other machines for mechanical handling used for sale (5,462)

Planetary gearbox, gearbox, gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, -Manufacturer: Hydropa, gearbox for hydraulic motor -Type: EM1250 FE S45CR1 -Reduction ratio: 1 : 5 -Shaft: Ø65 x 105 mm -Hole shaft: Ø 100 / 94 mm -Number: 2x gearboxes available -Price: per piece -Dimensions: Ø 400 x 500 mm -Weight: 133 kg/piece

Four lifting beams from the manufacturers Nordgreif and GKS are available. 1) Nordgreif, year of manufacture: 1999, load capacity: 8000kg, gripping width: 1000mm/3000mm, dead weight: approx. 280kg. 2) GKS, year of manufacture: 1994, load capacity: 6000kg, dead weight: approx. 220kg. 3) Nordgreif, year of manufacture: 1998, load capacity: 10000kg. 4) GKS, year of manufacture: 1994, load capacity: 6000kg. An on-site inspection is possible. Sale of individual units upon agreement.

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: on hand reel, for rope hoist multi-purpose hoist -Rope diameter: 11.5 mm -Length: 40 m -Transport dimensions: 430/300/H470 mm -Weight: 26.6 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 8 mm -Length: 20 m -Transport dimensions: Ø 360 x 80 mm -Weight: 6 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: on hand reel, for rope hoist multi-purpose hoist -Rope diameter: 12 mm -Length: 40 m -Transport dimensions: 430/300/H460 mm -Weight: 26.9 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 10 mm -Length: 10 m -Transport dimensions: 370/330/H130 mm -Weight: 3.9 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank, portable -Hydraulic pump: pressure up to 200 bar, unfortunately without type designation -Flow rate: 1.2 l/min -Motor: EP 1.1 kW / 1410 rpm -Hydraulic tank: with shut-off valve -Individual components: see photos -Dimensions: 400/220/H430 mm -Weight: 30.5 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg

Three conveyors DeLaval are available. Conveyor lengths: 5000mm/6000mm/8000mm, conveyor width: 600mm. An on-site inspection is possible.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Leibfried, pneumatic cylinder double-acting type L 81 -Art.No.: 43 881 02 0110 -Stroke: 110 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 267/80/H70 mm -Weight: 2.1 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Hoerbiger, pneumatic cylinder type PA60300-0030 AZ5050/30 -Stroke: 30 mm -Piston rod: Ø 20 mm -Hole: Ø 12 mm -Max. pressure: 10 bar -Dimensions: 245/65/H105 mm -Weight: 1.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Knorr-Bremse, pneumatic cylinder type DU-80/100 -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 315/100/H100 mm -Weight: 4.2 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-25-PPV-A -Stroke: 25 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Hole: Ø 16 mm -Max. pressure: 12 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 265/80/H130 mm -Weight: 2.4 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Rexroth, pneumatic cylinder type 521 175 001 0 -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Dimensions: 230/52/H52 mm -Weight: 1.7 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, compact cylinder, short-stroke cylinder -Manufacturer: Joyner, pneumatic cylinder type DUJ-22-60/50 -Stroke: 50 mm -Piston diameter: 60 mm -Piston rod: Ø 16 mm -Hole: Ø 16 mm -Dimensions: 245/80/H105 mm -Weight: 1.9 kg

weight max.: 1000 kgtable turning speeds: 180 - 1800 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 50 - 1500 mmvolt: 230 V / 50 Hzrange L-W-H: 950 x 220 x 344 mm Mitlaufweight: 100 kgrange L-W-H: 1270 x 310 x 344 mm AntriebFurnishing:- Consists of a drive unit and a follower unit.- Clean, fluid turning movement even in the lower speed range.- PU rollers.- The container diameter can be adjusted quickly and easily using socket pins.- Hand remote control (3 meters) to set the speed and right /Counterclockwise rotation.- foot switch.- Compact, stable structure, easy to handle.Scope of delivery:- 1 control (integrated)- 1 foot switch- 1 wired remote control- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3000 kg.table turning speeds: 120 - 1200 mm/min.roll diameter: 250 x 75 mmworkpiece diameter: 150 - 2000 mmvolt: 230 V / 50 Hzrange L-W-H: 1210 x 300 x 480 mm Mitläuferweight: 154 kgrange L-W-H: 1510 x 500 x 480 mm AntriebFurnishing:- Consists of a drive unit and a follower unit.- Clean, fluid turning movement even in the lower speed range.- PU rollers.- The container diameter can be adjusted quickly and easily using socket pins.- Hand remote control for setting the speed and clockwise- counter clockwise rotation.- foot switch.- Compact, stable structure, easy to handle.Scope of delivery:- 1 control (integrated)- 1 foot switch- 1 wired remote control- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kgtable turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervoltage: 230 V / 50 Hzweight: 56.0 kgDescription:- Device for rotating and positioning Containers and cylindrical workpieces.- Unit in solid steel construction with polyurethane-coated metal rollers.- Precise speed adjustment by Frequency converter.- Foot switch for start / stop, 4-step operation.- Switch for right / left rotation.- Rotary knob for infinitely adjustable rotation speed.- Selector switch for rapid traverse / normal operation.- Switch with indicator light for operational readiness.- HF protectedScope of delivery:- 1 drive unit with control (integrated)- 1 followerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder type DGS-25-40 -Stroke: 40 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 12 bar -Number: 5x cylinders available -Price: per piece -Dimensions: 195/35/H53 mm -Weight: 0.7 kg/piece

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: Transport rollers diameter 50 mm -Transport width: approx. 620 mm -Shaft: hexagon 11 mm -Number: 2x transport roller available -Price: per piece -Dimensions total: Ø 50 x 670 mm -Weight: 1.7 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Mecman, pneumatic cylinder, type unfortunately not recognizable -Stroke: 25 mm -Piston: Ø mm -Piston rod: Ø 25 mm -Max. pressure: 10 bar -Number: 2x cylinders available -Price: per piece -Dimensions: 240/45/H45 mm -Weight: 0.6 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, short-stroke cylinder -Manufacturer: Festo, short-stroke cylinder double-acting type ADV-32-25 -Stroke: 25 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Pressure: 0.5-8 bar -Dimensions: 80/50/H75 mm -Weight: 0.3 kg

Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: Pilz, safety relay safety switching device -Type: P1HZ 2 -Id. no.: 474580 -Number: 1x relay available -Dimensions: 110/45/H75 mm -Weight: 0.3 kg

Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: Pilz, safety relay safety switching device -Type: PNOZ X3 -Id. no.: 774310 -Number: 7x relays available -Price: per piece -Dimensions: 45/90/H120 mm -Weight: 0.4 kg/piece