14899 offers

Type of machinery
Manufacturer
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Type of machinery
(Quantity: > 29)

Type of machinery
(Quantity: > 4)

Fan 12

 

Manufacturer:
(Category: 1300)

ABB 25
ABR 1
ADL 2
AEG 12
AFA 3
APS 1
ARO 1
ASP 1
AZO 3
B+M 1
BDF 2
BHT 1
BIG 5
BIT 1
BKW 1
BMI 1
BOFA 13
BPL 1
BTB 1
BTD 1
BTS 1
BVL 1
BXL 1
CDE 1
CEM 1
CMG 1
D+L 1
DEK 2
DHM 2
DKF 1
DSM 1
DVP 2
EBS 1
EMO 1
other machines and plants
23.08.2024
approved
dealer
item-No.: 164826374

used

check
Location: Land-pl
Price: 750 PLN

We offer trolleys in various sizes 60x80 = 23 pcs 100x60 = 40 pcs 65x48 = 2 pcs 90x75 = 2 pcs 39x59 = 1 pc 83x61 = 1 pc 40x60 = 1 pc 64x64 = 1 pc TRANSPORT: 60x80 = 5 pcs 78x56 = 1 pc 60x82 = 1 pc For the furnace: 100x60 = 50 pcs 60x80 = 14 pcs FOR COOLING BREAD 1pcs - 120x40 1pc - 100x40

other machines and plants
23.08.2024
approved
dealer
item-No.: 164826371
New in: 2007

used

check
Location: Land-nl
Price: 725.000 €

Storg BvbA The Storg BvbA plant has the following scope of supply 2x demountable mesophilic digisters 1x thermophilic digester consisting of concrete. However, only the roof can be dismantled 3x Buschmann mixers incl stainless steel piping, control cabinet and frequency controllers 1x Active carbonfilters 1x Guascor HGM560 (1,300kWe) 1x Waukesha APG1000 (1,000kWe) 1x Cummins Diesel (1,000kWe) 1x Gas pretreatment line + gas analyses stations 2x Transmorfators (1250KVa + 2500KVa) 4x Emergency coolers 2x Hygienysation line (15.000L Incl mixers and HEX inside tanks 1x Scales 1x Hydro unit 1x Stainless steel mixing tank 10,000L incl mixers 3x Silo (150T) 1x Command block compressed air system + Spare parts Walking floors, piping, grinders, gas analyzer, Vogelsang pumps, flowmeters, shredders, HDPE Urea tank, waterlocks and control boxes, screws are included in this price  ...

other machines and plants
20.08.2024
approved
dealer
item-No.: 164804834
New in: 1995

used

check
Location: Land-ch
Price: 3.250 €

Extraction table Italmarmi Meccanica AIR 3 (Ref. No. 523-2718) Specifications: Stainless Steel / Inox Removable table extension 1,000 x 600 mm 2 side work rails 4 230 V sockets Dimensions: LxWxH 3,500 x 1,580 x 2,450 mm Support surface table 2,000 x 950 mm Year of Make: 1995 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

other machines and plants
19.08.2024
approved
dealer
item-No.: 164797408

used

check
Location: Land-de
Price: 2.015 €

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

other machines and plants
19.08.2024
approved
dealer
item-No.: 164797407

used

check
Location: Land-de
Price: 2.090 €

Ankom XT10 Fat Extractor + RD Dryer Fat Extractor ANKOM XT10 for Crude Fat Determination The closed system with FilterBag technology shortens extraction times Sample Weighing: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction up to 15 samples simultaneously Semi-automatic system, Unattended process flow> 90% solvent recovery, Manual addition of solvent More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

other machines and plants
14.08.2024
approved
dealer
item-No.: 164764153

used

check
Location: Land-pl

THE LINE IS FOR SALE ONLY AS A WHOLE PIECE. THE BANK THAT OWNS THE LINE DOESN'T AGREE TO SELL THE MACHINES INDIVIDUALLY! Apple juice and concentrate production line consisting of: 1). 3-stage evaporation station made by APV. The station is equipped with an aroma trap. Max. capacity 12.000 l / h of evaporation on the juice. 2). Ultrafiltration station made by APV, PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10.000 l / h. Temperature 50 C. Pressure 5.5 Bar. 24 KW motor. 19 membranes dia. 12.5mm 3). Piston press made by Zamet, capacity 5.000 l / h. 2 pieces available. 4). Belt press made by AMOS, model Apex 1600. New 1997.

other machines and plants
12.08.2024
approved
dealer
item-No.: 164751076
New in: 2012

used

check
Location: Land-cz

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727117

new

check
Location: Land-ch
Price: 425 €

ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727115

new

check
Location: Land-ch
Price: 2.650 €

ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727109

new

check
Location: Land-ch
Price: 980 €

D+L Welding Inverter AC DC TIG 200 P AC/DC, TIG-TIG 200 A 230 V Weight approx. 25 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727107

new

check
Location: Land-ch
Price: 2.450 €

Electric stair climber Payload 200 kg Work safely and effortlessly Suitable for step heights up to 210 mm Robust aluminium housing foldable / fold-out incl. charger one battery charge is sufficient for approx. 1600 steps suitable for indoor and outdoor use Weight incl. batteries approx. 30 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727106

new

check
Location: Land-ch
Price: 550 €

PROMAC Combination Belt Sander 322BE1 Motor 0.7 kW, 400 Volt Grinding wheel 200 x 25 x 20 mm Speed 2850 rpm Buffing disc Abrasive belt 100 x 1000 mm Belt speed 16 m/sec. Grinding surface 105 x 250 mm Dimensions 500 x 280 x 630 mm Weight approx. 28 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727102

new

check
Location: Land-ch
Price: 2.100 €

MITROPOWER Diesel Generator PM 7500 TD Max. power 6.5 kVA Diesel engine 500 cc, 4-stroke, 1-cyl., direct injection Mains voltage 230 V Fuel tank capacity 14.5 L Electr. Constant voltage regulation Dimensions (LxWxH) 955 x 525 x 680 mm Weight 170 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727100

new

check
Location: Land-ch
Price: 7.200 €

MITROPOWER Diesel Generator PM13TA1-3 Rated power 11 kVA Max. power 12 kVA Mains voltage 400/230 V Rated current 15.8 A / 27.6 A Fuel tank capacity 25 L Water-cooled Noise level 72 dB (A) Weight approx. 331 kg LxWxH 1240x700x950 mm

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727096

new

check
Location: Land-ch
Price: 7.950 €

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727095

used

check
Location: Land-ch
Price: 7.200 €

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727083

used

check
Location: Land-ch
Price: 1.500 €

MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727079

new

check
Location: Land-ch
Price: 550 €

MACC Iron Bender "Piegaferri" Steel construction with hardened jaws 100 x 7 mm Vise with eccentric clamping Footprint 330 x 330 x 300 mm Weight approx. 35 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727078

new

check
Location: Land-ch
Price: 1.200 €

MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727076

new

check
Location: Land-ch
Price: 2.950 €

MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727075

new

check
Location: Land-ch
Price: 1.400 €

MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727074

new

check
Location: Land-ch
Price: 2.700 €

MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727071

new

check
Location: Land-ch
Price: 720 €

MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727065

new

check
Location: Land-ch
Price: 520 €

JET Thickness Planer JWP-12 Max. planing width 318 mm Thickness Clearance 6-153 mm Power 230 V, 1.8 kW Dimensions LxWxH 70 x 60 x 50 cm Weight approx. 33 kg WE share possible !

other machines and plants
09.08.2024
approved
dealer
item-No.: 164727064

used

check
Location: Land-ch
Price: 820 €

Trowalization system 2-fold Connection 400V (Opening see sketch)

other machines and plants
02.08.2024
approved
dealer
item-No.: 164666955

used

check
Location: Land-de
Price: 1.300 €

Motor 5.5 kW/380 V/50 Hz, 2920 rpm, pipe connection D=250 mm

other machines and plants
26.07.2024
approved
dealer
item-No.: 164618795

used

check
Location: Land-nl

rand Zwick/Roell Type Material testing machine Chassis number FS3396 Length mm 1200 Width mm 700 Height mm: 2000 Transport dimensions L x W x H 2.5 x 1.2 x 2.0 Control type Manually operated Documentation No Instructions No Electrical diagram No Photos/film available: To follow

other machines and plants
26.07.2024
approved
dealer
item-No.: 164618753
New in: 1992

used

check
Location: Land-nl

Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992

other machines and plants
26.07.2024
approved
dealer
item-No.: 164618752
New in: 1997

used

check
Location: Land-nl

Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 155098 Construction year 1997 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Number of brushes n/a Number of spindles n/a Condition machine working Control type B&R Electric connection 3x400V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos

other machines and plants
26.07.2024
approved
dealer
item-No.: 164618750
New in: 1996

used

check
Location: Land-nl

Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 102.36.99.48.0596 Construction year 1996 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Condition machine working Control type B&R Electric connection 3x380V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996