milling machines wood used for sale (631)

WEINIG moulder, type Unimat 23E (blue line), Manufacture year 1998, Machine specifications:, - Planing width 230 mm, - Planing height 120 mm, - Cardan feeding, motor 4 kW, - Feed speed 6 – 36 m/min, Spindle layout:, 1. Horizontal bottom spindle, 7.5 kW, 2. Vertical spindle right, 11 kW, 3. Vertical spindle left (with no. 2), 4. Horizontal top spindle, 11 kW, 5. Horizontal top spindle, 11 kW, 6. Horizontal bottom spindle, 11 kW, - Surface table 2500 mm, - Motor brakes, - Grooved table, - Feeded table rollers, - Waxalite pump, - Spindle diameter 40 mm, - Complete with tooling and accessories

WEINIG moulder, type Profimat 22N

MIDA moulder, type P4E

Stair stringer milling machine SCHEER TW 4 + router HM 16 everything is in a very good, mint condition in terms of appearance and technology, the device has been used very little everything works perfectly You can start working with it immediately they are all machines for commercial use, no DIY store scrap Stair stringer milling machine SCHEER TW 4 this allows you to mill out steps and risers very precisely and accurately with the hand crank you can even work on curved butt surfaces, you can also use it to make millings on other panel materials, for example on worktops with hardened guide shafts on which the cross support with router is located with ball guide bushings, so the device can be moved very easily, accurately and safely with 4 screw clamps, the device can be securely clamped on the cheek or on similar workpieces the cross support has 2 stops each in the longi ...

Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen. max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 mm, Maschin ...

1. Dowel cutting and chamfering machine Löser model AA220 Used and fully functional 2. Dowel cutting and chamfering machine Löser model AA220 used, but electrically decommissioned 3. 21 set of dowel wreaths (short and long) for dowel cutting and chamfering machine AA220 for dowels with a diameter of 6 to 20 mm 4. Spare parts (shelf content)

This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine.

This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information.

This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5 LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information.

This 3-axis MORBIDELLI UNIX KBT was manufactured in 2009. It features a CNC control system, a working area of 3000 × 1000 mm, and a maximum panel thickness of 60 mm. Equipped with multiple drilling and milling units, including 24 vertical and 4 horizontal spindles, it also has a fixed saw unit and supports both manual and automatic panel handling. Consider the opportunity to buy this MORBIDELLI UNIX KBT CNC Wood Machining Centre. Contact us for more information.

This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information.

This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details.

This wood mill was manufactured in 1990. Consider the opportunity to buy this ROBLAND Tischfräse wood mill. Contact us for further details.

This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information.

This 4-axis QUICK CNC UA 481 was manufactured in 2024. It features a 2100 x 3050 x 400 mm working area, a 9 KW HSD/HSK F 63 spindle, and a double layer vacuum table with 6 zones. Equipped with a Yaskawa servo motor and two Becker pumps at 250 m3/h each, its ideal for advanced woodworking. Consider the opportunity to buy this QUICK CNC UA 481 CNC Wood Machining Centre. Contact us for more information about this machine.

This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.

This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine.

This 5-axis FORMAT4 Profit H500S 16.56 was manufactured in 2016. It features a large working area with dimensions X=5540 mm, Y=1570 mm, Z=350 mm, and is equipped with a 5-axis main spindle. The machine includes a drilling head with 12 vertical and 6 horizontal drilling spindles, a grooving saw unit, and a motor controlled via inverter up to 7,500 rpm. It also has two tool changers and a Becker vacuum pump. Contact us for more information about this machine.

Table milling machine Bäuerle Type SFM With 3 rollers feed Spindle diameter 30 mm Motor power 3/4 kW Table size 1100 mm x 900 mm Table opening maximum 400 mm Clamping length of the spindle maximum 130 mm Spindle left/right rotation Speeds adjustable via straps 2800 / 4500 / 5600 / 6000 / 9000 / 12000 rpm With table extension Weight approx. 650 kg

Table dimensions: 2.600 x 800 mmMotor output: 11 kWSpindle diameter: 30 mmreus: 3000/4500/6000/9000 U/minWeight: 780 kg: Ja : Ja : Elektrisch : Elektrisch : -5° bis +45° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: mmWorking height from to: . mm0: . mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0294 Brand: SAC Model: TS 120/C Spindle moulder with sliding carriage for milling wood, plastics, composite materials, joinery, window frames and various Technical data: Steel base with cast iron table Table dimensions mm 1100 x 700 Sliding table dimensions mm 1100 x 260 Sliding table stroke 1060 mm Table height 850 mm Shaft diameter 35 mm Max tool diameter 330 mm Vertical spindle stroke 160 mm Spindle rotation speed rpm 2900/4000/5800/8000 Motor power 4 Hp Suction mouth diameter 120 mm Overall dimensions mm 1100 x 1000 x 1200 h Weight kg 580

A CNC drilling and milling center Morbidelli is available. Travel X/Y/Z: 2600mm/800mm/55mm, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2200mm, weight: approx. 3300kg. An on-site inspection is possible. Available from May 2026.

Table dimensions X/Y: 520mm/430mm, speed: 25000rpm, milling stroke: 43mm, milling spindle diameter: 22mm, cutter diameter min./max.: 3mm/40mm, weight: approx. 60kg. On site inspection is possible.

: ja weight: 1,8 tdigital: ja Axis: 4 x-travel: 480 mm: 2500 Dimensions (L/W/H): 1600 x 1400 x 1600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This woodworking machine was manufactured in 2004. It features a robust 12 kW main spindle with a programmable speed range of 1500-24000 rpm and a tool holder HSK F63. The machine table includes 6 support arms and sets of suction plates, adjustable for various workpiece sizes. Additionally, it boasts a 100 m/min rapid traverse on the X-axis and an 18-fold tool change magazine. For more information about this woodworking machine, please reach out to us.

This 3-axis MASTERWOOD Project 315 was manufactured in 2007. A robust CNC router with a working size of approximately 120 x 280 cm, it features a 12-slot changer and a powerful vacuum pump rated at 90 m3. The computer was updated in 2023, and the axis control was renewed in 2018. If you are looking to get high-quality milling capabilities, consider the MASTERWOOD Project 315 machine we have for sale. Contact us for more information.

This 5-axis Cosmec Conquest 515 was manufactured in 2021. A robust CNC processing center featuring a fixed work table, double-sided driven traveling portal, and a continuously interpolating 5-axis milling spindle. It excels in machining solid wood, wood-based materials, and plastics. Key features include dual gantry motorization, high travel speeds, and a 5-axis spindle with liquid cooling. Ideal for high-precision tasks. Contact us for more information about this machine.

This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information.

This 3-axis SCM Record 125 N CNC Wood Machining Centre was manufactured in 2007. It features a robust 7.5 kW electrospindle reaching up to 18,000 rpm, and an automatic tool changer with 8 positions. The working area extends to 3400 x 1720 x 400 mm, supported by a vacuum pump of 90 m³/h. If you are looking to get high-quality milling capabilities, consider the SCM Record 125 N machine we have for sale. Contact us for more information.