We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
used
Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...
used
Tank for yogurt; capacity: 3,000 L. Auction-ID: A7-52122-31
used
Stacking crates English E-line normbox 6407 Auction-ID: A1-40422-153
used
Various types; approx. 25 packages; 1x Powerplus pneumatic sander Auction-ID: A1-51016-127
used
Stacking crates English E-line normbox 6407 Auction-ID: A1-40422-152
used
50 new high-quality sliding glass doors are up for auction Toughened safety glass. Dimensions: 1,025 × 2050 mm (W × H) Glass thickness: 8 mm ESG Standard: DIN EN 12150-1 Design: Clear glass ( without decoration ) Prepared: for handle bar Suitable sliding systems can be purchased in another auction. Auction here without handle and sliding system. Ideal for glaziers, dealers, interior fitters and resellers. Attractive opportunity to purchase a larger batch of high-quality sliding glass doors. The 50 doors are packed into two wooden boxes (box stock: 25 pieces). Auction-ID: A1-51623-13
used
used
Garage jack 4 ton ultra low, lifting height 80-465mm, unused in box Auction-ID: A1-40422-68
used
Temperature measured in the workshop: -70°C 2020 Device Auction-ID: A1-51251-36
used
Design: oil-sealed rotary vane vacuum pump of the SPEEDIVAC series, driven by V-belts and separate electric motor on a common base plate Nameplate: Edwards HIGH VACUUM PUMP, ED50, Serial No. 14817, Made in Britain by Edwards High Vacuum (Part of BOC Ltd), Crawley England Equipment: Oil tank with oil sight glass, gas ballast valve, suction nozzle with small flange, belt guard, electric motor VEM (VEB Elektromotorenwerk Grünhain) Accessories: Electric motor VEM (VEB Elektromotorenwerk Grünhain) with terminal box and connection cable, V-belt drive with belt guard, common base plate. Auction-ID: A7-52036-79
used
Stahlkaiser automatic hose reel for compressed air 15 meters auto stop function, maximum 900 PSI diameter 3/8\", connection 3/8\"With automatic reel stop, unlocked by briefly pulling the hose, swivel holder, for wall mounting, with mounting bracket. in box Auction-ID: A1-40422-172
used
Peak pumping speed: 95m³/h (50Hz) / 112m³/h (60Hz) Typical final pressure without purge gas: 1x10-2mbar (50Hz) / 9x10-3mbar (60Hz) Max. final pressure without purge gas: 3x10-2mbar (50Hz) / 1.5x10-2mbar (60Hz) Final pressure with 35SLM N2 flush: 9x10-2mbar (50Hz) / 5x10-2mbar (60Hz) Motor rated power: 1.5kW Power consumption at ultimate pressure: 1.3kW (50Hz) / 1.5kW (60Hz) Suction Flange: DN50 ISO-K/KF Exhaust flange: DN40 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement typical: 1l/min N2 flush connection available (P version) Integrated silencer SEMI S2 Weight: 243kg Mains connection according to the manufacturer either 200/208V, 230/240V, 400/415V or 460/480V, 3-phase, 50/60Hz Sticker on the device: 200 - 208 V Accessories: Power cord with twist-lock plug, clamp on the nozzle. Auction-ID: A7-52036-44
used
water pump with petrol engine, 80mm connections, capacity 60M3/hour, unused Auction-ID: A1-40422-480
used
Stacking crates, English E-line normbox 8622 Auction-ID: A1-40422-127
used
Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...
used
40 cm wide pins with grease nipple Auction-ID: A1-40422-85
used
Type: Chemical diaphragm vacuum pumping station with vacuum controller Max. pumping speed: 3.4m³/h Ultimate pressure: 1.5mbar Voltage: 207-253V, 50Hz, 3.0A Equipment: vacuum controller with rotary knob and display, separator on the suction nozzle, emission condenser on the outlet, two vacuum connections with hose fittings, carrying handle Accessories: Vacuum controller (attached), separator on suction nozzle, emission capacitor on outlet, power cord. Auction-ID: A7-52036-82
used
Modular clad building 20 x 40 m – 800 m² – aluminium frame, translucent canvas roof, steel claddingManufacturer / model: Locabri RFX 20H3 x 40, clad versionDimensions: width 20 m clear span, without intermediate column (20.04 m outside posts) x length 40 m (8 spans of 5.02 m) – floor area 800 m²Heights: approx. 3 m at the bottom of the slope (2.84 m under the top plate) – 5.48 m under the tie rod – 6.03 m at the ridge – slope approx. 17° Framework: 4-groove aluminium profiles, posts and crossbeams 210 x 110 mm, purlins 125 x 76 mm, cable bracing with tensionersRoof: Ferrari 602 Prestressed canvas, 650 g/m², translucent (daylight), fire classification M2Cladding: single-skin galvanised steel tray, light grey lacquered RAL 7042; 2 full-height clad gablesOpenings: 2 manual single-leaf sliding gates W 2.90 x H 2.75 m (top rail, no floor rail); 1 anti-panic pedestrian door W ...
