other machines and plants used for sale (15,514)

4 Used DESMI NSL125-215C/D02 Pumps with Danfoss EM-PMI Motors (2023) We are offering four (4) high‑performance used DESMI centrifugal pumps, model NSL125‑215C/D02, each fitted with a powerful Danfoss EM‑PMI electric motor. All units were manufactured in 2023, have seen limited operational hours, and are in excellent mechanical condition—ideal for marine, industrial, and high‑flow applications. Pump Specifications (DESMI NSL125-215C/D02) Flow rate: 250 m³/h Head: 49.63 mLC RPM: 2967 Impeller Ø: 219 mm Power: 55 kW Pump No.: 524965-01-03 Production year: 2023 Certified with CE and UKCA markings Motor Specifications (Danfoss EM-PMI300-T310 Series) Voltage: 500 V Power: 55 kW Speed: Up to 4000 rpm Torque: 177 Nm Cooling: IC 71 W IP Rating: IP65 Mounting: IM3001 Weight: 125 kg Manufactured: 2023 High‑efficiency permanent magnet motor technology Con ...

ERSA HOTFLOW 2/20 reflow oven was built in 2007 in Germany by ERSA GmbH. It is a specialist machine dedicated to reflow soldering, one of the basic soldering techniques in high-volume production of electronic components. Electronic components are joined to the printed circuit board PCB by means of solder paste, which is melted at a controlled temperature. This results in extremely durable and precise connections, which is crucial in the production of modern electronic devices. ERSA HOTFLOW 2/20 sets the highest standards in lead free reflow soldering. It allows the soldering of all, even the most thermally sensitive components on printed circuit boards PCB with a maximum width of 510 mm. The workspace consists of 20 separately controlled heating zones and 3 cooling zones with precise temperature control, which provide maximum flexibility in terms of soldering profile configuration. Th ...

Cylinder 63/28/630 ORSTA TGL 10906/7 W 63 mm Shaft 40 mm. Stroke 630 mm. M22 x 1.5 thread. D hole 40 mm. Length one 85 cm 2 x M22 x 1.5 mm Pressure 165 bar All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Conditie Old Stock Version 1 inch BSP Boring in mm 200 mm Stroke in mm 500 mm Shaft 75 mm Length retracted H.o.H. in mm 1010 mm Length from H.O.H. in mm 1510 mm Pressure in bar 200 bar Strength, kilo at 200 bar 60 ton Length 110cm Width 30cm Height 30cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Laser system 50 watts, FOBA DP 50 for marking and engraving with focusshifter, focus distance from 426 mm to 669 mm, deflection unit Raylase TS10 and 163 mm lens, Windows XP with 1.4 GHz, 512 MB RAM, Termotec cooler built in 2005, used, ready for use, cleaned and tested. Warranty 3 months, excluding the pumping arrangement,

ROMACO KILIAN TABLET PRESS, MODEL S370 PRIME Medium-sized single-layer rotary tablet press. Modular and compact, for flexible tablet production. Made in Germany. Built in 2022. CHARACTERISTICS - Interchangeable die table - Tablet chute on one side - Simple and intuitive HMI control system - Connectable tablet control unit for automatic in-process control - Weight: 1.925 kg PRODUCTION - Output: 156,000 to 330,000 (depending on tablet size and pressing material) - Printing stations: 26 to 44 - Number of dies: 44; 40; 32; 26 - Tool type (EU and TSM): B; D - Die type: BBS; BB; B; D - Max. pre-compression force: 40 kN - Max. main compression force: 80; 100 kN - Max. tablet diameter: 11; 13; 16; 25 mm - Max. die fill: 16; 20 mm ENERGY CONSUMPTION - Drive power: 5.5 kW - Standard voltage, frequency: 400 V, 50/60 Hz - Compressed air: 6 bar

GT-5326 Plate Filter - Brand: CLEVER - Model No.: MSH-47-A-25/30-16-18 - Power: 2 hp (1.5 KW) - With 25 plates of 480 x 480 mm

The Dalex CGL 222 is a used MAG welding machine for industrial use, which is characterized by robustness and versatility. It offers 200 amps of power, a 400-volt connection, 2-stroke/4-stroke functions, HF ignition, and spot and interval welding functions, ideal for workshop applications.

The name mentioned is technical specifications for a C-bracket used as an accessory for Tucker stud welding systems (from Stanley Engineered Fastening). These brackets are usually used on automated welding heads or manual welding guns to generate the back pressure during the welding process. Technical Breakdown The letters and numbers describe the geometric dimensions of the C-bracket: a 150: Usually stands for the projection (depth) of the bracket of 150 mm. e 220: Refers to the opening width (internal width) between the legs of 220 mm. d 60: Usually refers to the diameter or thickness of the bracket material or the holder (60 mm). m 212115: This is the manufacturer's specific material number or article number for the unique identification of the spare part. Bossard Bossard +1 Application area These C-brackets are part of the Tucker SWS (Stud Welding System). They are mainl ...

