machines and plants for process engineering used for sale (7,636)

Nitrogen cooling bath, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...

Used milk centrifuge made by Spomasz, type: LWG-47 (Alfa Laval replacement). 6 pieces available.

Used Self-cleaning milk centrifuge. Technical parameters: type: Alfa – Laval MRPX 214 self-cleaning nominal capacity 12,500l/h Siemens control and inverter for the main drive motor foundation slab made of acid-resistant steel water treatment kit made of acid-resistant steel main engine 15kW

Used LOOS DF 1000 steam boiler. Technical parameters: "WEM" type water treatment module water preparation module type "WSM-T 2.0" LOOS-DAMPFFIX steam generator type "DF 100010", new: 2006 total volume 110l max pressure 13Bar max temp 195 degrees Celsius 2,000L fuel oil tanks complete steam reduction station 10bar/4bar hot water preparation station with a 400l tank copper coil water treatment system

New filtercyclone made by Bühler. New sheepskin. Fan included.

Used colloid mill made by Młynkol type KMH700. New 2005. Power - 11 kW. Rotation - 2900 rpm. Reported output 700-1000 kg/h. Weight - 185 kg.

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

GEA Heat Exchanger NT 50 T CDS-10 for sale.

Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel

Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Processing plant Manufacturer: KORUMA Maschinenbau (Neuenburg) Year of construction: 1987 with processing vessel (diameter: approx. 300 mm) with 2 feed tanks, 1 of which is double-jacketed (diameter: approx. 150 mm each) with scraper agitator with sight glasses with temperature gauge with control cabinet & control mounted on a stainless steel frame very good condition LWH: 1100 x 750 x 1450 mm

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, radiator, thermostat.

Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...

Used ATEX agitator RW0252800300 – 0.25 KW – 2800 rpm. For smaller containers and drums. ATEX II 2G EEx e II T3 Electric motor: Electric motor VEM motors Thurm GmbH, 0.25 KW, 2-pole, 3 x 230/400 volts, 2800 rpm, IP55. Weight approx. 8 kg. With motor protection plug. Iso F, suitable for frequency converters. Shaft: Precision stainless steel shaft D10, length 500mm, diameter 10mm, Material: Stainless steel 1.4301. With rigid coupling stainless steel 1.4571. Agitator: Double-bladed inclined blade stirrer, diameter 244mm, Material: Stainless steel 1.4571 With PTB-ATEX test certificate.

Rotary Vane Pump / Vane Pump PF037200 Electric motor 400 V, 0.37 KW, 1410 rpm Brass Rotary Vane Pump with Clamping Ring Pumping capacity litres per hour: 200 l/h, G 3/8"

EVERDRY Absorber for Compressed Air DN600 x 1700

Air Operated Diaphragm Pump by Flux Model : FDMX/M1 No.3656

Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3: Burkert T CUT Core UF200-125 075 3659 – 3.6 m x 80 pieces. Each membrane contains 19 filter tubes, i.e. these are AC19 membranes. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW

Manufacturer: PCM Type: Moineau 13L10 Nominal diameter: DN50 Flow rate: up to 13,000 l/h Operating pressure: up to 6 bar Incl. overhauled replacement pump (without motor)

Manufacturer: KSB Type: KRTF 80-25C Power: 7.5 kW Weight: 150 kg

Submersible Flygt 3201.091-9980003 Power: 30 kW / 400V Weight: 490 kg Individual sale possible

Jetstream mixer Manufacturer: Ystral Type: X50/10 (Multipurpose) Machine No.: 2379929 Year of Construction: 2007 with two interchangeable mixing tools infinitely variable speed up to 10,000 rpm on a mobile tripod (stainless steel) height-adjustable with hand crank LWH: 870 x 800 x 1700 mm

Sanding plant, coating plant used Manufacturer: unknown Type: Sanding width approx. 1500 mm 380 V Total dimensions approx. : 3250 x 2250 x 3000 mm The plant was used for sanding Eternit panels. Changes and errors in the technical data, specifications and prices as well as prior sale

Cooling tower with 950 kW cooling capacity, used as extruder cooling. Complete plant with water treatment, plate heat exchanger, switchgear, pumps. Cooling tower for outdoor installation in stainless steel with 2 fans of 15 kW each. Very energy-saving cooling system in mint condition. Due to relocation.

Agitator tank with 3800 l capacity. Container in stainless steel 1.4301. Agitator motor 11 kW, 98 rpm.

MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw