post press: other used for sale (786)

Size: 1650 mmEquipments:Automatic feeder unitExtended folding and transfer sectionPress/delivery sectionConveyor-type deliveryLinear rail-based manual adjustment elementsTop control panel / operator panelSafety equipment (protective guards, emergency stop, etc.)Gluing line (glue application infrastructure available)5 glue gun nozzles for 3/4-point gluing, or alternatively for longitudinal seamgluingCold glue (PVA)Valkomelton gluing systemGlue Station / 4-Point – 4 GP, 1999Breaker: Jagenberg, 1999, Separator / BreakerMosca RO MP2, 2000, Bundler

Mueller Martini Ventura MC 160 - sewing machine year 2016 max. speed 9,600 signatures/h Signatures: length min. 120 mm length max. 425 mm width min. 75 mm width max. 320 mm thickness max. 4 mm Servo Drives Touch Screen Commander control max. 11 stitches Opening 2+2 Venturi jets Belt Delivery 3215.8225 signatures control by ASIR 3 3215.8045 leaf chain for thin signatures 3215.8043 device for thread melting

Size: 2000 x 950 mmEquipments:Electric Modular DryerForced Hot Air Systemdimension 3800 x 1250 x 2170 mmPOWER 15 kW 27 Aweight 650 KG

Size: 300 x 450 mmEquipments:max. screen frame size 500 x 750 mmtable height 945 + 30 mmscreen lift height 300 mmmax. printing speed 100 - 500 mm/sec.max. cycling speed 800 p/hmains supply 220, 50/60 V / Hzworking pressure 5 - 7 bardimensions (LxWxH) 920 x 750 x 1710 mmweight approx. 245 kg

Size: 530 mmEquipments:Coate with IR and UV dryers21 Inch max. width sheeroller flood coater with aniloxspare applicating rollers included

HORIZON GMS 7 -Automatic book spine taping machine Year 1996 -Length of Spine: Manual Feed (80 mm -3.1″ to No Max. Limit) or Automatic Feed (180 mm- 7.1″ to 320 mm -12.5″) -Book Width: Manual Feed (60 mm- 2.4″ to No Max. Limit) or Automatic Feed (128 mm- 5″ to 273 mm- 10.7″) -Taping Thickness: Manual Feed (2 mm- 0.1″ to 30 mm -1.2″) or Automatic Feed (5 mm- 0.2″ to 15 mm- 0.6″) -Taping Speed: 4,000 books/hr. (180 mm/7.1″ long) -Tape Type: Water-moistened adhesive tape -Voltage/Frequency: 100V 50/60Hz, 115-120V 60Hz, 230V 50Hz -Dimensions (W x D x H): 72.1″ x 21.7″ x 36.7″ -Machine Weight: 140 kg (242 lb) -Available immediately in our stock

S. No.: 3011747 Equipment / Additional information: Volt: 230 // Hz: 50 WITH PEDAL Condition: doesn’t work properly, needs service

M. No.: 3704 Equipment / Additional information: Volt: 220 // Hz: 50 WITH PEDAL

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

Size: 500 x 350 mmEquipments:Accumulate & Folder ACF-30 (serial 381007)Stacker ST-40 (serial 409107)4x Collator VAC-600HaThree knife trimmer HTS-30S (serial 632003)Saddle stitcher SPF-30S (serial 632003)

Size: 760 x 1.060 mmImpression: 8 Mio.Equipments:Bogenformat min.: 300 x 350 mmBogenformat max.: 760 x 1.060 mmMaximum machine speed: 8,000 Bg/hMaximum punching pressure: 2.6 MN / 260 tMaterials and stacking height (including pallet)Paper min.: 90 g/qm2Cardboard / solid cardboard max.: 2,000 g/m2Corrugated cardboard max.: 4.0 mmHeight of investor stacks:Without non-stop max.: 1,500 mmMaximum continuous operation: 1,200 mmMaximum weight of stack of feeders: 1,500 kgWithout a utility separation stationWithout MasterSet

