other machines and plants used for sale (16,326)

Hydraulic PumpBUCHER I ZP6N1-250/6H2-100R ( IZP6N1-250 / 6H2-100R )-100 / 200 barn 1450 rpm250 / 100 l/minshaft: Ø 38 mmDimension: 580 x 270 x 210 mm

Dual Hydraulic Pump, Hydraulic PumpORSTA4/20.0-260+4/20.2-230 ( 4/20.0-260+4/20.2-230 )TGL 37069Flange: 112 x 110 mmNew !Dimensions: 250 x 105 x 115 mm

Pneumatic Cylinder, Round CylinderEBERLE ENGINEERINGD-32182-A-12stroke: 305 mmRod diameter: Ø 11 mmhead and base: aluminumcylinder tube: stainless steelNew !Dimensions: 30 x 30 x 520 mm

Optotrap - Rotating Beam Light Curtain SICK - OTD 3 - 1312 S01 Range 7 meters Connection 12 Volt Dimensions 280 x 180 x 320 mm Weight approx. 3.5 kg Devices are tested 5 units in stock -Unit price-

Test bench for power up to 2.2 KW Speed control Speed Switching Handheld remote control with cable for speed and rotation direction switching Data for converters see nameplate Connection cable CEE 32A Output CEE 16A Space requirement W - 600 x D - 650 x H - 1,750 mm rollable Weight approx. 85 kg

500L EMULSIFYING MACHINE 1. Capacity: 500KG/batch 2. Agitator: 5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 110 RPM. 3. Tank: Full capacity 640L, Mixing capacity 150 to 500L, SUS 304 heater 6kx4 unit. Max product heating temp 950C 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed 1500L/Hr 2 bar. 1000L EMULSIFYING MACHINE 1. Capacity: 1,000KG/batch 2. Agitator: 7.5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 120 RPM. 3. Tank: Full capacity 1300L, Mixing capacity 300 to 1,000L, 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed3000L/Hr 2 bar. 5. Material machine: Contact Part (inside tank) SUS 316, others SUS 304 6. Thickness: ≥3mm

Zellschneider photovoltaic solar cells. 5000 whole cells from the front per hour. 10000 half cells from behind per hour

Payload 10,000 kg Rope diameter 22 mm x 150 meters length as specified in the documentation Operating pressure 55 bar to max. 80 bar Flow rate 19 litres / min to max. 272 litres / min Rexroth hydraulic motor Hydraulic control block with mounting base Documentation and test book available The winch was used on a test bench / test tower. Space requirement L - 2,100 x D - 1,400 x H - 1,300 mm complete with control block Weight approx. 1,500 kg

to move the heaviest loads Total thrust 400 to - 4 x 100 to Cylinder stroke approx. 1,000 mm Double-acting hollow piston cylinders Tie rods 9 x 6,000 mm, 1 x 5,000 mm Operating pressure up to 400 bar Tank capacity approx. 500 litres Operation via wired remote control Electrical values 400 V / 2 x 30 KW

Agilent Technologies Bravo G5522A NGS Workstation 1.1 NGS Benchtop Integrated WorkStation -Integration of plate management and liquid handling devices into a benchtop automation system. - VWorks Benchtop License: Included - VWorks Simulation License: Included Robot Disable Hub: included 1.2 Bravo Liquid Handler integrated to BenchCel with - 5 Standard Pads 2 CPAC Ultraflat heated/cooled Pad 1 Bravo Orbital Shaker - 1 Bravo Thermal Pad · Magnetic Bead Pad - PCR Plate Support 96 Well · CPAC PCR Plate Insert -Deck risers for Bravo -Thermocube Chiller 400W for Bravo Thermal Pad -Controller for CPAC Pad 1.3 Bravo Gripper Upgrade 1.4 96LT Disposable Tip Head 1.5 BenchCel 4Racks Microplate Handler - With 4 Front Loading Racks - BenchCel Risers 1.6 Labware MiniHub - Integrated with BenchCel Find more here - / Contact us at -

The Sycon Thin Film Rate / Thickness Transducer is a used piece of laboratory equipment designed for measuring film deposition rates and thicknesses accurately. This transducer is vital in environments where precise and reliable film measurements are important, ensuring efficient and consistent results in laboratory settings. Manufactured by Sycon, this transducer showcases robust performance in various industrial and research applications. It is engineered for ease of integration within existing systems and provides high-precision data crucial for maintaining quality in film applications. While specific technical specifications are not provided, the design and functionality align with the demanding standards expected in laboratory equipment. ucymachines

Aerosol Jet Printer Model - AJ300CE The Optomec AJ300CE Aerosol Jet Printer, introduced around 2011, is an additive manufacturing system designed for high-resolution, non-contact printing of electronic and biological materials onto various substrates, including non-planar surfaces. It utilizes Aerosol Jet technology to deposit fine-feature patterns with feature sizes as small as 10 micrometers. Key Features: - High Precision Printing: Capable of producing feature sizes down to 10 µm, enabling the creation of intricate patterns necessary for advanced electronic components. - Versatile Material Compatibility: Supports a wide range of materials, including conductive, resistive, and dielectric inks, with viscosities ranging from 1 to 1000 cP. - Non-Contact, Conformal Printing: The non-contact deposition process allows for printing on complex, three-dimensional surfaces without damagin ...

