R1158, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator type: 3-blade propeller, Agitator placement: For mounting in top flange, Propeller size: D 100 mm, Motor: 0.37 kW - 230 Volt - 1400 rpm

Stock number: R1188, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Standing: On a stand, Agitator type: Propeller, Axle length: L 190 mm, Motor: Variable speed; 0,6 kW - 220 Volt, Other: Excl. propeller

1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capac ...

Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement.

Used homogenizer from J. Beil Automation+Vertrieb type BHV 700.