machines and plants for process engineering used for sale (7,658)

Available in stock 1 x Used Azcue sludge pump model 1YE. The equipment is used but in good working conditions. H: 20 m Flow: 1 m3/h

Available in stock 3 x Used Azcue HFO Booster Pumps model BT-HM 38D2. Equipment is used but in good working conditions. Height: 50 m Flowrate: 3.5 m3/h

Reactor made of stainless steel with a capacity of 500 liters. Top bottom with manhole of 400 mm diameter with three bolts. Additional inlet of 30 mm diameter. Temperature probe up to 100ºC. Probe to add product during the dispersion. 2 electrical resistances of 400 W. Bottom outlet of 30 mm diameter with ball valve. On 3 legs. General characteristics: Material Stainless steel Technical characteristics: Capacity 500 litros Vessel outside diameter 800 mm Vessel height + funds 1000 mm Motor characteristics: Voltage 220/380 V Power 0.37 kW Rotational speed 655 rpm

Bead Mill Manufacturer: Fryma Type: MSS-50 Year of construction: 1993 No.: M15825 Internal pressure: 2.5 bar Pressure double jacket: 2.0 bar with control cabinet Power: 45 kW Operating hours: 17 589 h very good condition as good as new grinding chamber LBH: 1600 x 1200 x 2100 mm

Bead Mill Manufacturer: Fryma Type: MSM-50 Year of construction: 1987 No.: M12671 Pressure working space: 2.5-0.2 bar Pressure double jacket: 2.0-0.2 bar Power: 45 kW with pressure gauge, with temperature gauge as good as new grinding set movable on castors Control cabinet is missing LBH: 1600 x 1000 x 2400 mm

Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter Ultrafiltration System for Air Compressor Condensate Oil/Water Separator for Compressed Air Condensate ● Treatment plant for the separation of compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water ● Intelligent control concept with programmable control for safe plant operation, incl. plain text display via text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection ● Optimized cleaning by comparing input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection  ...

Heat exchanger Manufacturer: Fryma Type: SWT-60 No.: M17783 Year of construction: 1998 Maximum throughput: 20 m³/h (water) pressure product space: 4 bar pressure double jacket: 4 bar Power: 15 kW isolated with pressure gauge with temperature gauge with manual LWH: 1600 x 900 x 1800 mm

Bead Mill Manufacturer: Fryma Type: MS-12 Year of construction: 1992 No.: M15426 Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Power: 3.0 kW with control cabinet with speed-controlled hose pump speed-controlled rotor with temperature gauge (glass broken) with pressure gauge with double-acting mechanical seal LBH: 800 x 600 x 760 mm

Hose pump Manufacturer: Bredel Hose Pumps Type: SP/15 No.: 14845 Power: 0.37 kW in EEx protection speed-controlled very good condition LWH: 750 x 450 x 350 mm

Bead Mill Manufacturer: Fryma No.: M11499 Type: MS-12 Year of construction: 1998 Power: 3.12 kW Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Internal volume: 0.5 l Throughput (water): 0.4 m³/h speed-controlled excenter screw pump with pressure gauge, with temperature gauge with control cabinet LBH: 950 x 550 x 750 mm

Colloid mill Manufacturer: Probst & Class (PUC) No.: 86086 Power: 1.1 kW with hopper with three-way valve with plug & on-off button LWH: 460 x 260 x 620 mm

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

Vacuum processing plant Manufacturer: Fryma Type: VME-6 Machine No: F17.3750 Year of construction: 1977 Pressure double jacket: 0.5 bar with integrated heating pneumatic vertical stroke Temperature gauge with vacuum pump with vessel (movable) Scraper agitator, dissolver mixer, colloid mill Mounted on a mobile frame with operating instructions Usable volume: 6 l LBH: 850 x 600 x 1350 mm Weight: approx. 150 kg

Vacuum deaerator Manufacturer: Koruma Type: ERV (nameplate missing) Motor power: 1.1 kW with two pumps, speed controlled good condition LBH: 1500 x 750 x 2100 mm

