We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
used
THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-147
used
Golf hook Allimex 18 boxes with 100 pieces Auction-ID: A1-50174-96
used
8–10 granite / natural stone slabs and irregular offcuts, stored vertically in an outdoor steel stone rack. Details: Material: Granite / natural stone Quantity: Approx. 8–10 pieces Colour: Predominantly grey/black speckled granite with areas of brown/yellow natural weathering Largest pieces appear to be approximately 190–200 cm long Various widths, thicknesses and irregular shapes Mix of sawn/processed surfaces and rough split/natural surfaces Predominantly unfinished and irregular perimeter edges Substantial stone sections suitable for further cutting or processing Potential use for landscaping, masonry, steps, cladding, monuments or other stonework Auction-ID: A1-51282-77
used
Heavy-duty industrial centrifugal fan / radial blower manufactured by ARET B.W. s.r.o., Prachatice, Czech Republic, complete with Siemens electric motor, steel fan housing, inlet/outlet duct connections and power cable. Identification / specifications visible on the fan nameplate: Manufacturer: ARET B.W. s.r.o. Type: VDP 500-A-L90 Serial / identification no.: 2512321 Approx. weight: 80 kg Airflow / capacity (Q): approx. 0.16 m³/s Pressure differential: approx. 3,000 Pa Fan speed: approx. 2,900 rpm Rated power shown on fan plate: approx. 1.9 kW CE marked Separate explosion-protection / ATEX certification plate fitted Electric motor: Manufacturer: Siemens Type: 1MA7096-2BA10 3-phase asynchronous motor Rated output: 1.85 kW Supply: 230/400 V Δ/Y Frequency: 50 Hz Current: 6.8 / 3.95 A Speed: 2,860 rpm Power factor: cos φ 0.88 Mounting: IM B3 Protection class: IP55 ...
used
22 grey natural granite blocks, kerbstone sections and assorted cut stone offcuts in mixed sizes and profiles. Details: Material: Grey speckled natural granite Quantity: Large mixed lot – exact piece count not established Mixed rectangular blocks, elongated sections and irregular shaped pieces Combination of sawn/finished faces and rough split or broken surfaces Various lengths, widths and thicknesses Includes several substantial heavy granite sections Suitable for landscaping, retaining/edging work, masonry, restoration, stone fabrication or reuse as raw material Auction-ID: A1-51282-89
used
used
Water Jacket Filtration Hepa 180L up to 55°C CO2 from 0 to 20% Auction-ID: A1-51535-69
used
used
Decorative grey granite memorial stone / headstone blank featuring a carved tree and branch motif around the face and side. The central face is left largely plain, providing an area suitable for further inscription or finishing. Details: Material: Grey speckled natural granite Quantity: 1 piece Type: Carved memorial / headstone stone Height: approx. 90–95 cm Width: approx. 75–80 cm Thickness: approx. 10 cm Decorative relief carving depicting a tree trunk and branches Large flat central inscription area Irregular/rounded decorative upper profile Substantial solid-stone construction Auction-ID: A1-51282-91
used
used
Light grey natural granite slabs with darker grey mineral grain and distinctive scattered burgundy/red inclusions. The material appears to be semi-finished fabrication stock, with processed faces and predominantly rough/raw perimeter edges. Visible specifications: Material: Natural granite Colour: Light grey/grey with black-grey grain and burgundy/red mineral inclusions Quantity: Multiple slabs; approximately 3–4 pieces visible, exact quantity to be confirmed Approx. slab width: 160 cm Approx. slab height: 125 cm for the front rectangular slab; rear slab extends to approximately 130+ cm due to irregular raw edge Thickness: approximately 30 mm Finish: Textured / honed-type processed face Edges: Predominantly rough/raw, irregular quarry or broken edges Auction-ID: A1-51282-107
used
7 heavy natural stone slabs, apparently granite, stored vertically in a steel storage rack. Details: Material: Granite / natural stone Quantity: Approx. 7 slabs Colour: Predominantly grey/white speckled granite, with some brown/golden weathered surfaces Largest pieces approximately 240 cm long Approx. height of larger slab: 100 cm Mixed thicknesses and irregular dimensions Predominantly rough/sawn stone surfaces Natural/raw and irregular edges Suitable as material for further stone processing, landscaping, architectural stonework, steps, cladding, monuments or similar applications Auction-ID: A1-51282-71
used
used
used
Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-50174-34
used
used
used
9000 Pieces Underlay plates black and grey Auction-ID: A1-51516-7
used
Set of 3 Industrial Centrifugal Pump / Slurry Pump Assembly with Gearbox. One is fully refurbished and ready for use; the other two are used, but will be dismantled and loaded free of charge. Auction-ID: A1-51282-157
used
used
Part No.: 07.03.683 Cable length: 2000 mm Cable cross-section: 4 mm² Cable diameter: 5.7 mm Max. voltage: IEC 1500V Halogen-free, low smoke Connectors: male and female Lot No.: QC230408-A002 100 pieces per box Box weight: 15,835 kg Auction-ID: A1-50174-829
used
Thermo Scientific Microm CTM 6 Glass Coverslipper The. CTM 6 provides a continuous loading capability and may be operated without any interruption. No need to wait for reloading the next rack. Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or a ...
used
used
1440 Pieces Wooden Thermometer 22x5 cm Degrees and Fahrenheit 1 pallet Auction-ID: A1-51516-18
used
used
Brand: Powerdale Nexxtender Max. power - 22 kW Width - 250 mm Height - 250 mm Installation side connection design: 3-phase Number of charging points: 1 Length of the charging cable: 7 m Degree of protection (IP): IP55 Note: the manufacturer of these charging stations is faiilite, it is possible that the functionalities no longer work. The charging station works normally when standalone. Auction-ID: A1-50174-47
used
Automatic stone edge polishing / profiling line Rated power: 29.8 kW Voltage: 400 V Frequency: 50 Hz Weight: 3,000 kg Industrial automatic edge-processing and polishing machine manufactured by Marmo Meccanica, designed for continuous processing of natural and engineered stone slabs and strips. The machine is configured as a horizontal conveyor-type production line with multiple motorized processing stations. Material is transported through the machine on the integrated conveyor while the successive processing heads perform edge grinding, profiling and polishing operations. Good used industrial condition. Operational performance, tooling condition, individual spindle condition and accuracy have not been independently verified. Auction-ID: A1-51282-10
used
used
2750 pieces assortment Silicone molds Cake pans Ice cube molds Bakeware Muffin tins Lasagna molds Casserole dishes Silicone lid Auction-ID: A1-51516-2