other food machines used for sale (871)

in stainless steel sliders, t-pieces, flanges, etc. Price piece: from EUR 80,00 Pipes available approx. 800m Price /m: from 40,00 by DN 50 - DN 120 various steam control valves Price piece: from EUR 180,00

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 20,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 6,840 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you c ...

Make: KSB Model: KRR-EX-200-500 Capacity: 90m3/hr Built: 2001 Pump height: 25m Engine power: 30KW DN 200 The pump is designed for water and sludge and has an open impeller!

Make: KSB Model: Krr-EX-200-500 Capacity: 90m3/hr Built: 2000 Pump height: 19m DN 200 The pump is designed for water or sludge, with open impeller! Originally, a 30KW engine was installed.

This machine was designed and manufactured in our house. It is made entirely of stainless steel Can unstack bucket with, as well as without handle the power is 450 pieces per hour, each bucket size can be used. We remanufacture for them according to their wishes and ideas.

It is a lid laying station , designed and manufactured in our house. This machine puts lids on previously filled buckets and presses them firmly. This unit consists of an up-and-down station and a boom, this machine can be used universally and is manufactured according to your wishes and ideas. (the system is new)

This is a lid laying machine made entirely of stainless steel, designed and manufactured by us. It places lids on previously filled buckets, which are then also firmly pressed. The lids are disinfected beforehand, This machine it can be used variably and is manufactured according to your ideas and wishes. (The system is new)

Alfa Laval BRPX 413 XGD-14 tools Used hydraulic capacity 18,000 l/h motor 30kW Centrifuge for food purposes / fat Very good condition

- Optical Sorting Technology: Uses an advanced inspection system with high-resolution cameras, often enhanced by LED or IR lights, to detect defects and foreign materials within and outside the visible spectrum. 2 Chute configuration that allows high processing capacity and, in some cases, product rearrangement to maximize efficiency. - InGaAs technology: InGaAs (indium gallium arsenide) technology, based on infrared, improves the visibility of defects that have the same color as the good product. - Pneumatic Ejectors: Uses high-speed, high-precision ejectors to remove defective materials with compressed air jets, minimizing good product waste. - Intuitive Operating Software: Operated via a graphical touchscreen user interface (GUI) that makes it easy to control the process and adjust sensitivity settings. - Versatility: It is a flexible solution that can be configured for a wide ra ...

Automatic cereal humidification equipment Fully overhauled, tested and painted

Stock# U2441-1 Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs.

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Alfa Laval BRPX 313 SFD-34C Tools control panel

De-stoner Buhler MTSB150, overhauled, T12 / 14 hour,

Buhler MTMA 15.100 separator, overhauled

Buhler separator MTMA 15.100 D, double, flow rate T100 / hour Silos

Plansichter Buhler model Mpad 6.14, 6 working channels with 14 frames each, drive shaft with motor

340x60x95 Auction-ID: A3-43528-11925

Auction-ID: A3-43528-20943

Auction-ID: A3-43528-20941

+-18m length width 50cm Working condition Everything is there Auction-ID: A3-43528-11921

Series No.: 29917044, max. load capacity 250 kg, with vacuum pump Fezer VT 48, built in 2011, 6 adjustable suction buttons diameter 160 mm Auction-ID: A1-46666-412

Gripping ring with clamping arms Chain pendant with shackle Auction-ID: A1-46686-1081

Series No.: 031304, max. load capacity 20 kg, with vacuum pump, 4 suction buttons diameter 120 mm Auction-ID: A1-46666-514

Auction-ID: A3-43528-20942

Auction-ID: A1-46529-3110

Auction-ID: A1-46607-26

The conveyor belt is in used condition. Operation. Auction-ID: A3-43525-34009

According to photos, weight estimated Diameter 1400mm Auction-ID: A1-45666-37

Auction-ID: A1-46315-86