We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
used
used
Speed range 48 – 1660 rpm by means of a variator Turning length between centers 700 mm. Swivel head Rohm 140 mm with inner and outer jaws. With pedestrian center and a 16 mm drill chuck with interchangeable gears for thread cutting. With automatic along and cross-slide. With thermal protection. Auction-ID: A1-48994-36
used
Equipped with emergency stop button, bottom and top extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, A protected control cabinet for automatic control of the power supply, Thermal motor protection and door lock switch. Steff type 2033 feeder, Motor 380 volt, 0.75 Kw three rubber feed rollers D = 100 mm w = 50 mm. 8 supply speeds adjustable. Auction-ID: A1-48994-49
used
Train tedder, hydraulically foldable and unfoldable Auction-ID: A1-47389-51
used
used
used
• Mercedes-Benz Sprinter ambulance (RTW) • Accident vehicle • Construction: System Strobel ambulance • Former emergency vehicle of the city of Bonn • Registration date: 21.11.2019 • Fuel: Diesel • Power: 120 kW • Displacement: 2,143 cm³ • Transmission: Automatic • Permissible total weight: 6,000 kg • Engine starts • Vehicle expressly not roadworthy • Considerable accident damage in the front area • Front fairing / bumper damaged or partially dismantled • Damage or deformation visible in the front front/cross beam area • Radiator/front area as well as various pipes and components partially exposed • Airbags triggered in the cab • Various interior and trim parts damaged or dismantled • Ambulance body and patient compartment apparently largely present • Functionality of the ambulance and special equipment not tested • A functional ...
used
Brand: GIMARYear: 2008Material: fibreglassCapacity: 600 hL (60,000 litres)Configuration: vertical cylindrical tank, flat bottom with boxDiameter: 3000 mmHeight: 9000 mmRoof: domed roof, 1 eccentric chimney at the front with stainless steel hatchFerrule: 1 taster tap, 1 tap and level strip, 1 stainless steel partial drain valve, 1 oval doorBottom: flat with box, 1 stainless steel total drain valveDescription: large capacity fibreglass tank installed in the outdoor vat, in a battery on concrete block with access walkway in the upper part. Light exterior patinated by the exhibition. Suitable for the storage of wine, musts and juices, as well as cider, agri-food and industrial applications. Disassembly: to be provided by the buyer, in addition to loadingLocation: Piolenc site (France)Loading: at the buyer's expense, not included in the priceCondition: second-hand equipment, sold as is Auctio ...
used
Has 4 wheel drive, 18hp, PTO with 4 speeds, 16 forward and 16 reverse gears. Auction-ID: A3-46157-8013
used
used
Grimme GL 34 KL 4-row potato planter – 2007 Specifications: Brand/type: Grimme GL 34 KL Year of construction: 2007 Identification number: 24401082 CE marking 4-row version Standard row spacing: approx. 75 cm Working width over 4 rows: approx. 3.00 m Storage bunker: approx. 1,200 kg 4 individual cup leg elements Suitable for seed potatoes of approx. 35–55 mm, depending on shape and grading Mechanically driven cup belts Mechanically adjustable plant spacing 4 running/drive wheels Tires: approx. 11.00/65-12 AS Dimensions indicative: approx. 3.30 × 3.20 × 2.60 m (L × W × H) Own weight indicative: approx. 1,500–1,800 kg Features: Green Seed Cups with Insert Cups Adjustable shake/guide device Markers left and right Hydraulic track wipers Ridging hoods/ridge formers Electric control box for e.g. marklights, lighting and various driving/track functions Lighting Particularities: Mac ...
used
used
used
With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left with table top extension of 500 mm per side. The total tabletop width is then 1530 mm. With automatic star triangle start switch and with motor brake. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. Both with thermal motor protection. With manual pin for spindle locking. This cutter is fully equipped for milling round work and has an extra Aigner milling cap. Equipped with a SUF pressure protection standard with different pressure rings and guides. Steff feeder ...
used
Infrared Reflow Oven THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-257
used
Exercise Bikes - ProSprinter Exercise Bike with Tablet - Quantity: 1 unit - Condition: Brand new Technical specifications - Dimensions: 109 × 56 × 107 cm - Maximum user weight: 120 kg - Adjustable seat and handlebar height - Adjustable resistance level - Bottle holder included Tablet features - Processor: MT6592, 8-core - Operating system: Android 5.1 - Memory: 16 GB - Battery: 4000 mAh - Resolution: 1280 × 800 px - Connectivity: Wi-Fi, Bluetooth - Built-in speakers - USB and headphone ports - Internet access for videos, apps, and browsing Functions - Displays time, speed, distance, and calories - Integrated multimedia and connectivity features Auction-ID: A7-50016-6
used
Screw joppeling suitable for crane 30ton and heavier weight approximately 2000 - 2500 kilos Auction-ID: A1-47389-235
used
used
equipped with: digital display, air conditioning, 2 travel speeds, 2x double-acting function on boom, S50 connection, 2-piece swing boom, Auction-ID: A1-47389-23
used
LEICA BOND RX fully automated research stainer. Make that next big breakthough with confidence. From IHC to ISH, FISH, CTC, Multiplexing and more System with LEICA Bond Rx , computer (no software, only computer) , scanner , and printer label code Auction-ID: A1-49883-81
used
Equipped with 6-cyl. \"Sizu\" diesel engine, 160 hp, PTO 540/540e/1000 rpm, 4DW hydraulic valves + 1, hydraulic brake valve, air conditioning, climate control, air suspension front axle, suspended cab, load sensing, headland management Auction-ID: A1-47389-21
used
used
Large mixed item of Bundeswehr/military and labor stocks. Auction-ID: A1-50015-76
used
used
Nissan Micra K13, 5-door small car, color Gray Metallic. First registration: 29.03.2017. Mileage: 109,770 km. Petrol engine with 1,198 cc displacement, 59 kW / 80 hp. Manual 5-speed manual transmission, front-wheel drive. 5 seats. Emission class: Euro 6. Permissible gross weight: 1,425 kg, vehicle mass: 1,035 kg. Tyres according to vehicle documents: 175/60 R15 74R. Additional wheelset with alloy wheels and Kumho Ecowing ES31 tires available. Equipped with air conditioning, radio/CD, FM/AM, AUX connection, telephone function and multifunction steering wheel. Power windows at the front and electrically adjustable exterior mirrors available. ESP/traction control and tire pressure monitoring system available. Front fog lights available. Interior with gray and black fabric seats, overall neat used condition. Body and paintwork are in a used condition according to a ...
used
used
For staples with a spine width of 12 mm and lengths from 32 to 64 mm for T-nails with a spine width of 8 mm and lengths of 32 to 64 mm. Included: Stock staples 5000 of 32 mm , 5000 of 35 mm , 5000 of 41 mm , 10,000 of 51 mm , 4000 of 57 mm , 4500 of 64 mm. Auction-ID: A1-48994-46
used