milling machines wood used for sale (631)

Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel

Grecon finger jointing line, type FL 10, Year of manufacture 2010, For horizontal jointing, 10 cycles/min, With scoring motors at the top and bottom for butt joints, Infeed length 1800 – 6000 mm, Outfeed length 2000 – 13600 mm, Consisting of:, - Chain conveyor, - Tilt hoist, - Single piece feeder, - Dimter 450 cross-cut saw, - Grecon FL-10 finger-jointing line, - Oest non-contact glue application system, - Cycle press with cross-cut saw, - Outfeed with curing station, - Multi-cut saw in continuous operation, - Stacking unit, - Outfeed for wood packages

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmweight: 2 t: ja milling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Router R8, large table, ready for demonstration from the site.

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

gebr. Table milling machine ALDINGER Type: S 15 Year: 1959 Engine power: 4 / 5 hp (2.94 / 3.7 kW) Doubling the speed via selector switch Left/right rotation via selector switch 6 Speeds: 2,800 / 3,500 / 4,500 / 5,600 / 7,000 / 9,000 rpm Height adjustment by handwheel Extraction connection: 120 mm Table size: 95 x 105 cm Table height: 85 cm 525 kg Unoverhauled - ACTUAL state from carpentry dissolution FIXED PRICE

reus: 8000 min-1 U/minWeight: 5500 kgYear: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mmtravel -x axis: 1035 mmtravel -y axis: 560 mmtravel -z axis: 510 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross milling machine Wigo 1016 Working length 750mm Maximum milling height 150 mm Spindle diameter 50 mm 15kw spindle motor 3kw Hydraulic Pump Motor Pneumatic material pressure Pedal control machine dimensions 1450 x 1600 x 1800h mm

Number of knives: - z=Diameter: - mmLength: - mmShank diameter: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1.200 x 780 mmMotor output: 7,5 kWSpindle diameter: 30 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REX F-59S Built in 1988 Motor power: 6 / 8 kW (rated current: 16A) Swivel range from -10° to +45° Speeds: 3rd / 4.5 / 6th / 9,000 rpm Milling spindle: 30 + 40 mm Height and swivel adjustment by handwheel Selector switch for left/right rotation Control panel at the top (at eye level) Socket for feed rate Engine brake incl. 2 table extensions Table size: 97.5 x 88 cm Suction nozzle 2 x 120 mm Weight approx. 800 kg Transport dimensions W x D x H (approx. dimensions): W: 110 cm T: 132 cm H: 179 cm

Cross rung milling machine Make Stegherr Type KSF 2/4 with milling cutters Suitable for milling cross bar joints on e.g. windows, doors and furniture equipped with 3 milling units one upper and one lower milling unit each mill the two mitre-like recesses in unison and a third aggregate at the same time the plating The machine table is moved pneumatically-hydraulically. The forward and return speed is adjustable. With foot control 2 motors each approx. 2.2 kW Connected load approx. 4.5 kW Pressure 6 bar Voltage 380 V 50 Hz Suction nozzle diameter 180 mm

Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Dimensions (L/W/H): 560x500x580 mmWeight: 80 kgTotal power requirement: 0,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x930x1080 mmWeight: 390 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1780x850x1250 mmWeight: 1000 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x650x450 mmWeight: 40 kgTotal power requirement: 0,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x750x1150 mmWeight: 50 kgTotal power requirement: 1,05 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4850x4650x1820 mmWeight: 6500 kgTotal power requirement: 47 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4850x4380x1820 mmWeight: 5800 kgTotal power requirement: 41 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2750x1800x2200 mmWeight: 2500 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1400x16502 mmWeight: 1800 kgTotal power requirement: 8 kwControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x730x1380 mmWeight: 350 kgTotal power requirement: 1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 190 kgTotal power requirement: 2,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1240x710x1200 mmWeight: 225 kgTotal power requirement: 2,8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mmWeight: 680 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 920x760x1000 mmWeight: 250 kgTotal power requirement: 5,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1650x1600 mmWeight: 1300 kgTotal power requirement: 17,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 420x570x370 mmWeight: 12 kgTotal power requirement: 0,85 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.