We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
used
used
This lot contains 24 pots of paint of 12L per pot on 1 pallet; mineral matt interior wall paint; Auction-ID: A1-51936-337
used
With damage, dent, number missing, leg broken off Auction-ID: A1-50943-495
used
used
1 set includes 8 lamps. Power cables, clamps, and safety are included. A detailed test report and the lamp hours are available upon request. Some of the screws on the sides of the yokes are missing, attached photos. Auction-ID: A1-51214-29
used
used
3x John Deere Pick-Up Hitch – 7230R, 6215R & 6000 Series Specifications: Quantity: 3 pieces Brand/Application: John Deere Type: pick-up hitch / liftable lower drawbar John Deere 7230R version: Application: John Deere 7230R Similar to John Deere pickup hitch kit RE326624 Reference Application RE326624: 7200R, 7215R, 7230R, 7260R and 7280R Reference weight complete RE326624 kit: approx. 252 kg John Deere 6215R version: Application: John Deere 6215R Version: pick-up hitch for the John Deere 6R series Hitch component reference: AL220977 Reference Application AL220977: 6175R, 6195R, 6215R, 6230R and 6250R Reference dimensions AL220977 (L × W × H): approx. 846 × 551 × 351 mm Estimated total weight of the offered whole: approx. 150–220 kg John Deere 6000 Series Version: Application: John Deere 6000 Series Farm Tractor Version: heavy pick-up hitch/drawbar construction Indicative ...
used
free span; trusses c.o.h. 5000mm; roof slope 20 degrees; 10 sets of intermediate trusses IPE240; 2 sets of IPE200 end gable trusses with wind posts; steel drawing; 3D drawing; equipped with pressure tubes; wind bracing; purlin lips between the rafters; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41461-12
used
Wide 215 Deep 200 High 200 cm Auction-ID: A1-47397-1180
used
Lot 2206 – approx. 24x galvanized HEB 180 construction beam – 4.00 m – 6,140 kg – incl. storage trestle Heavy batch of galvanized steel structural beams, mainly executed as HEB 180 profile and originating from a steel structure. Specifications: Number of HEB 180 beams: approx. 24 pieces Profile: HEB 180 Profile height: approx. 180 mm Flange width: approx. 180 mm Web thickness HEB 180: approx. 8.5 mm Flange thickness HEB 180: approx. 14 mm Theoretical tread weight: approx. 51.2 kg/m Length: approx. 4,000 mm each Theoretical weight of bare REB profile: approx. 205 kg per beam Material: Structural Steel Version: galvanized Total weight of complete lot incl. trestle: approx. 6,140 kg / 6.14 tonnes, weighed on site Features: Heavy Duty Welded Head/Mounting Plates Mounting plates with various bolt holes Various end/fastening constructions Approx. 4 narrower steel construction prof ...
used
New Steel construction 10 m x 32 m Galvanised steel Side column 5 m high The structure is made of IPE 160 Frame spacing every 4 meters. The construction includes: - side poles - roof transoms - wall braces - roof braces - gable columns - bowstrings; Not included Z-profiles for the roof/walls and fastening bolts, screws, and nuts. Space need for loading Lenght – 5,2 m Wide – 1,5 m Hight – 1 m Auction-ID: A1-51511-38
used
2022 Imants Culter 3.0 Pre-Grinder – Hydraulic Linkage – 6 Teeth – 3,000 mm – 880 kg Imants Culter 3.0 pre-harvester/combination subsoiler, equipped with hydraulic lifting device at the rear for attaching a second implement. Suitable for combination with, among other things, a power harrow, spading machine, disc harrow, roller or seeder. The six subsoiling legs are bolted mounted and equipped with interchangeable chisels and wing shears. Specifications: Brand: Imants Type: Culter 3.0 Year of construction: 2022 Serial Number: 29019 Version: subsoiler / combination subsoiler Own weight according to type plate: 880 kg Working width: approx. 3,000 mm Total machine width: approx. 2,780 mm Maximum working depth: approx. 600 mm Number of subsoiling feet/teeth: 6 Tooth Spacing: Adjustable Lifting capacity hydraulic lifting device: approx. 3,000 kg Rear linkage hitch: CAT III Maximum t ...
