We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
used
Ring-open-end wrench set 25-pcs. 6-32 mm, DIN 3113A, CV, unused Auction-ID: A1-40422-263
used
Seat height 44-52 cm Height 128 cm Rotatable 360 degrees Material Seat PU leather Max. Load 150 kg Weight 12 kg Auction-ID: A1-40422-330
used
used
1800 watts, 220 volts, 12 liters, unused Auction-ID: A1-40422-304
used
With PALFINGER loader crane PK12001 with remote control With PALFINGER roll-off tilt device Extendable underride protection for long load carriers Auction-ID: A1-52103-3
used
Garage jack 4 ton ultra low, lifting height 80-465mm, unused in box Auction-ID: A1-40422-236
used
Stacking crates English E-line normbox 8612 Auction-ID: A1-40422-142
used
Water pump with petrol engine. unused 30M3/hour Auction-ID: A1-40422-456
used
incl fork carriage with sideshift, very neat and well-running machine Auction-ID: A1-40422-395
used
Power circuit: 3x400V AC, 50/60Hz, 3x19A, 13.2kVA, mains tolerance ±10%, recommended pre-fuse 25A C-characteristic Control circuit: 24V DC, 2A, 48VA, recommended pre-fuse 6.3A C characteristic Output (nameplate): 2x 5100V anode voltage, 2x 1.6A Microwave data according to the manual: Anode voltage 2x -5100V DC, anode current 2x -900mA, frequency 2x 2450MHz, MW power 2x 3kW CW / 4.5kW pulse (max. average power per channel 3kW) 2 channels for two magnetron heads (HV connectors X3/X4, magnetron ground X5/X6) Interface: CAN bus (X10/X11, Sub-D 9) with DIP switch for CAN-ID Power connector X1 (7-pin), control voltage X7, signal connector magnetron heads X8/X9, PE connector X2 Motor circuit breaker F1, fuse control voltage F2 Cooling: Water 4l/min, 4bar, 20-25°C, connection closure coupling 87KBIW13MVX G1/4x9mm, additional 2 fans ebm-papst 4184 NXH (24V DC, 11W) Degree of protection: IP20 We ...
used
Stacking crates English E-line normbox 6407 Auction-ID: A1-40422-156
used
used
Equipped with compressed air connection; with pneumatic sander; Capacity 64 litres Auction-ID: A1-51016-70
used
foam mattress for protection during transport etc Auction-ID: A1-40422-157
used
Jacketed vat for cheese production; capacity: 300 L. For packing cottage/fresh cheese into 500 g bags; manufacturer stated only as China; capacity: 500 kg/h. Auction-ID: A7-52122-41
used
it is an Alfen Eve Single S-line, a wall-mounted charging station for electric vehicles with a maximum charging capacity of 7.4 kW Property Data Brand Alfen Model Eve Single S-line Model code NG910-60557 Article number 904460557 Serial number ACE0335833 Type Wall-mounted EV charging station Maximum charging power 7.4 kW Supply voltage 230 V Number of phases 1-phase Maximum current 32 A Frequency 50 Hz Number of charging points 1 Charging type AC charging Version For fixed charging cable RFID Authorization Yes Smart Charging Activated according to label Communication wired via UTP Back office Standalone, no back office system set up CE marking present Auction-ID: A3-46118-11410
used
Capacity: 10,000 L/h; manufacturer stated as Alfa Laval, Sweden. Auction-ID: A7-52122-13
used
Fuel tank with 12 volt pump, approx. 4 mtr hose and automatic filling nozzle, level gauge, lid, self-priming pump, unused and lockable Auction-ID: A1-40422-60
used
Segment circular saw blade from the manufacturer FORMAT for metalworking. Technical data according to the sticker:Manufacturer: FORMATDesignation: Segment circular saw bladeDiameter: 275 mmCutting width: 3.0 mmBore diameter: 40 mmNumber of teeth: 144 HZItem number: 25770007Number of pieces: 1Condition and scope of delivery according to illustrations. Auction-ID: A1-51933-55
