machines and plants for process engineering used for sale (7,403)

Used matrix with a capacity of 300 litres, acid-resistant design. Mixed cream or gel masses. Motor power 0.4 kW. Weight 260 kg.

Used Stork Wolf model MRS-2500.

Used vacuum tumbler by Nowicki model MA-5-2000 PS. The device will be perfect for meat processing plant for massifying and tenderising meat. Model: MA - 5- 2000 PS Power: 4,1 KW Weight: 1190 kg Capacity: 2000 litres Intake: 1200 kg Bowl speed: 0 - 9 / minute Length: 2860 cm Width: 1335 cm Height: 1670 cm

Used automatic cutter-mixer-emulsifier by Karll Schnell type FD9. Without emulsifying motors.

Used stainless steel conical mixer for bulk materials type MR-05. New 2015. Capacity 3000 L Rotational speed of screw 320 rpm, Power 5,5 kW, Total weight 500 kg.

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container  ...

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: KD 613-G Year of Make: 1980 Degree of protection: IP 44 Speed: 455 rpm Operating voltage: 380 / 660 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 266 L/min. Dimensions: L 1900 x W 1000 x H 800 mm Curb weight: Approx. 1500 kg Condition: Used Price: On request

- Type: RS 10 (Rotoscreen) - Year of construction: 2003 - Consisting of a fixed and a movable slat grille - Material: stainless steel

We offer you a sand classifier / sand separator from MEVA. - Type: SKS 100 E - Year of construction: 2003 - Integrated ventilation

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

Model: C746 No. Of Shelves: 4 Dimension cm: 62x100 Loading surface sq. M: 3,7 Distance between Shelves mm :120 Min temp. Of Condenser ºC : -70 Condensing nominal capacity KG :74 No. Of Trays 310x480x40mm: 24 Trays 300x600x40 mm Overall Dimensions Width A mm: 900 Depth B mm: 2600 Height H mm : 2000 Electric Control Cabinet Width A mm : 770 Depth B mm : 550 Height H mm : 1920 -Specifications are not binding- Refrigeraton Units : dimension according to plant location Power KW (approx) : 25 Total weight Kg : 2900 Ampuls Ø 13: 21.120 Ø 22: 7.440

ALEXANDERWERK ROLLER COMPACTOR, MODEL BT 120 PHARMA Year of construction: 2016 With a benchtop design providing a throughput of up to 8 kg/h (based on lactose). Specially designed for use in research and development areas. Can be used for granulation of biological compounds and active ingredients. TECHNICAL DATA Roller size Roller diameter: 120 mm Roller width: 25 mm Production details Maximal pressure force: 20 kN/cm Maximal roller gap: 4 mm Maximal roller speed: 15 rpm Throughput, continuous operation: up to 8 kg/h (lactose) Size Dimensions (H x W x D): approx. 621 mm x 897 mm x 977 mm Weight (incl. control system): approx. 425 kg The modular design guarantees fast changing and cleaning of all working tools and meets the requirements for flexible working Due to of its modular design, the process technology of the machine can be completely disa ...

New Unused 2016 FEDEGARI XFSW7 Eco-Steam Washer This listing is for one of two brand new 2016 FEDEGARI XFSW7 Eco-Steam Washers complete with trolleys, controls and documentation. A high-end two door GMP washing solution, the XFSW7 (part of FEDEGARI’s FSW range) combines impeccable cleaning results with impressively low operational costs over conventional hot-water systems. This offering represents a unique opportunity for investment in a best-in-class machine, unused and in the original packing, at a fraction of the original retail price. Applications include uses in the food, bio-pharmaceutical, laboratory and cosmetic sectors with suggested loads including machine parts, tools and glassware. Key Information Unit Dimensions (LxWxH): 2300x1690x3000mm Dimensions of Inlet: 1200x1200mm Chamber Depth: 1200mm Door Type: Vertical Sliding Doors Voltage: 400v Three Phas ...

