accessories for machine tools used for sale (2,332)

faceplate diameter:620 mmweight of the machine ca.:0,15 tBore:130 mm

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts

faceplate diameter:500 mmweight of the machine ca.:0,1 t4-jaw faceplate for studs and locknut

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.

size of pallet:400x400 mmnumbers of pallets:15 table load:400 kgweight of the machine ca.:0,060 tdimensions of the machine ca.:0,4 x 0,4 m15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

length:1000 mmwidth:800 mmweight of the machine ca.:0,7 tdimensions of the machine ca.:1,0 x 0,8 x 1,4 mHardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.

floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m

floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m

tool taper:50 weight:0,04 t

diameter:500 mmtool adaptor:50 Weight:12 kgface movement each head:82 mmfeeds:0,06 mm/U

workstation with dust exhauster

feed pressure:13 bartotal power requirement:3 kWweight of the machine ca.:0,15 tdimensions of the machine ca.:1,0 x 0,8 x 1,2 mHigh pressure air cooling device

length:500 mmwidth:320 mmheight:800 mmweight of the machine ca.:0,25 tAngular clamping device made by cast ironwith 5 T-slotss 22 mm

tool taper:40 weight:0,1 tAppr. 60 ISO 40 NC arbors with various clamping shaftsPackage selling or individual possible, min. 5 pieces

weight:400 kg8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mmwas used for clamping rings on a Vertical Turning Machine

Article: profile turning trip dogManufacturer: SchütteMany different sizes for Schütte profile turning attachment 68AEPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Unused AC motor made bei E.M.G. Italy with 260 Watt power and adapted Cucchi pump

Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: three-phase current motorManufacturer: Antriebstechnik BauknechtType: RFV 22/4-75Pe.g. to use as spindle motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Technical description :CLAMPING/ MOUNTING TABLE- Length 2600mm- Width 1500mm- Height 250mm

Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Tool drive motor for e.g. Schütte S32PC, not usedVariable tool drive for e.g. pickoff in positions A, B, C, DPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, usedpickoff C26GFpickoff shaft C26GF9S1gear WG-67SPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw barManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

A pallet of clamping devices – threaded rods – collets – clamps – clamping clamps – threaded rods – clamping devices – clamping aids – means for clamping – clamping tool

360° rotatable, delivered in original packaging Auction-ID: A1-48552-18

20-pcs HSS milling set in wooden box, 2 and 4 cutters, 3-4-5-6-8-10-12-14-16-20 mm, delivered in original packaging Auction-ID: A1-48552-95

workpiece length - max.: 3000 mmfeed length: - mmlength: - mmpower capacity: 2 kWWeight: 1300 kgWith control panel HBG 10A guide channel, size of approx. 60 mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: ca. 660 mmgrinding width: ca. 370 mmworkpiece height: - mmtotal power requirement: 7 kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 2800x2200x1890 mmHorizontal Surface Grinder in Like-New ConditionThe machine has been in operation for only a few hours.Working Arealongitudinal direction 660 mmcross direction 370 mmWorkpiece weight (max.) 420 kgDistance from spindle axis to table surface 70-540 mmTable Dimensions 300x600 mmScale Ring Graduation (Y-Axis) 0.02 mmScale Ring Graduation (Z-Axis) 0.005 mmAutomatic Cross Feed (Z-Axis) 0.1 - 8 mmVertical adjustment manually via a handwheel 440 mmHydraulic Feed (X-Axis) 7 - 23 m/minRapid Traverse (Y-Axis) 990 mm/minRapid traverse, Z-axis 460 mm/minDrive SpecificationsGrinding spindle motor power 5.5 kWSpindle motor 1450 rpmDimensions and WeightsGrinding wheel dimensions 355 x 4 ...