accessories for machine tools used for sale (2,507)

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

Hydraulic

Various guide rifles

in cassette

in cassette

Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee

complete device Flow temperature max 55 C° Engine 1.05kW-230/400V 50 Hz was attached to DMG MORI we have even more suction systems. Please ask.

Oil mist separator complete device Air output 1100 m3/h Flow temperature 5-45 C° Engine 1.45 kW-230/400V 50 Hz

Hardening testers Manufacturer Zwick& Co. KG. Wolpert or others For testing or measuring the -RockwellC, MPA and JHT -Vickers hardness - and other Extensive accessories of weights, measuring plates, test diamond Special price

Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Plan knife head, knife head in wooden box Manufacturer Tizit (today CERATIZIT - Group) Type Max Mill Plansee Diameter approx. 255mm 14 inserts Diameter tool holder 60mm Hole circle for recording approx. 100mm Number of holes 4 pieces Accessories: 33 inserts, torx key Milling Knife Head Comet Sandvik Coromant Klenk Insert Turning Tools EcoCut cutting tools Insert milling tools Tools with high-hard cutting materials Special price

Planscheibein little used condition Manufacturer TG Diameter approx.500mm Body bearing traces (can be easily removed!) Through hole, approx. 90 mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Electrical magnet size 1000 x 300m 110 volt supply IP 66

Alu clamping table - clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine Number: 18285 Built: xxxx Technical data: - Plate surface well preserved - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs screw-on - bars 50 x 20 mm - various holes partly with thread - Intermediate bars between the upper plate and under the support surface - 4 towing eyes - Weight approx. 180 kg

Key data: 500

Flat disc Bison 500 mm direct opname 55027-6 1 klauw heeft een lichte kras, verder als nieuw !

New Lambertini 4 jaw independent chuck 500 mm adaptation DIN 55027 - 11

Self-centering 4 jaw lining NEW Bearings: 315 mm type 3704 400 mm type 3704 400 mm type 3744-11

Key data: 800

1 set of jaws for flat disc 4305- 800 mm NEW

Plan disc Bison New in original packaging

Spaen centrifuge in the run-through process CEPA Padberg Y. 1986 1400 rpm Diameter 500 mm Spaene throughput up to 600 L/per hr = approx. 1.2 to. / Hour incl Spaene supply Plant Tuev prued until 2016 (last check see sticker) In the fully automatic AS series, short rieselfaehige Spaene are continuously and equally fed from above via a foerderer of the centrifuge. Entoelung short, rieselfaehiger spaene, aluminium and steel Continuously Up to 600 l/h

2pcs 3500 x 2000 x 350 mm

6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc

two cubes 1850x1200x700mm weight of one 1850kg one has some cracs on the ribs but can be welded Price for both pcs 5000eur

Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg

7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc

Fixed tensioner, mechanical vice with fixed jaw, B= 50, 72, 100mm, length 200 + 270mm, high-precision version made of hardened tool steel. Additional possibility for middle jaw for 2-part voltage. 100% manufactured in Austria directly from the manufacturer.

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

Tables for hydrsulic press for clamping on the stump or for the edition on the table. Multiple available. The tables are from a 420to press with installation height 1,250mm The round tables have a continuous opening in the middle. More data and photos on request