- Banding machine - desk model

NM 414 Grooving Machine Heavy-duty grooving machine for manual operation, designed for grooving cardboard from 0.6 to 4 mm using the compression-bending principle. Coupling-free drive controlled by a frequency converter Built-in piece counter Thanks to an innovative drive concept, grooving is performed in a single stroke Working width: 440 mm Groove width adjustable from 4–12 mm Front work table 45 cm long with 2 scaled T-slots and 2 guide rails Rear work table with belt discharge Grooving on the top or bottom side depending on the tool’s mounting position Power rating: 1 kW, 3-phase 400 V Standard configuration: Grooving tool with movable bending jaws and height-adjustable grooving blade. Very good, like-new condition

Size: 166 x 211 mmEquipments:Full Automatic line of High Die Cutter for Cards (Business, Phone, Loyalty, Membership), Labels, ticketsST-18.02 Strip stock feederSE-18.2 Infeed and Cross Cutter with Automatic ProgramD-18 Die Cutting Punch Unit with 2 chasesPB-18.1 Banding machine with deliveryStrip length min./max. : 350/1130 mmStrip width min./max. : 45/180 mmPrecut label size min. : 25x45 mmPrecut label size max. : 150x180 mmDie cut size min. : 20x41 mmDie cut size max. : 145x175 mmStack heigh min./max. : 45x125 mmMin. trim per side for die cut : 2 mmIntermediate trim cut : 3 mm / 22 mmHeight of cutting die : 60 - 100 mmMecanical Speed : 10 - 15 strokes per minuteDie Cut Pressure : 4 - 5 TonsBanding machine, width : 25 mmMachine is controled with program and screenElecrical datas : 380V, 50 Hz, 6.8 KW, 16 Amp.Air supply required : 6 bars dry air (30 - 45 m3/h) incl. 30% reserveDimensions ...

Size: 320 × 550 mmEquipments:Sheet feeder:Two drum feeders with gripper systemBelt conveyor channel for product conveyingSurface with rice paper structure to protect the productFront stop made of aluminumSide guides with sorting screws for sheet positioningScrew ejector for precise bow positioningSheet control system:Double sheet inspection using mechanical thickness measurementMisaligned bow detection using photocellPhotocell-controlled activation of the second feeder and glue injection timingGlue unit:Hot melt or cold glue application (configurable)Glue injector with digital keyboard settingDelivery:Double roller press station for optimal adhesionInclined conveyor belt for shingled product stacking at the exitControl system:SPS control unitTouchscreen control panelSafety system with light barriersTechnical data:Min. Format 100 × 150 mmMax. Format 320 × 550 mmMax. sheet thickness 5 m ...

Size: 0x0

Size: 0x0

Size: 1360 x 1200 mmEquipments:Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hrAutomatic Palletizingproduct infeed via accumulating conveyorPallet dimensions: 1360 x 1200 - 1000 x 800travel stop for dropping of very smooth productspallet removal in moving directionPallet sizes 1,360 x 1,200 or 1,000 x 800mmSpeed 30 Stacks/min

BOSTON 4 head flat and saddle stitching machine double wire

BOSTON 4 head flat and saddle stitching machine double wire

with original HDM hot foil stamping device

with original HDM hot foil stamping device

Pitney & Bowes envelope feeder, model DI 380, serviced, clean and tested. Available immediately.

Melton hotmelt adhesive appllicating system.

Sumbel Herold 800 banding machine; cleaned and tested; Working width 800mm; suitable for cold glue. Gluing machine Sumbel Herold 800; cleaned and checked; working width 800mm; used for cold glue.

Inserting Machine Neopost (Quadient) DS200 Configuration: Inserting System DS-200 Tower Feeder 2 with reading Inserts Hatchet feeding with reading Storage Tape Fsbrqbgjyttidsv Iofw Machine permanently in maintenance contract until 31.1.2026 ! Last machine maintenance in 12/2025 ! Little walked.

Eyelet machine Piccolo for sale Sell a Piccolo eyelet machine in good, working condition. Ideal for inserting eyelets in paper, cardboard, leather or plastic. Easy hand operation and stable design. Inspection and test possible.

HS Heiber + Schroeder WP 11 D - window patching year 1991 in production good condition

Condition: Very good condition