machines and plants for process engineering used for sale (7,658)

Manufacturer: Stäubli Model: RX160 Year of Manufacture: 2018 Type of Machine: Operating Hours: 500 h Mass: 248 kg / 546 lb Nominal Payload: 20 kg / 44 lb Robot Arm Specifications: - Model: RX160 (Series 160) - Configuration: 6-axis - Mounting: Floor-mounted - Arm Length: Standard - Color: Standard RAL 1028 (Melon Yellow), textured paint, satin finish - Integrated: Two solenoid valves for compressed air - Lubrication: H1 Food Grade Oil - Mechanical limit on Axis 1 - Brake selector switch with 5 m cable to separate box Controller: - Model: CS8C - VAL3 Controller - Operating System: SRC Version 7.x - Version: Built-in (IP20) - Power Supply: MULTI 3x400V, 50/60 Hz - Cooling: Standard cooling with airflow from bottom to top Cabling & Connections: - 15 m robot connection cable, double pluggable (arm + controller) - Angled outlet plug on the arm (right side) - Side connection at t ...

Netzsch Omega 60 homogenisator with control cabinet. Rated flow: 60 liter/hour Maximum pressure: 700 bar.

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Second hand crushing mill. Hopper dimensions: - Length 1410 mm - Width 1650 mm - Height 2600 mm Technical features Model PC66120 Machine motor 90 kW (120 cv) - 1480 rpm Equipment configuration Electrical panels Hydraulic power pack Transport information Length 2700 mm Width 2600 mm Height 1800 mm Documentation Maintenance Manual Operation Manual Drawings Electrical Diagrams Condition As is Made by Tallants Navarro

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter and a hopper. Material 316/316L stainless steel Transport information Length 2300 mm Width 2000 mm Height 2000 mm Weight 1500 Kg Condition As is Made by Unknown

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

Nucha filter dryer manufactured by BONAZZI MARIO, model BM 12000, with a total volume of 18050 liters. Material To be determined Technical features Model BM 12000 Year of manufacture 2001 Condition As is Made by BONAZZI MARIO

Vertical thin layer evaporator with 1 m2 heating surface Features: Heating surface: 1 m2 Maximum jacket pressure: 7 bar Interior pressure: atmospheric or vacuum Engine Rpm: 1,500 (4 hp) Rotor Rpm: 1,100 Documentation: ATEX Certificate Volume Maximum flow rate L/h Material To be determined Transport information Length 3100 mm Width 950 mm Height 1250 mm Documentation ATEX certificate Condition As is Made by Unknown

Filter manufactured by TWIN FILTER, model HPF 18-D-14. Filter cloth diameter: 435 mm Number of cloths: 14 Material 316/316L stainless steel Technical features Model HPF 18-D-14 Year of manufacture 2012 Vessel working pressure 6 bar Vessel working temperature 90 ºC Half-coil/jacket working pressure 6 bar Half-coil/jacket working temperature 90 ºC Half-coil/jacket volume 3 L Total vessel volume 188 L Transport information Length 1000 mm Width 950 mm Height 2100 mm Filtration area Filtration area 2 m² Condition As is Made by TWIN FILTER

ATEX basket centrifuge manufactured by ROUSSELET ROBATEL in 2017, model RC20VXR. Material 316/316L stainless steel Technical features Model RC-20-VXR Year of manufacture 2017 Maximum load (density 1.25 kg/dm³) 2.5 Kg Useful load 2 L Machine motor 400V / 50Hz Maximum speed 3000 rpm Equipment configuration ATEX Feeding pipe Cake washing pipe ELECTRICAL PANELS Lamp Suspension: on inertia plate + silent blocks Dimensions Basket diameter 200 mm Transport information Length 2100 mm Width 1200 mm Height 2000 mm Condition Unused Made by ROUSSELET ROBATEL

Second-hand decanter made by FLOTTWEG, model Z53-4454. Maximum bowl speed: 3250 rpm Max. sediment removal rate: 1,3 kg/dm3 Min/max product temperature: 0/100ºC Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Documentation CE Certificate Maintenance Manual Operation Manual Drawings Spare parts list Condition Inspected Made by FLOTTWEG

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Volume Total capacity 20 L Material Borosilicate glass 3.3 Jacket or half-coil material To be determined Condition New Made by STEROGLASS

Kilolab reactor made of 3.3 borosilicate glass, with stirring and jacket, and a capacity of 50 liters. BODY Design pressure -1/0.5 mbar Design temperature -50/200ºC Temperature delta 80ºC Maximum vacuum 5 mbar Volume Total capacity 50 L Material Borosilicate glass 3.3 Jacket or half-coil material To be determined Technical features Vessel working pressure -1/0,5 bar Vessel working temperature -50/200 ºC Equipment configuration Agitator Jacketed Transport information Length 800 mm Width 1000 mm Height 2200 mm Condition New Made by Unknown

