other machines for mechanical handling used for sale (5,458)

approx. 10,000 ltr./10 cbm stainless steel bulk container / storage container for pallets, wood chips, animal feed, fruits, grapes, etc. formerly grape receiving tub Vauchet Beguet FR, year 2000, used, large discharge gap controlled with 2x pneumatic cylinders (infinitely adjustable), approx. Dimensions: L: 6.50 m, W: 2.40 m, H: 1.75 m, height underframe: 2.50 m, weight with base: 3 to. Discharge via conveyor belt B: approx. 300 mm, conveyor belt speed infinitely adjustable via variable speed gearbox

crate tipper functional, for crates up to max 100120cm floor dimension

Crate tipper for crates up to 120 x 100 cm floor dimensions, paint damage, no motor, no pump

Technical data for the picking rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 07 pcs. Note: The advantage at a packaging table or at a Picking rack is that has all the tools needed & accessory materials used to create the product are always at hand. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts Weight / pcs.: approx. 5,50 kg The stands are pre-assembled 1,200 mm high 610 mm deep 07x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at eve ...

Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.

Weibert 2,5t Pallet trucks Industrial and commercial execution with weighing device Display Lifting capacity 2500 kg max. fork height 192mm min. fork height 77mm Fork dimensions 1150x540mm Stroke 120mm Roll diameter 180/80mm Weight 99.5kg G&HM-HUBW CRADLE

RA1851electromechanical pusherinstalled in a support frame made of aluminum profilesFunction:Push-off of the incoming material 90° to the conveying directionMake: Transnormouter dimensions of the frame: LxWxH=1.720x1.080x940 mmsuitable for infeed conveyor up to 1000 mm total widthdimensions of the push-off panel: H=600 mm, W=650 mmtotal weight: 108 kgFeatures: condition: good (used)Construction year: 2008Länge in mm: 1720Width in mm: 1080Height in mm: 940Nominal / outside width in mm: 1080Antrieb: SEW Getriebemotor mit MOVIMOTElectric data: 380-500KW: 0,055/0,55/S1Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. K ...

electro-mechanical pull installed in a mounting frame made of aluminum profiles Function: Deportation of the incoming material 90° to conveyor direction Make: Transnorm Measurement of the mounting frame: Lxwxh = 1.075 1.125 x 1 000 mm Measurement of the Abschiebepaneels: H = 600 mm, 650 mm, B = Total weight: 108 kgFeatures: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KGIhr Spezialist und Ansprechpartner für Intralogistik

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

The Posimat PB 80 is a pneumatically operated handling device. Version : with counterweight, suspended from on-site steel construction. Specifications: Load capacity: 120 kg; Hub; 1,600 mm; working range (radius) 2,600 mm; dead weight without counterweight and column: 150 kg The device was only in use for a few months.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm (connection M 10x1.25 thread) -Total length: 330 mm -Total length extended: 530 mm -Air inlet and outlet: adjustable -Number: 5 pieces available -Price: per piece -Weight: 1 kg/piece

4/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 -Price: per piece -Number: 8x available -Weight: 0.6 kg

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Recycling machine trade AGICOM- Pedergnana OG: Screw conveyor demonstration device - for the transport of granules. Construction: Metal construction with drive and transmission gear. The discharge height can be adjusted by adjusting the legs. electric motor 1.1 kW; Length 2.5 m

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

40 used pallet trolleys / pallet trolleys with slight signs of wear, metal frame: 600 x 800 mm,

Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of manufacture: unknown Condition: Used Model/Type: Strap Manufacturer: unknown total length: approx. 730 mm Total width incl. motor: approx. 760 mm Total width without motor: approx. 730 mm Belt width: approx. 600 mm Strap Type: Smooth Colour: Grey/ Blue Material: Stainless steel/ Aluminum Frame height: approx. 100 mm Drive type: Motor Includes SEW motor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to provide you with an individual offer or advise you on co ...

