machines and plants for process engineering used for sale (7,499)

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Stainless steel centrifugal pump manufactured by APV.

Stainless steel centrifugal pump

Stainless steel centrifugal pump manufactured by INOXPA.

Stainless steel centrifugal pump.

Centrifugal pump made of stainless steel reconditioned and tested.

Centrifugal pump manufactured in stainless steel

Centrifugal pump manufactured in stainless steel.

Material : areas in contact with the product in stainless steel Volume : 80 ltr. Drive : 10 KW Screw drive : 6,8 KW Operating temperature: 250°C Pressure inside : - 1 bar.

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

Head 4m, 63l/min,

Agitator RW151000300: 1.5 KW – 1000 rpm. Electric motor: Electric motor Siemens or WEG 1.5 KW, 6-pole, 3 x 230/400 Volt, 1000 RPM, IP55. Weight approx. 30 kg. With motor protection plug. Suitable for frequency converters. Shaft: precision stainless steel shaft D30, length 1000 mm, diameter 30 mm, Material stainless steel 1.4571. With rigid coupling stainless steel 1.4301. Agitator: 4-leaf inclined blade stirrer diameter 300 mm. Material 1.4571. Suitable for larger containers of breweries, dairies etc.

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6845 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Motor characteristics: Power 2.1 kW Rotational speed 690 rpm Reducer characteristics: Rotational speed 15 rpm

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6843 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Reducer characteristics: Rotational speed 15 rpm

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6842 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Motor characteristics: Rotational speed 1400 rpm Reducer characteristics: Rotational speed 25 rpm

USED HOSOKAWA PC 600 GRANULATOR REF.: C5705 General characteristics: Manufactured by HOSOKAWA Model PC 600 Year built 2001 Motor characteristics: Voltage 230/400 V Current 5.7/3.3 A Power 1.5 kW Frequency 50 Hz - 3f Rotational speed 1435 rpm Reducer characteristics: Rotational speed min. 63 o max. 316 rpm

USED TITANIUM CENTRIFUGAL PUMP REF.: C5811

Washer for efficient and gentle washing of ampoules, vials and bottles. Output: up to 2'500 vials/h. Machine comes with format parts for 5-, 10- and 20 ml vials.

Steam air sterilizer for the counterpressure sterilization of aqueous solutions in sealed containers. Pass-through autoclave with semi-automatic doors on two fronts. Hydraulic system made entirely of stainless steel. Capacity: 1470 litres. Operating temperature: 138.9°. Chamber size: 800 x 800 x 1250 mm (depth).

Hot air sterilization for dry heat sterilization and depyrogenation. Autoclave with single-leaf door on both sides. Operating temperature: 160/250°. Chamber size: 1000 x 1450 x 1450 mm (depth).

USED BACHILLER STAINLESS STEEL BEATERS MILL REF.: C4750 Beater mill with a mobile disk with hard wear resistant steel plates. It can be used by two edges, against a static track. It is considered a cold mill because of the high air flow it generates.

USED TEFSA EHR 1200-16 FILTER PRESS REF.: C5899 Used EHR-1200/16 filter press manufactured by TEFSA. Currently it is provided with 19 plates of 1200x1200 mm but it has a capacity of 29 plates General characteristics: Manufactured by TEFSA Model EHR 1200-16 Type Press filter Year built 1993 Weight 13.300 kg With complete documentation Overall dimensions: Total length: 7,305 mm Total height: 2,000 mm Total width: 2,000 mm General characteristics: Working length: 1900 mm Hydraulic central motor power 5.5 kW Turning motor power: 1.5 kW Working pressure: 16 bar Closing pressure: 390 bar Technical characteristics: Work pressure 16 bar No. of plates 19 (ampliable a 29) Panel surface 1200x1200 mm Filtration area 40 m2 (ampliable a 60 m2) Volumen de torta 602,3 dm3 (ampliable a 920 dm3) - espesor 30 mm Hydraulic equipment 5.5 kW

USED 10000 LITRES STAINLESS STEEL 316 TANK WITH 18 M2 EXCHANGER REF.: C3315 Horizontal tank made of 316L stainless steel with a capacity of 10,000 liters. 2000x3500x10 mm shell 8 mm thick klöpper bottom In the top bottom shell there is a DN450 manhole, a connection to the DN500 column, two DN50 supply inlets, a DN40 safety valve, two pressure probes 1/2 "Gas, a DN25 nitrogen inlet At the bottom there is a DN80 outlet On the side there are 3 outputs for DN80 sight glasses and a DN25 temperature probe On one bottom there are two DN80 outputs and on the other bottom there is an exit with DN300 coil. On 4 legs. General characteristics: Material Stainless steel 316L Technical characteristics: Capacity 10.000 L Bottom type Klopper

USED STAINLESS STEEL 40.000 LITRES TANK REF.: C9070 Horizontal tank made of stainless steel by AGUILAR Y SALAS with a capacity of 40,000 liters. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel Year built 1987 Weight 4060 kg Design pressure atm Design temperature 35 ºC Test pressure lleno de agua Technical characteristics: Capacity 40.000 l Bottom type Klopper Vessel outside diameter 2800 mm Vessel height 5500 mm

USED STAINLESS STEEL 16.000 LITRES JACKETED TANK WITH INNER COIL REF.: C6285 Vertical tank made of stainless steel with a total capacity of 16,000 liters. Klopper top bottom with manhole, sight glass, sight glass for spotlight, lifting lugs, central stirring flange and flange-type connections. Jacketed klopper lower bottom with inner coil and bottom discharge. On 4 brackets. General characteristics: Material Stainless steel Technical characteristics: Capacity 16.000 litros totales Bottom type Klopper Camisa En el fondo inferior On 4 brackets Ears x2 Man hole x1 Peepholes x2 Vessel outside diameter 2500 mm Vessel height 2750 mm Vessel height + funds (TOTAL: 4400 mm)

USED BLISTER PACKING MACHINE REF.: E0011 Description: SIEBLER HM1 1/160 blister packing machine manufactured in 1997 by ROMACO. With a power of 6.5 kW.

USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000