Progressing cavity pump Manufacturer: Wangen Type: KL 505S-50.4 Item #: 900,588 Year of construction: 1995 Pressure: 4-10 bar very good condition with plug & on-off button LBH: 2800 x 300 x 320 mm

Bead Mill Manufacturer: Fryma Type: MS-18 Machine No: M16500 Year of construction: 1994 Pressure grinding chamber: max. 2.5 bar Pressure double jacket: max. 2 bar Motor power: 11 kW with switchgear & documentation Grinding space in very good condition with emergency stop button with temperature meter, with pressure gauge LBH: 1100 x 780 x 1350 mm

Corundum disc mill Manufacturer: Koruma Type: T-3 Item #: 564 Year of construction: 1974 Power: 13 kW very good condition with funnel with outlet chute (coolable) with cable & plug LBH: 700 x 500 x 1350

Screen basket screw used Manufacturer: TSO Industrieanlagen Type: D 400 Year of construction: 2002 Screw diameter: approx. 400 mm Slope approx. 250 mm Thickness approx. 6 mm Screening container each: approx. 2400 x 1100 x 1100 mm Geared motor 4 kW 30 rpm Total dimensions: approx. 6000 x 1100 x 1700 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm

Colloid mill Manufacturer: Probst & Class (PUC) Type: JVM Item No.: 59201 Power: 9 kW with hopper with outlet chute with switchgear, cable & plug Rotor normally toothed, stator cross-toothed Weight: approx. 150-200 kg LBH: 600 x 430 x 960 mm

Colloid mill Manufacturer: Fryma Type: MZ-150/B Inline machine, horizontal Power: approx. 22-28 kW (type plate missing) with cross-toothed stator, normally toothed rotor installed on movable aluminium frame, on fixed castors with cable & plug Weight: approx. 350 kg LBH: 1000 x 550 x 650 mm

Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm

Colloid mill Manufacturer: Probst&Class (PUC) Type: K 150/0 Power: 13 kW with cross-toothed grinding set (good condition) with on-off button & small switchgear standing on feet with hopper (diameter: 660 mm) LBH: 660 x 650 x 1450 mm

Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year of construction: 1977 Material: Normal steel Drive motor: 55 kW Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Speed: 326 rpm Flow rate: 240 L/min operating pressure: 100 bar Operating voltage: 380/660 V Protection class: 44 Flanges: DN 65 Condition: Used Note: Frequency range: 50 Hz, Protection class: 44, Flanges: DN 65 Price: On request

Name: Netzsch Nemo pump used Manufacturer: Netzsch Type: NM031BY04S24B Year of construction: 2006 Material: Normal steel Drive motor: 3 kW operating temperature: 20 C Dimensions: L 1700 x W 300 x H 500mm Empty weight: 150 kg Speed: 79-262-719 rpm Flow rate: 0.2 - 1-3 m3/h Operating voltage: 400 / 690 V Protection class: 55 Flanges: DN 65 Condition: Used Tech. Documentation: No Price: On request

Name: Progressing cavity pump used Manufacturer: Seepex Type: BN10 Year of construction: 1999 Material: Normal steel Drive motor: 9.2 kW operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg. Speed: 75 -430 rpm Capacity: 1.5 -12 m3H operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Protection class: 55 Flanges: DN 80 / 100 Condition: Used Tech. Documentation: No Price: On request

Vollrath Perlmühle VMSM 2/8 B Ex protected version Double chamber Grinding pot 2 x 8 l Double jacket Power 18.5 kW Very good ready-to-use condition, directly from production!

Manufacturer: Grundfos Type: CME 3-5 A-R-I-E-AQQE S-A-D-N Condition: as new (short in operation) Pump speed: 3480 1/min Nominal flow rate: 3.72 m³/h Nominal head: 49.62 m Number of wheels: 5 Ambient temperature: -20 .. 55 °C operating pressure: 16 bar Location: Homburg

COMEC Pearl Mill M 8 Stainless steel Double jacket Container capacity 8 l Very good ready-to-use condition, directly from production!