other machines and plants used for sale (16,339)

Data Erased-Neutralized, Very Minor Signs of Use Tested - no pixel errors Battery tested status Ok, very good case condition, no breaks, no scratches Processor: i5-8250U CPU 6th Gen Clock: 1.60 GHz Drive: 256 GB NVMe- SSD INTEL SSD pro RAM: 8 GB DDR4 Network Connection: RJ-45 Wi-Fi: + Camera:: built-in Keyboard: German, orig. no keyboard stickers Display size: (14\") Graphics: on board, UHD Graphics 620 1024 MB Sound: IntelSunrise Point-LP HD Audio Interfaces: e.g. LAN (RJ-45), WiFi, USB 3.0, USB 2.0, headset-in, micro-in, Bluetooth Accessories: 1x original power supply Auction-ID: A1-49308-68

Bamdura decking board 3600x143x22 mm – brown Co-extrusion decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Brown wood look finish. Auction-ID: A1-45099-2269

GUSMER hydraulic power unit, model CLA14/23, year 2023. Operating pressure: 130 bar Installed on a machine that has never been put into service Equipment included: Filter HENGSI Pressure Sensor Oil cooler by water exchanger REXROTH Distributor Pressure accumulator Temperature and oil level sensors Auction-ID: A1-49938-38

GUSMER hydraulic power unit, model CLA06/23, year 2023. Operating pressure: 28 bar Installed on a machine that has never been put into service Equipment included: Filter Pressure sensor Oil cooler by water exchanger REXROTH Distributor Pressure accumulator Temperature and oil level sensors Auction-ID: A1-49938-39

62.5 running metres, 8/6/8 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post cap ...

Type: Abies NordmannHeight: +1000 mmPackaging: C20LQuantity: 25 Auction-ID: A1-49609-20

Device neutralized, RUN Time tested, data erased and internally cleaned Processor: Intel Xeon E-2234 Clock: 3.4 GHz CPU: 1 HDD/SSD: (2x) 480 GB SSD RAM: 16 GB DDR4 2 modules SODIMM Network Connection: RJ-45 Fujitsu 12G SAS/S-ATA RAID Controller (D3216-A13) Interfaces: 2x LAN, 2x USB 3.0 (rear), 2x USB 2.0 (rear), 2x USB 3.0 (front), DVD, Serial, VGA Graphic: MGA G200e Auction-ID: A1-49308-118

The Elephant trellis made of durable FSC hardwood (75x180 cm) is ideal for supporting climbing plants. Made of tropical hardwood, it offers longevity and stability, with diagonal slats and stainless steel screws. The Elephant hardwood trellis can be attached to a wall or wall or mounted between two posts as part of the fence with corner fittings. Auction-ID: A1-45099-2202

Temperature Thermoregulators Type: Temperature control units Application: Industrial temperature regulation Temperature range: Typically between -50°C and 400°C Control accuracy: High precision, with minimal variation of approx. 0.1°C to 1°C Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-53

Quantity: 2Type: Ball-cut taxusIndicated size: 600–700 mmContainer: C35L (35 litres)Remarks: Ball-shaped taxus, presented in containers. Auction-ID: A1-49609-5

75 running metres, 6/5/6 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post caps wi ...

150 running metres, 6/5/6 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 60 pieces Number of posts: 61 pieces Total weight: 1860 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Industriestraße 1 ...

Auction-ID: A7-49715-99

Auction-ID: A7-49715-83

Quantity: 1Type: Cone-cut Taxus baccataHeight: 1500–1750 mmContainer: C150L (150 litres)Remarks: Cone-shaped Taxus baccata, presented in a container. Auction-ID: A1-49609-7

Double swing gate complete set (height: 1,200 mm) Details: Description: Double bar mat fence gate complete set (height: 1,200 mm) Details: 1.2 m x 3 m, complete set including post and handle set/fastening material Colour: Anthracite (RAL 7016) Gate: Frame 60/40 (1,200 mm high and 3,000 mm wide) Posts for concreting: 2,400 mm (80/80) Door panel: 6/5/6 Mesh size: 50mm x 200mm Number of doors: 2 Number of posts: 2 Location: 32602 Vlotho Auction-ID: A1-49918-48