The Pfeiffer HiCube 80 Eco is a compact, modular turbo pumping station designed for high and ultra-high vacuum applications. Introduced around 2010, it combines a turbomolecular pump with a backing pump, offering a plug-and-play solution for various vacuum processes. Key Features: - Modular Design: Allows for flexible combinations of different turbopumps and backing pumps to suit specific application requirements. - Compact and Versatile: Its compact size makes it suitable for laboratory settings and industrial applications where space is limited. - Energy Efficiency: Features an intermittent mode that adapts the pumping station to process conditions, potentially saving up to 90% energy. Specifications: - Turbopump: Equipped with a HiPace 80 turbopump, offering high performance and reliability. - Backing Pump: Typically paired with an MVP 015-2 diaphragm pump, providing effective  ...

Spectrometer SPECTROBLUE FMX36 of the company AMETEK Find more here - /

Manufacturer : Microm Model : HM 520 Condition : used Find more here - / Contact us at -

Venus Bliss is a non‐invasive lipolysis machine. It employs 4 diode laser applicators to reduce fat via lipolysis, and an (MP)2 applicator that combines Multi-Polar Radio Frequency and Pulsed Electro Magnetic Fields with advanced VariPulse™ technology to reduce cellulite around the abdomen, buttocks, and thighs for a smoother, more contoured appearance and it boosts the lymphatic circulation. Find more here - / Contact us at -

Digital Screw Gauge from Mitutoyo 400-425 mm Overgrip new in the original wooden box with test certificate

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €

I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures

The ICP-725-OES of the Agilent 700 series from Agilent Technologies delivers reliable and timely analysis results. Emission spectroscopy with inductively coupled plasma enables the simultaneous determination of major, minor and trace elements. The plasma viewed radially is vertically oriented, which makes it tolerant of complex matrices. In this way, it ensures reliable and reproducible results. A fast warm-up phase increases sample throughput and productivity. Due to its robustness, the ICP725 is ideal for applications in mining, chemical industry, salt production, wear metal analysis, petrochemical production and precious metal refining. The ICP is sold with the following accessories: • Autosampler: SPS3 (S/N: AY1103M057) with associated housing • Refrigerated mobile Minore II VS – R101-19 (S/N: SZ 1337 11) • PC and ICP-Expert II software • 2 x SPS3 probe 1.0 mm id i ...

MECHANIC SYSTEM GM6VW industrial air filtration system was built in 2014 in Poland by Mechanic System Sp. z o.o. The machine is used in air filtration from dry impurities generated during various technological processes. Thanks to the use of patron filters with a large filtration area, the machine achieves an efficiency of up to 99.999% in class M, enabling recirculation of cleaned air back to the production hall. Dust accumulated on the surface of the patron filters is cleaned automatically by pulses of compressed air during machine operation. Moreover, the vertical positioning of the filters increases their vitality and significantly reduces operating costs. The MECHANIC SYSTEM GM 6VW dust collector has a fan installed directly on the filter chamber and is offered together with a controller and existing piping. Technical specifications of the MECHANIC SYSTEM GM6VW dust extraction un ...

Qty. 1 Second-hand (PUR/PIR) sandwich panel Mfc.: PIR/PUR Firing System & Profiling Press Line – Siempelkamp GmbH Terminal System – IL Kwang Metal Built: 2016 Type for sandwich panel: Outer side – Color coated steel strip Inner side – Hard Polyurethane / Polyisocyanate Use for: Construction Panel for Wall & Roof Product size: 14.0 m x 1.22 m – L x W Thickness: 50 mm, 75 mm & 100 mm Upper & lower steel strip: 1220 x 0.45 – 0.75 mm – W x T Coil weight: 10 T

Siemens Sinumerik 840D control system, incl.: Abrasive preparation, hydraulic unit, and portal loading system for loading and unloading the machine, Technical specifications:, Center distance: 600mm, center height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External cylindrical grinding spindle:, Grinding wheel standard (Øa x w x Øi): 600 x 80 x 304.8 mm, Grinding wheel peripheral speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper bore punch point: MK 4, Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total w ...

for sale is an extraction / filter system from Aerotecnica, System is still under construction., Subject to prior sale, changes and errors!

Belt washing system Rösler C20.30/0.6/B/SOP/P/SOP,, Year of manufacture: 2016, Serial No.: 72441,, Stainless steel, for container dimensions 400 x 600 mm, consists of the following work zones:, washing 1, blow off 1, washing 2, blow-off 2, Cooling with ambient air, The workpieces pass through the washing zones of the system continuously on a chain conveyor system., The drive is via a gear motor with speed control., The surface of the workpieces is first sprayed and cleaned on all sides using nozzles., The workpiece carriers then pass through the blow-off zone, where the workpieces are blown off with filtered ambient air via special nozzles., Analogously, the workpieces pass through another washing and blow-off zone (washing 2 + blow-off 2), To ensure the cleanliness of the workpieces and the washing liquid, each washing zone is equipped with a filter system., To improve washing and dryi ...

Dimensions (L/W/H): ca. 700 x 500 x 1.080 mmcurrent intensivity: 0,73 / 0,42 Aweight: ca. 80 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell: Ventilation module GR35C-ZID.DG.CR Item number: 7515724 / 188446/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DG.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR35C-ZID.DC.CR Item number: 7515723 / 188443/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515722 / 188445/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.