used
used
Electrical data according to nameplate: 24V AC, 6A, 1000Hz, rated speed 60000min-1 Intake flange: DN100 CF (metal sealed) Pumping speed (10-5/10-3mbar) according to the manufacturer's catalogue: N2 240/240l/s, Ar 240/240l/s, He 240/230l/s, H2 160/140l/s Final pressure CF version with TRIVAC D 2.5 E: less than 1x10-10mbar Max. pre-vacuum pressure N2: 12mbar Run-up time to 95% Rated speed: 4min Pre-vacuum connection: DN16 KF Cooling water connection: 2x G1/8\" Max. power consumption ramp-up/final pressure: 150/30W Attached frequency converter TURBO. DRIVE 300 with heat sink, interfaces RS 485, SERVICE and REMOTE (X1), address selector switch ADR, LEDs STS/PWR/ERR Connections PURGE/VENT Water Cooling Block Mounted Nameplate date 09/04 Accessories: Frequency converter TURBO. DRIVE 300 with heat sink mounted on the pump housing, short connection cable converter-pump connected. Water coolin ...
used
250 kg towing capacity 4 meters length, unused Auction-ID: A1-40422-287
used
Microwave frequency: 2.45GHz Output Power: 3000W Anode Voltage Input: -5100V Anode current input: -900mA Revision: 02 Integrated directional coupler/detector Muegge MM 1002D-110AB (2450MHz) with SMA connection Assemblies according to labels: ME0118P-131AB, ME0118P-141AB High Voltage Input X10 (Harting Han, Rev. 02), Connector X3, SMA Connectors X1/X2, D-Sub Connector Operating hours/pulse counters (Kübler) Water cooling (IN/OUT connections with quick couplings) and fan M1 Coaxial Microwave Outlet with Flange, Water-Cooled (Hose Nozzles) Pneumatic cylinder with two cylinder switches (M8 cable to M12 Y-distributor) Design: Fan right, pneumatic left Accessories: Permanently mounted: MM 1002D-110AB directional coupler with SMA coaxial cable, red coolant hose with quick couplings between magnetron and waveguide, control cable to X3, pneumatic cylinder with cylinder switches and M12-Y distr ...
used
Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 39000min-1 Pumping speed N2: 320l/s (DN100 ISO-K) or 410l/s (DN160 ISO-K) Pumping speed He: 290/360l/s Pumping speed H2: 180/230l/s Compression ratio N2: 1x10E7 Ultimate pressure: 8x10E-9mbar Max. continuous suction pressure N2: 1mbar Max. Continuous Outlet Pressure N2: 2mbar Max. Throughput N2: 2000sccm Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Purge Gas Quantity: 50sccm Cooling water: less than 1l/min, 15-30°C Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Run-up time: less than 3min Pump weight: 19kg Control unit ACT 600 M: 8kg, starting power 650VA, rated power 300W, supply 100-240V 50/60Hz single-phase Accessories: Control unit ALCATEL CIT ACT 600 M, S/N 96 222, in 19\" semi-slot, pump cable with circular connectors, power cable and control/data cable. Auction-ID: A7-520 ...
used
Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...
used
Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-49
used
810-900 Lm, IP65, 4000K, unused Auction-ID: A1-40422-291
used
Series: TURBOSTREAM (single-stage turbo centrifugal blower) Product-No.: 858 79 Rev. year: 2006 Rev. status: A B Rated Voltage: 320V AC, 3-phase Rated Current: 9.0A Power consumption: 3.59kW COS φ: 0.72 Frequency: 734Hz Speed: 44040min-1 Operating Mode: S1 Degree of protection: IP23 Cooling water requirement: 110l/h Cooling water pressure: max. 6bar Cooling water connections on/off with plug-in brackets Oil sight glass (oil level MIN/MAX) Flow switch Leybold 200 73 507, 24V DC Weight: approx. 100kg Accessories: Cooling water flow monitor Leybold 200 73 507 (24V DC) with connection cable mounted on the device. Temperature sensor cable with brass screw connection, plastic hose with angle fitting on the lid and two cooling water plug brackets mounted. Auction-ID: A7-52036-92
used
Stacking crates, English E-line normbox 8422 Auction-ID: A1-40422-149
used
Auction-ID: A7-52122-100
used