used
Peak pumping speed: 95m³/h (50Hz) / 112m³/h (60Hz) Typical final pressure without purge gas: 1x10-2mbar (50Hz) / 9x10-3mbar (60Hz) Max. final pressure without purge gas: 3x10-2mbar (50Hz) / 1.5x10-2mbar (60Hz) Final pressure with 35SLM N2 flush: 9x10-2mbar (50Hz) / 5x10-2mbar (60Hz) Motor rated power: 1.5kW Power consumption at ultimate pressure: 1.3kW (50Hz) / 1.5kW (60Hz) Suction Flange: DN50 ISO-K/KF Exhaust flange: DN40 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement typical: 1l/min N2 flush connection available (P version) Integrated silencer SEMI S2 Weight: 243kg Mains connection according to the manufacturer either 200/208V, 230/240V, 400/415V or 460/480V, 3-phase, 50/60Hz Sticker on the device: 208 - 230 V Accessories: Power cord with twist-lock plug. Auction-ID: A7-52036-41
used
used
50 canopies will be auctioned, new and in their original packaging. The canopies have the following technical data: Colour: Anodized Grey Dimensions: 100cm x 120cm Material: aluminium/plastic Feature: UV Stable Ideal for glaziers, dealers, interior fitters and resellers. Attractive opportunity to acquire a larger batch of high-quality canopies. Auction-ID: A1-51623-4
used
Capacity: 1,500 L; part of the fermented dairy products production line. Auction-ID: A7-52122-27
used
25 new all-glass doors type Studio – ESG 8 mm with screen printed décor GTS 255. Quantity: 25 pieces Dimensions: 959 x 1,972 mm (W × H) Glass: Toughened safety glass (ESG), 8 mm Standard: DIN EN 12150-1 Door Type: Studio Design model: GTS 255 from the Glasdesign2000 design collection Decor: Modern screen-printed décor – easy to clean and stylish Storage: The doors are loosely located on an A-frame. Application: Ideal for modern living spaces, offices and commercial interiors. Sale without fittings and handles. These can be purchased in another auction. Ideal for glaziers, dealers, interior fitters and resellers. Attractive opportunity to acquire a larger item high-quality all-glass doors. Auction-ID: A1-51623-2
used
used
The pictures serve as sample illustrations. The identical product is offered in a comparable used condition. The actual product may differ from the one shown; in particular, the type and extent of the signs of use may vary. Auction-ID: A1-52168-27
used
Power circuit: 3x400V AC, 50/60Hz, 3x19A, 13.2kVA, mains tolerance ±10%, recommended pre-fuse 25A C-characteristic Control circuit: 24V DC, 2A, 48VA, recommended pre-fuse 6.3A C characteristic Output (nameplate): 2x 5100V anode voltage, 2x 1.6A Microwave data according to the manual: Anode voltage 2x -5100V DC, anode current 2x -900mA, frequency 2x 2450MHz, MW power 2x 3kW CW / 4.5kW pulse (max. average power per channel 3kW) 2 channels for two magnetron heads (HV connectors X3/X4, magnetron ground X5/X6) Interface: CAN bus (X10/X11, Sub-D 9) with DIP switch for CAN-ID Power connector X1 (7-pin), control voltage X7, signal connector magnetron heads X8/X9, PE connector X2 Motor circuit breaker F1, fuse control voltage F2 Cooling: Water 4l/min, 4bar, 20-25°C, connection closure coupling 87KBIW13MVX G1/4x9mm, additional 2 fans ebm-papst 4184 NXH (24V DC, 11W) Degree of protection: IP20 We ...
used
Capacity: 1,500 L; part of the fermented dairy products production line. Auction-ID: A7-52122-25
used
Includes 2x HP P27H G4 monitor, keyboard, and mouse. Auction-ID: A1-52087-512
used
230 volts, 20M3/hour, 3750 watts, unused Auction-ID: A1-40422-340