Mills used for sale (173)

Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabine ...

Disc mill with 2 counter-rotating shafts, in stainless steel, for herbs and similar products

Lump crusher BÜHLER MBP 2015 in good condition 4 kw with 119 rpm Belt drive ø235 : 460, n= 61 rpm, cleaned, tested, test run carried out in our specialist workshop mounted on steel frame

Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In j ...

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Machines No 53423, 5.5KW incl. soundproof booth

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Used colloid mill made by Młynkol type KMH700. New 2005. Power - 11 kW. Rotation - 2900 rpm. Reported output 700-1000 kg/h. Weight - 185 kg.

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Colloid Mill Manufacturer: Fryma Type: MZ 80/A Factory No.: M13063 Power: 2.2 kW Year of construction: 1987 Working room pressure: 1 bar very good condition with double jacket with outlet chute with pressure gauge LBH: 370 x 340 x 760 mm

Manufacturer: Probst & Class (PUC) Type: N/60/S Factory number: 84.016 Power: 2.2 kW with hopper Hopper volume: approx. 20 l LWH: 460 x 330 x 900 mm

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...

Mill, Used Machine Type : B 315 Manufacturer : Alpine

Mill, Use Machine Type : B 315 U Manufacturer : Alpine Material : Mild steel

Mill, Used Machine Type : B 315 Manufacturer : Alpine

Rental Hosokawa Alpine ACM 2 system by Alpine Rentals. The Hosokawa Alpine Mikro ACM impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process coarse products up to approx. 3 Mohs´ hardness by reaching an extremely high end-product fineness values between d97 10 to 120 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles  ...

Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide wit ...

Used mill made by Bucher, type C6. No motor.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

Ball mill, Drum mill, Laboratory ball mill used HEINZ WELTE KG Type: BGAK-6E Drum: Ø 790 x 800 mm Engine 0.75 kW RPM 400 V Dimensions: approx. 1600 x 800 x 1200 mm The mill is suitable for grinding free-flowing products. All items will be checked for function before delivery, if technically possible!

Dry agent mill Manafacturer: Condux Item no.: 5988 Type: CUM 100 Year of construction: 1992 Power: 1.1 kW with hopper(diameter 330 mm, height: 400 mm) with control cabinet, cable & plug on mobile frame (castors attached) LWH: 850 x 550 x 1550 mm

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knives: 4 Rotor blades: 7 x 4

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

Perlmühle Drais PM 25 RL-V Explosion protected version Grinding tank 26 l Agitator power 24 kW with feed pump Very good condition, straight from production!

Perlmühle Drais PM 1 RL-V Explosion protected version Grinding tank 1.3 l Agitator power 2.5 kW with feed pump Revision in 2005 Very good condition, straight from production!

Rental unit, not for sale. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in Pharma design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for R&D and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and ...

Laboratory mill: Coarse grist mill MIAG from HINZ, Braunschweig Adjustable conical grinder ø 60 mm Drive 0,22kW - 1300 1/min, hinged for quick cleaning, with outlet tank Very solid, older model, can be used immediately

Molteni Pearl Mill MS.15 Explosion protected version Grinding tank 15 l Double jacket Power 17,5 kW Very good operational condition, directly from production!

Bead Mill Manufacturer: Fryma Type: MSS-50 Year of construction: 1993 No.: M15825 Internal pressure: 2.5 bar Pressure double jacket: 2.0 bar with control cabinet Power: 45 kW Operating hours: 17 589 h very good condition as good as new grinding chamber LBH: 1600 x 1200 x 2100 mm

Bead Mill Manufacturer: Fryma Type: MSM-50 Year of construction: 1987 No.: M12671 Pressure working space: 2.5-0.2 bar Pressure double jacket: 2.0-0.2 bar Power: 45 kW with pressure gauge, with temperature gauge as good as new grinding set movable on castors Control cabinet is missing LBH: 1600 x 1000 x 2400 mm

Bead Mill Manufacturer: Fryma Type: MS-12 Year of construction: 1992 No.: M15426 Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Power: 3.0 kW with control cabinet with speed-controlled hose pump speed-controlled rotor with temperature gauge (glass broken) with pressure gauge with double-acting mechanical seal LBH: 800 x 600 x 760 mm

Bead Mill Manufacturer: Fryma No.: M11499 Type: MS-12 Year of construction: 1998 Power: 3.12 kW Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Internal volume: 0.5 l Throughput (water): 0.4 m³/h speed-controlled excenter screw pump with pressure gauge, with temperature gauge with control cabinet LBH: 950 x 550 x 750 mm

Colloid mill Manufacturer: Probst & Class (PUC) No.: 86086 Power: 1.1 kW with hopper with three-way valve with plug & on-off button LWH: 460 x 260 x 620 mm

Bead Mill Manufacturer: Fryma Type: MS-18 Machine No: M16500 Year of construction: 1994 Pressure grinding chamber: max. 2.5 bar Pressure double jacket: max. 2 bar Motor power: 11 kW with switchgear & documentation Grinding space in very good condition with emergency stop button with temperature meter, with pressure gauge LBH: 1100 x 780 x 1350 mm

Corundum disc mill Manufacturer: Koruma Type: T-3 Item #: 564 Year of construction: 1974 Power: 13 kW very good condition with funnel with outlet chute (coolable) with cable & plug LBH: 700 x 500 x 1350