machines and plants for process engineering used for sale (7,658)

1 large evaporative condenser plant, manufacturer Thermofin GmbH Prod. No. 703543-010-001; Type: TACD=90-1-29-N B%. Year of manufacture 2008 permissible Operating pressure 21 bar Curb weight 4,500 kg with frame and walk-through platform all around standing on the roof, with frame for sale In very good maintained condition, immediately available

2 identical evaporative condensers with 6 fans each with frame standing on a roof Year of manufacture 2002, in the best maintained condition is written as parked on the frame

Subject to prior sale - errors possible! Internal reference number: M-1190

Subject to prior sale - errors possible! Internal reference number: M-1189

Subject to prior sale - errors possible! Internal reference number: M-1188

Sludge filter system in sea containers Specifications: - Sludge filter press JUNGHANS with cylinder unit + conveyor belt - Flocculation plant -Pump - Control cabinet with electrical equipment - Aluminium water drip tray in the entire container floor -Lighting - Sea container 4 doors - Space requirement approx. W 6.0 x H 2.4 x D 2.4 m - Weight approx. 5000 kg - Separate conveyor belt L 8.0 m

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Dissolver Agitator Geppert Mixing Technology SV 30 Power 0.55 kW Speed range 350-1500 1/min Switchboard with integrated FU mobile, mobile on castors Very good condition, straight from production

Dissolver Pendraulik Disperlux TD 200 EX protected design Power 1.5 kW Speed range 930-8400 1/min Very good ready-to-use condition, straight from production

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

Main voltage: 400V, 50Hz Air pressure: 5-6 bar

Powder disperser Manufacturer: Pierre Guérin Type: F2116 Machine No.: 9914350 Year of Manufacturing: 1989 Power: 2.2 kW very good condition with hopper (diameter: 610 mm; height: 500 mm) on a mobile stainless steel frame with control panel with power plug LWH: 1000 x 550 x 1410 mm

Powder disperser Manufacturer: Ytron Type: XC1/1/5.50-2 Machine No.: 03030247 very good condition with control cabinet and control system with hopper (diameter: 470 mm; height: 700 mm) on a mobile stainless steel frame LBH: 1050 x 500 x 1600 mm

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm

Nitrogen cooling bath, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...

Used milk centrifuge made by Spomasz, type: LWG-47 (Alfa Laval replacement). 6 pieces available.

Used Self-cleaning milk centrifuge. Technical parameters: type: Alfa – Laval MRPX 214 self-cleaning nominal capacity 12,500l/h Siemens control and inverter for the main drive motor foundation slab made of acid-resistant steel water treatment kit made of acid-resistant steel main engine 15kW

Used LOOS DF 1000 steam boiler. Technical parameters: "WEM" type water treatment module water preparation module type "WSM-T 2.0" LOOS-DAMPFFIX steam generator type "DF 100010", new: 2006 total volume 110l max pressure 13Bar max temp 195 degrees Celsius 2,000L fuel oil tanks complete steam reduction station 10bar/4bar hot water preparation station with a 400l tank copper coil water treatment system

New filtercyclone made by Bühler. New sheepskin. Fan included.

Used colloid mill made by Młynkol type KMH700. New 2005. Power - 11 kW. Rotation - 2900 rpm. Reported output 700-1000 kg/h. Weight - 185 kg.

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

GEA Heat Exchanger NT 50 T CDS-10 for sale.

Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel

Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.