other machines and plants used for sale (15,054)

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net

Electric motor AEG IEC 225M IMB 5 Year of construction 1996 Type AM 225 MC 404 52kW Price net 250

Electric motor AEG IP 54 Year of construction 1991 Type AM180LC 22kW Price 250,00€ net

LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...

RS Simulators Here we offer a test cabinet. Water-cooled Temperature range: -40°C to +180°C Test room dimensions: 850mm x 850mm x 800 mm (WxHxD) External dimensions: 1100mm x 1850mm x 1500mm (WxHxD) Current consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Type: TS 600/45 Explosion-proof operation not tested but Max 160°C in this Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

White Temperature Chamber Here we offer a white temperature chamber. White temperature chamber water-cooled Temperature range: from - 70°C to 180°C Temperature change rate cooling 10 K/min Temperature change rate heating 10.0 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ± 2.0 K Test room dimensions: width 580 mm x depth 615 mm x height 750 mm Housing dimensions: width 895 mm x depth 2080 mm x height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW Rated current 26 A Refrigerant: R-404A R-23 Weight: approx. 450 kg Control panel has been updated to a 24 volt version Type: WT11-270/70/10 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with le ...

Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

The CD160 series of our high-pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel, which ensures long durability and corrosion resistance. For the beautiful look, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, with lifting eyelets. The machine has a galvanized roof plate with a side bracket for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 ...

The CD100 series of water and water jet machines ranges from 250 to 2050 bar with pump flows from 21 to 167 l/min. The pump is powered by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel to ensure long service life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are equipped with rubber feet under all four corners and the machine has forklift pockets as well as hanging eyelets at all four corners. The machines have galvanized roof panels with side railings for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1 ...

The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...

The machines of the CD25 series are compact high-pressure cleaners from 170 to 500 bar and a volume flow of 17 to 42 l/min. The pump is powered by a 3-cylinder, water-cooled Kubota diesel engine. The sturdy frame is made of stainless steel for long durability and corrosion resistance. The powder coating ensures the very beautiful appearance. The machine has very compact dimensions of 1200mm x 800mm. This corresponds to the same size as the well-known EURO pallet. The frame is fixed on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eyelet. This allows for very easy transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500  ...

The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...

The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

The CE125 series is an electrically driven high-pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.

The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.

The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...

The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min.  ...

The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

BUHLER impacts dehulling machines suitable for oats, sunflower, spelt, soya and some others.. Almost not used since it was in a store Very nice conception , 18 cm impact ring hence hight output till 3 tonnes per hour according to Handbook manufacturer with an integrated diaphram to set the material flow input With an integrated device to set the speed by hand ... but also be set with speed electronical variator Many other Buhler machines available for dehulling lines : scourer MHXF, paddy table enquiries welcome Shipping to any destination possible

Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year of construction 01/08) - Motor: Electric 30kW - 1250l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs and crane eyelets - Dimensions with 1250l water tank: approx. 1,100 x 1,760 x 1,770 - Empty weight: approx. 1,500 kg - Year of construction: 2013 - Operating hours: approx. 1500 h

Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year of construction 12/16) - Motor: Electric 30kW - 400l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs - Dimensions with 400l water tank: approx. 1,250 x 1,510 x 1,260 - Empty weight: approx. 700 kg - Year of construction: 2009, new high-pressure pump12/2016 - Operating hours: approx. 1500 h

Steel hall, steel construction, trapezoidal sheet clad used Manufacturer: unknown Dimensions approx. 28 x 10 x 23 m The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

The container can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, rain retention tank, retention tank, retention tank, rainwater retention, rain storage tank, retention ecister, cistern, etc. Dimensions: D = 2.50 m - L = approx. 8.70 m The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line  ...

centre height: unbkt. mmtotal power requirement: unbkt kWweight of the machine ca.: unbkt. tdimensions of the machine ca.: unbkt. mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.