Device tested tested, 50-90% orig HP toner, data erased/factory reset streak-free, clean printout, max 270,000 printed pages, device was under permanent maintenance Technical key data: Resolution: 1200x1200 dpi black and white Speed: up to 60 pages A4 Scan: up to 65 s. Various paper trays: up to 3,100 sheets RAM: 1.5 GB Connector: RJ-45 / LAN / USB 2.0 Printer languages: e.g. HP PCL 6 Interfaces: USB, LAN (RJ-45), Fax Special features: Multi function compartment, pull-out keyboard, touchscreen Auction-ID: A1-49308-35

75 running metres, 6/5/6 mm Height: 1.23 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1230 mm height and 2,500 mm length Posts for concreting: 1800 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post cap ...

Model: VP-2016 Machine Type: CNC Vertical Machining Center (likely gantry/portal style based on earlier photo) Origin: Plate suggests Asian manufacture (likely Taiwan/China OEM) Electrical Specifications Voltage (A.C.): 380 V ±10% Phase: 3-phase Frequency: 50 Hz Installed Power: 55 kVA Hydraulic & Pneumatic Hydraulic Pressure: 75 kg/cm² (~73 bar) Air Pressure: 5 kg/cm² (~5 bar) Tool clamping ATC operation Counterbalance / auxiliaries Machine Weight: ~25,000 kg (25 tons) Heavy-duty structure Likely gantry / bridge-type machining center Travels X: ~2000 mm Y: ~1600 mm Z: ~1000 mm Spindle Taper: ISO 50 Speed: 6,000 rpm Power: ~15 – 30 kW Tooling Automatic tool changer (ATC) Magazine: typically 40 tools Structure Fixed table, moving gantry or column Designed for: Molds & dies Medium-large plates Structural parts Auction-ID: A1-49922-15

With built-in PC (Intel Core i5 of the 14th generation, 512 GB SSD, 16 GB RAM). The ward round trolley also has an integrated large battery that enables cordless work. Auction-ID: A7-49715-22

\"General Description Fixed-chamber round baler with integrated bale wrapper manufactured by New Holland, model BR6090 Combi. Designed to combine bale formation, bale transfer and film wrapping in one continuous operation. Equipped with the CropCutter cutting system for silage and forage production. Technical Details Manufacturer: New Holland Model: BR6090 Combi Machine type: Round baler / bale wrapper combination Bale count: Approx. 28,000 bales PTO driven Fixed bale chamber Bale dimensions: Approx. 1,200 mm width × 1,250 mm diameter CropCutter rotor cutting system 15 knives Wide pickup with gauge wheels Net wrapping / binding system Integrated automatic bale wrapper Twin-arm film wrapping system Hydraulic bale transfer from chamber to wrapping table Tandem axle Hydraulic brakes Electronic / hydraulic controls Film-roll holders Condition Used agricultural condition with substantial p ...

RRP: Pcs. 89,00 € Auction-ID: A1-49894-37

Auction-ID: A7-49892-11

40L/min; Packing 1060x765x770mm; 5652 Auction-ID: A1-49373-702

Auction-ID: A1-47388-84

230V-50Hz; 1PH; Max 60C; 150BAR; 10.0L/min; including spray lance; Auction-ID: A1-49373-507

230V. Auction-ID: A1-49846-245

Fully automatic assembly and packaging line for the production of Hydrobox assemblies. The special system consists of extensive conveyor technology with roller and belt conveyors, separation and buffer systems, automated packaging stations, test modules as well as safety and control technology. The system was specially developed for a continuous production process and is suitable for industrial assembly, packaging and material flow applications. Technical data Manufacturer of the entire system: Dreisbach & Jungmann GmbH & Co. KG Machine name: Hydrobox production line Plant type: Assembly and packaging line Year of construction: 2023 Machine number: 060722 Mains connection: 3/N/PE, 400 V AC, 50 Hz Connected load: 18 kW Connection current: 32 A Control voltage: 24V DC Compressed air connection: 6 bar Plant components Fully automatic roller conveyor tec ...

Auction-ID: A1-49846-401

Consisting of reciprocating saw, angle grinder, circular saw, jigsaw, flexible lighting, impact wrench, and impact drill Auction-ID: A1-49846-381