FD84 S FOBA Laser System Year of construction 2002 Used, not tested, without pump arrangement, without PC Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected

FD84 S FOBA Laser System Year of construction 2003 Used, not tested, without pump arrangement Windows 2000 Without warranty Shipping possible Optional for an extra charge on request: with pump arrangement, tested and inspected

A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Two like-new and originally packaged small parts grippers Schunk for cobots (collaborative robots) are available. Payload: 1150g, number of fingers: 2, stroke: 20mm, max. gripping force: 230N. Machine dimensions X/Y/Z: approx. 161.2mm/125.5mm/86.4mm, weight: approx. 1380g. Documentation available. An on-site inspection is possible.

We offer new Fujitsu air conditioners, in packaging. The models are as follows – ARY30UUAN/AOY30UNBWL ARY36UUAN/AOY36UNAXT ABY30UBAG/AOY30UNBWL AUY45UUAS/AOY45UMAXT ARY25UUAN/AOY25UNANL ASY24UBBN/AOY24UNBNL They were stored in a warm warehouse. The price is negotiable.

For sale is a high-precision 3D coordinate measuring machine (as new) of the KEYENCE VL-700 / VL-770 series. The device was purchased in 11/2023, is in excellent condition and has been used exclusively in laboratory conditions. Technical Highlights & Details: • Model: KEYENCE VL-700 / VL-770 (VL-700 Series) • Year of construction: 2023 • Measurement method: Optical 3D surface detection with automatic 360° all-round measurement • Measuring principle: Projection of structured light patterns with a high-resolution CMOS camera • Capture: Complete 3D digitization of complex geometries without manual probing • Condition: Well maintained, fully functional, ready to use • Accessories: Incl. control computer, KEYENCE software package, calibration standard and original accessories ________________________________________ Pros: • Extremely easy to use ("place and  ...

A stencil screen printing machine Ekra is available. Frame dimensions X/Y: 800mm/570mm, print dimensions X/Y: 500mm/390mm, print speed: 110mm/s, positioning accuracy: +/-0.02mm, squeegee pressure: 320N, table adjustment X/Y: +/-8mm, max. print material thickness: 40mm, machine dimensions X/Y/Z: approx. 1300mm/1050mm/1350mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

Manufacturer: Matachana Model: 1006-2 Year of Manufacture: 2018 Volume (Vol. I / Vol. II): 44.5 L / 66 L Maximum pressure (PSmax): 3.0 / 3.0 bar Minimum pressure (PSmin): -1 / 0.0 bar Test pressure (PT): 5.4 / 7.2 bar Test date: 05/11/2018 Fluid group: 2 – Water / Steam Temperature range (TS min/max): 5 °C / 150 °C Find more here - / Contact us at -

Soundproofed, silent duct fan, TD2000, D315mm, S&P, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function 83 x 40 x 40cm, ca. 30kg 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Big Ass Battery Test Unit The battery storage system has a capacity of 195kWh. It is about 2 years old with very few operating hours. The whole thing comes from a development/test environment and is ideal for energy storage projects, electric vehicles Charging technology, prototyping or parts Extraction. It has just been serviced by Big Ass Battery, including protocol and is therefore immediately ready for use.

2 pieces robust moment bag clamps / bag clamps for bag and big bag filling for safe and fast attachment of a bag ( up to 50 kg ) to a bag nozzle / filling tube, diameter 290 mm, outlet 150 mm Universal Application: Feed, Food, Building Materials, Agriculture · Easy one-handed operation thanks to lever mechanism · Hammered paint grey Bag nozzle diameter 290 mm, outlet 150 mm

An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible.

Five identical industrial robots are available, number of axes: 4, reach: 3139mm, payload: 250kg, weight: 1.45t. With control system, no known defects. An on-site inspection is possible, not under power.

Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.

Falch Aqua Speed Pressure Washer 300bar, 98 °C Top condition B driving licence suitable - Manufacturer: Falch - Type: Aqua Speed 750tdh - YOC: 2010 - Working pressure: 300 bar - Volume flow: 18 l/min - Cold and hot water up to 98 °C - Operating hours: approx. 685 h Accessories: - Optional Price plus VAT Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Equipment location: 9554 St.Urban We are also happy to accept your machine in trade-in.

Hydraulic power unit in mint condition with accumulator for emergency stop operation for opening/closing 2 roller columns (smoothing unit, double trigger, etc.) unused, documents available

It is basically a Zeiss SEM with a water-cooled column (LEO S420), tungsten cathode and has the following detectors/equipment: SE Detector RE Detector EDX detector Noran System 7 from Thermo Fisher And another for work at low pressure, even for poorly conductive samples. Vacuum-resistant live camera Chamber size Inner dimensions: D152 x W112 x H141cm³ Condition cathode Well, there are still several tungsten filaments available. Vacuum system: Pfeiffer DUO65 rotary vane pump, roots pump + large, magnetically mounted Pfeiffer turbopump

Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-400mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible.

Qty. 1 Second-hand pallets rack storage system Mfc.: STAMH GROUP Type: 65 Lanes Built: TBA Dim. of pallets: 1.0 x 2.0 x 1.4 m – W x L x H Pallet Weight: 120-600 kg Gravity Roller Conveyor – Rack mounted lane for 3 PP Storage capacity: 195 pallets Total load capacity: 120 900 kg Requested space: 15.25 x 21.56 x 9.05 m – L x W x H Type of forklift truck to be used: Min. working main aisle: 4.4 m Min. reach height: 7.7 m