Tipping body Manufacturer: Bauer

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

For sale we offer a used, two-sided Optimus sorting system. It is an Optisorter, model WS 45200. The system is completely dismantled and prepared for transport. Specifications: Year of construction: 2011 Counting parameters: 3F + N + PE, Control voltage: 24 VDC, Power supply: 400 V, 25 A (max.) Product dimensions: min. 150x150x5mm, weight 0.1kg; 400x280x40mm, weight 2kg Capacity: 4500 containers per hour Total length: 38 m Width: 7 m Number of feed-in stations: 3 pcs. Number of wings: 114 pieces. Total number of discharges: 201, of which 120 on one side and 81 on the other Number of engines: 2 pcs. Machine location: 89-600 Chojnice/Poland Machine is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl

We offer a used SMC Carousel mini load of the manufacturer SSI Schaefer for sale. Specifications: Powerful modular shelving system for small goods (miniload), 68 container racks with 12 levels per carousel Container 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Approx. 3,264 memory locations The entire system (miniload, flow racks, sorting system) consists of 4 carousels Length per carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum walking speed 0.6 m/s, Machine location: 89-600 Chojnice/Poland Machine is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl

We offer a used sorter of the manufacturer PROMECH for sale. Description of the product: - 108 sorting units - internal roller conveyor with SEW motors - Emergency stop system - 1 automatic scanning system, 3 manual scanning systems Overall dimensions approx.: 44m x 11m, height 2.85m. Machine location: 89-600 Chojnice/Poland Price on request Machine has been tested and is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl

We offer a used sorter P-FTO.294 of the manufacturer EQUINOX for sale. Brand: EQUINOX Type: Compact sorter for sliding trays Year of construction: 2015 Sorting machine type P-FTO.294 Features: 38 ejects, first induction zone with two induction positions, one ejection Sorting capacity: 4000 trays per hour Dimensions for sorted items: 70/450 x 40/340 x 3/250 mm-H from 0.1 to 2 kg Sorting speed: 0.55 m/s Sorting height: Conveyor belt 14.5 m 16.8 m Dimensions of the sorting compartment: 475 x 466 mm wide Machine location: 89-600 Chojnice/Poland Price on request If you are interested, please contact us: +48601553406 or biuroregalux.pl

We offer a used sorter OS-6-2700-STS of the manufacturer EQUINOX for sale. Description of the product Manufacturer: EQUINOX Type: OS-6-2700-STS Year of construction: 2009 Serial number: P.DWA.119 Overall dimension L: 33000 mm Overall dimension W: 4200 mm Overall dimension H: 1850 mm Sorter capacity: 6000 pieces/hour Characteristics: 2 induction zones consisting of 3 induction positions and omnidirectional barcode scanning; 90 discharge stations + 4 no-read stations Output approx. 6000 pieces per hour; Format sizes for sorted items; weight 0.02-6 kg; Length 70-450 mm; width 70-300 mm; height 5-250 mm The goods must not protrude beyond the contours of the package. Machine location: 89-600 Chojnice/Poland Price on request Machine has been tested and is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406  ...

properties: Used belt conveyors curve 90° Transnorm Condition: Fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. motor 0,55Kw and side guide Feet to be ordered separately Color: Silver/ Yellow 1 pc in stock specifications: Dimensions of the belt conveyor curve 90° Type: 1600-105 Total outer width: 1,820 mm Total width inside: 750mm Total width incl., motor: 870mm Curve angle: approx. 90° degrees Belt width: 500mm Strap Type: Gripp Frame height: 220mm Material: Aluminum / Steel Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, Schraegfoerderer or telescopes for loading and unloading your goods, we are your  ...

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

weight max. in kg: 2500 kgstroke: 4,8 mmfork length: 1200 mmbattery: 80V / 205AH LI-ionweight of the machine ca.: 3,9 tdimensions of the machine ca.: 3,57 x 1,15 x 2,16 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Included in delivery: 01x End-of-line increase, new Execution: Universal Material colour: RAL. 1003 Signal yellow Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile abm.: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pcs.

Included in delivery: 01x End-of-line increase, new Execution: Universal Material colour: RAL 5010 Gentian blue Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile abm.: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pcs.

properties Used belt conveyor of the Blume Fördertechnik Color: blue Incl. drum motor Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Material: Steel Incl. 2 feet specifications: Dimensions of the belt conveyor Type: DAG80R0596-2 Total length: 3.350mm Total width incl. motor: 530mm Total width without motor: 440mm Belt width: 400mm Strap Type: Smooth Head: approx. 800mm, height-adjustable Frame height: 80mm Incl. drum motor 0,3Kw Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between product ...