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

Vacuum reactor model BACHMIX with a total capacity of 340 liters, manufactured by BACHILLER. Mounted on a stainless steel structure. Hydraulic system for lid lifting. Equipped with three agitation systems: Anchor-type agitator with Teflon scrapers + two two-blade axial turbine propellers at different heights Cowless agitator Turrax agitator Volume Total capacity 340 L Material 316/316L stainless steel Technical features Model BAXHMIX PC200 Vessel working pressure -1 bar Vessel working temperature 140 ºC Half-coil/jacket working pressure 2.5 bar Half-coil/jacket working temperature 140 ºC Half-coil/jacket volume 56.6 L Equipment configuration Jacketed Electrical panels Dimensions Inner diameter 800 mm Shell height 620 mm Transport information Length 2450 mm Width 1350 mm Height 1950 mm Documentation CE Certificate Operation Manual Drawi ...

Manufacturer: KUKA Model: KR 100-2 PA Year of Manufacture: 2009 Weight: 1240 KG Work Area Dimensions: - A: 2,180 mm - B: 3,037 mm - C: 3,200 mm - D: 2,160 mm - E: 1,040 mm - F: 1,350 mm Total Volume: 72.7 m³ Techincal Details: - Maximum Reach: 3,200 mm - Payload Capacity: 100 kg - Additional Load on Arm/Swing/Carousel: 50 kg / ~200 kg - Maximum Arm & Swing Load: 50 kg - Total Maximum Load Capacity: 350 kg - Number of Axes: 4 - Mounting Position: Floor-mounted - Design: Standard - Position Repeatability: ±0.25 mm - Path Accuracy: Not specified - Controller: KUKA KRC2 Edition 2005 - Weight (Without Controller): Approx. 1,200 kg - Operating Temperature Range: +10°C to +55°C - Protection Class: IP65 (Dust & Water Resistant) - Installation Footprint: 1,006 mm × 1,006 mm - Power Supply Requirement: 13.5 kVA - Noise Level: < 75 dB

300 litre stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitation, jacket and electrical panels. Motor characteristics: 43.19 kw at 50 Hz 400 V

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Stock# U2458-1 Used vertical stainless steel 1.4571 (AISI 316Ti) mixing tank by Heidelmeier (DE) with total volume 9000 l. Working volume up to 6000 l. Tank has internal diameter 2470 mm x length of the straight wall 1700 mm. Top flat, with bolted cover. There is an inspection manway with manually rised cover. Bottom welded, conical with central discharge. Tank is equipped with side wall agitator, type "jet stream" by Ystral type TFW-4. Driven directly by el motor 11 kW, 1475 rpm, 400/690 V, 50 Hz. Tank is mounted on 4 stainless steel legs. Last time used in chemical production.

Stock# U2456-2 Used two shaft dissolver by Vollrath (DE) model VDDX 15. Machine has two shafts, each with length 69 cm. Centers of the shafts are in distance 165 mm. One shaft has mounted two toothed discs, each with diameter 170 mm - distance between discs - 5 cm. Second shaft has one toothed disc with diameter 170 mm. Shafts are belt driven by el motor 10 kW, 1465 rpm, 380 V, 50 Hz Ex proof design (EExeIIte). Working rotation of shafts adjustable mechanically up to 3000 rpm. Dissolver has also baffle/scrapper agitator, with manually adjustable position. Top rised mechanically, driven by gearbox and el motor 0.55 kW. Mixer is equipped with stainless steel mixing pan with diameter 600 mm x length of straight side of wall 470 mm. Total volume about 130 l, working - 100 l. Discharge outlet on the side wall, equipped with manually operated valve. Mixing pan is mounted on carbon steel mo ...

Dosage

REITZ RW40300400 agitator for tank containers 4.0 KW / 300 rpm and inclined blade stirrer Worm gear motor IE3: Three-phase motor Moll 3 x 230/400 Volt, 4.0kW, IP55, n1 = 1440 rpm, n2 = 300 rpm, worm gear, i = 1:5, plug-in shaft as output shaft D = 28 mm. 5 m cable and motor protection plug. Shaft: Precision stainless steel shaft D30, length 2000 mm, diameter 30 mm, Material: stainless steel. With 2 x 1000 mm pitch and additional rigid coupling. Coupling: 2 pieces rigid coupling, 1x 28/30, 1x 30/30 mm, material stainless steel Agitator: 2 pieces of double-bladed oblique blade stirrers, diameter 400 mm, material stainless steel 1.4571, welded version. Truss: With 1 piece mounting frame approx. 400 mm x 2600 mm Each longitudinal strut 2600 mm consists of 2 mounting rails 41 x 82 mm profile. With diagonal struts and angles for fixation on tank frames. Frequenc ...

Fristam FP 752/250 VB - High-pressure centrifugal pump - 45m3 at 12 bar - 30 kW - Double schaft seal - Serial numbers: 0482550073 + 0482550074 - Excellent condition 2 pumps available

--> powder scale.