1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. The unit is unused, as good as new. Max. usable cabine dimensions: 670 mm (height); 610 mm (width); 750 mm (depth).

Specifications: Indicative thermal dissipation, doors closed: side 1 - 0.9 kW, side 2 - 0.9 kA, Maximum operating pressure: 3 bar g Approximate weight of empty autoclave 5000 kg Power supply 400 V 50 Hz, 19 kW Pressure (bar g) Flow rate size P1 water recovery from chiller 1,5 120 l/min 34.8x1.65 P1 water from chiller for exchanger 2 120 l/min 34.8x1.65 G water for empty pump 2 20 l/min 15.75x1.65 E1 industrial steam for gap 3 250 kg/h 22.1x1,65 E1 saturated steam ( 95-97%) 3,5 800 kg/h 47.5x1,65 D1 oiled compressed area for tools 5,5 100 NL/min 9.4x1.65 D oiled compressed area for chamber3,5 300 NL/min 34.8x1.65 A general discharge 72.9x165 FIELDS OF APPLICATION The FOA air-steam mixture sterilizer is suitable for: - Sterilization of parenteral solutions, liquids in closed non-deformable containers (e.g., glass tubes) and liquids in closed deformable containers (e.g., ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

36,000 m3 thermal oil supply system/exhaust air purification plant (special plant construction) WK, Year of construction: 2012, with heat recovery and cooling supply, The system is currently designed for two printing systems. Depending on the Machine equipment for 3 - 4 printing systems. The system consists of the following components: - 1 roof-mounted thermal post-combustion system / exhaust air purification WK Thermal Engineering Plant, boiler and apparatus construction WKTNV, year of construction: 2012, exhaust air volume at the inlet 36,000 m³/h, maximum permissible combustion chamber temperature max. 730 °C, burner type WK/H1 gas cone, Burner power 6,600 kW, fan power 200 kW, maximum permissible inlet temperature 210 °C, Maximum permissible solvent throughput 500 kg/h, natural gas heating medium, calorific value of the heating medium 32693 kJ/m³, max. heating fuel con ...

Used vibration ito Virto-Cuccolini VPB 800 1/X. Year of construction 2023. Sieve for food powders and granules. Construction: - Parts in contact with the product made of AISI 304 acid-resistant steel - Other parts made of galvanised plain steel - Cover with D200 inlet, D200 inspection and D100 vent; complete with clamping ring and silicone V-gasket - Sieve deck H=118 mm with mesh support ring, with outlet D150; Silicone gaskets - Mesh wire diameter 0.16 mm, height 2850 mm, hole 0.25 mm in AISI 304 - Mesh support ring for size 800 tensioned in AISI 304 satin finish (fin. 3). Tension rings included. - Mesh opening 0.397 MM - AISI 304 - Sieve bottom with outlet D116 - 0.73 kW, 230/400 V 50 Hz, 4-pole vibration motor - Installed on the flange spring holder and on the 3-wheel trolley made of acid-resistant steel - Control panel ON/OFF - Sieve complete with Atex components and ce ...

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

Used centrifuge made by Alfa Laval, type VNPX 310-SGV-34. 1420-1500 Rpm. The previous owner doesn't have technical documentation.

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Laboratory mixer Papenmeier, 3l and 10l pot available

Machines No 53423, 5.5KW incl. soundproof booth

Subject to prior sale - errors possible! Internal reference number: M-1190

Subject to prior sale - errors possible! Internal reference number: M-1189

Subject to prior sale - errors possible! Internal reference number: M-1188

Sludge filter system in sea containers Specifications: - Sludge filter press JUNGHANS with cylinder unit + conveyor belt - Flocculation plant -Pump - Control cabinet with electrical equipment - Aluminium water drip tray in the entire container floor -Lighting - Sea container 4 doors - Space requirement approx. W 6.0 x H 2.4 x D 2.4 m - Weight approx. 5000 kg - Separate conveyor belt L 8.0 m

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30