used
Equipped with lifting device; PTO540/540E/750; 2 double-acting hydraulic valves; Auction-ID: A1-47397-1037
used
Equipped with air conditioning, seat heating front/rear, leather upholstery, sliding/tilting roof, tow bar, steering wheel control. The car has a ratchet in the engine at 3000 rpm & abs failure. is just driving ! Auction-ID: A1-47426-1006
used
Galvanized steel trauss; top profile U 60x30; bottom profile U 60x30mm Auction-ID: A1-51511-43
used
Zerro horizontal milk cooling tank – 6,000 litres – stainless steel – 5,000 x 1,500 x 2,000 mm Specifications: Brand: Zerro Type: 6000ltr Version: horizontal milk cooling tank / milk reservoir Capacity: approx. 6,000 litres Dimensions L x W x H: approx. 5,000 x 1,500 x 2,000 mm Tank diameter: approx. 1,500 mm Material: stainless steel Features: Manhole Temperature indication Top and bottom connection Legs Horizontal thickened stripes on the outside Glossy and reflective surface on the outside Particularities: The refrigeration system is out of order. The operation, technical condition, tightness and completeness have not been checked. Sold as shown; See the photos for the execution and condition. Can be loaded; Forklift and telehandler are available. Auction-ID: A1-47397-2215
used
used
New Genuine Electrical Harness JCB 332/K8925! Auction-ID: A1-50216-77
used
Equipped with: Perkins 4-cylinder turbo diesel engine 79 kW, max. lifting capacity 2,500 kg, max. Lifting height 6.45 m, max. reach approx. 4.05 m, own weight 5,020 kg Auction-ID: A1-47397-1766
used
Imants 3 meter quick spit / rotary spading machine – PTO drive – machine with fire damage Specifications: Brand: Imants Type: not read Version: rotary spader / quick spader Working width: approx. 3,000 mm Drive: PTO and chain drive Attachment: three-point linkage Features: Rotating pointe shaft with spading knives/spade brackets Chain drive Underlying rake/crumbling roller Particularities: The machine has been in a shed that has been hit by fire. Discoloration, rust formation and fire damage are visible in various parts. Original paint is still present in several places and not all parts have melted away due to the fire. According to the specification, the machine is parked in the warehouse while working. It is expected that various parts will need to be replaced and/or repaired before the machine can be used again. The exact extent of the damage and the condition of the dri ...
used
Equipped with: 8 pieces working, 3 pieces for parts. Dmx controllable, Different gobo and color wheels. 250 W halogen lamp, 9 interchangeable colors + open, 7 rotating interchangeable gobos + open, electronic dimmer 0–100%, shutter/strobe, motorized mirror, manual focus, DMX/stand-alone/music-activated control, 220–240 V, Auction-ID: A1-47452-1750
used
steel pipes fi 51 mm, wallthikness ca 2,3 mm , lenght 6,5 meter Auction-ID: A1-51511-45
used
Kalfass Universa 5050 Automatic Film Full Wrap L-Sealer MachineProduction Capacity: 20-50 packs/minuteIncludes Apex S02 DF Packaging Machine Auction-ID: A1-51927-34
used
Galvanized steel truss; top profile C 60x20 mm; bottom profile C 60x20 mm Space need for loading Lenght – 6,3 m Wide – 1,1 m Hight – 0,4 m Auction-ID: A1-51511-51
used
Dimensions per scrap container 1230x910x650 mm Auction-ID: A1-51634-54
used
used
used
Equipped with Kennis 14,000 crane extendable up to 5 meters equipped with 2x lifting axle and 2x steering axle Auction-ID: A1-47426-254
used
Condition: good. Features: parking sensors all around, front and rear heated seats, sunroof, fold-out spoiler, cruise control, air conditioning, central locking, memory seats, keyless entry, ABS, tire pressure system, PDK automatic transmission, rear roller blind and adaptive suspension Auction-ID: A1-47426-2062