Mills used for sale (170)

Peforated disc mill Manufacturer: Fryma Type: ML 180 No.: M10451 Power: 7.5 kW with hopper (volume: ca. 100 l) with feed screw (speed-controlled) on mobile cart with control cabinet LWH: 800 x 700 x 2400 mm Weight: ca. 250 kg

Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg

Used hammer mill made by Alpine, type B 630. Manufacturer's documentation.

Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645

Drive: 1.1 KW weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -> fast-running fan mill. 2 identical Mills available.

Dimensions: L 620 mm x W 330 mm x H 1520 mm Drive: 2,2 KW Speed: 18000 RPM Grinding Chamber diameter: 130 mm Width: 40 mm medium air flow rate: about 2-4 m ³/min. Capacity: from 1 to 50 kg / h-> depending on the material and desired fineness.

Material: mild steel Drive: 45 KW Weight: 2000 kg Dimensions: 1500 x 1500 x 1600 mm

Drive: 30 KW

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.

Universal mill for the grinding. Drive: 75 KW / 2966 UPM; 5 identical machines on stock!

Used ball mill made by turkish company Remas. Capacity 34,000 liters. Mill inside the rubber, silicon spheres, 90kW engine. 10.68 mill Oroty rev. / Min. Dimensions: 3120mm diameter. length of 5380mm. Dost. 7 pcs.

Used colloid mill with capacity hopper approx. 30 liters. Stainless steel construction.

Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg

No.: 12690 Year of construction: 1987 top condition Head with jacket Hopper and discharge chute Power: 2.2 kW Off switch available Dimensions: LBM = 300x400x770mm Weight: approx. 45 kg

Material: steel Engine: 75 kW Pin-disk Capasity factor: F=ca. 6,3 Drive: 75 kw Speed: 4900 The machine is as good as new. You can also get the entire system with all components.

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...