boring mills, machining centers used for sale (567)

bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30.0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 225 - 4300 U/minengine output: 1.0 / 1.6 kWcolumn diameter: 115 mmdistance spindle /table: 132 / 724 mmweight: 260 kgMachine height: 1790 mmFurnishing:- stepless speed adjustment- Reversing switch for R / L run- digital speed display- Connector and cable mounted- Spindle protection with electr. validation- 2 mtr. Connection cable with plug 16AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23.0 mmthroat: 250 mmbore stroke: 100 mmmorse taper: 2 MKtable:: 370 x 300 mmturning speeds: 225 - 4300 U/mincolumn diameter: 90.0 mmdistance spindle /table: 140 / 670 mmengine output: 0.6 / 0.95 kWweight: 175 kgMachine height: 1770 mmFurnishing :- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for clockwise and counterclockwise rotation- Motor protection switch- Infinitely variable speed adjustment- Digital speed display- Protection class IP 54- Connection plug (fully assembled, cable length 2m)- Spindle protection with electrical fuse- Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35,0 mmbore capacity in cast iron: 40,0 mmthroat: 320 mmthreading: M 24 in Stahlmorse taper: 4 MKbore stroke: 160 mmturning speeds: 65 - 3250 U/mintable:: 500 x 420 mmthroat: 320 mmweight: 375 kgrange L-W-H: 600 x 870 x 2.170 mmFurnishing:- Infinitely variable speed, ideal for- Set the desired cutting speed.- Automatic tool ejector and thread cutting device as standard- Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev- Solid gray cast iron table with rotating and swiveling support surface- T-slots in the machine base enable high workpieces to be clamped- Guaranteed concentricity 0.02 mm, measured in the quill- Hardened and ground gears ensure smooth running- Adjustable drilling depth stop with an easily readable scaleScope of delivery:- Key chuck 1 - 13 mm / B 16- Drill chuck arbor MK 4 / B 16- Reducing sleeve MT 4/3, MT 4/2- coolant  ...

bore capacity in steel (diameter): 60.0 mmthreading: M 42 throat: 350 mmbore stroke: 200 mmturning speeds: 60 - 1530 U/mintable:: 720 x 510 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 200 mmfeed: 0.15-0.2-0.3-0.36 mm/Udistance spindle /table: 159 / 884 mmengine output: 3.6 / 4.3 kWweight: 605 kgMachine height: 1950 mmFurnishing :- automatic feed with electromagn. Feed clutch- 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validation- digital speed display- machined base plateincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55.0 mmthreading: M 30 / M 42 throat: 300 mmbore stroke: 140 mmturning speeds: 70 - 1200 U/mintable:: 615 x 430 mmbore spindles - Morse Taper: 4 Kurzspindel MKcolumn diameter: 145 mmfeed: 0.10 + 0.30 mm/Udistance spindle /table: 150 / 735 mmweight: 380 kgMachine height: 1850 mmFurnishing :- automatic feed- Feed device 0.1 + 0.3 mm / rev- stepless speed adjustment- digital speed display- Feed overload protection- Spindle protection with electr. validationincluding special equipment:- Coolant device mounted in the foot pos. 24.- Thread cutting device pos. 20.0 (Thread cutting with stop)- LED machine light pos. 12.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional s ...

gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.

bore capacity in steel (diameter): mmthroat: 290 mmbore stroke: 160 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mDescription to follow!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 290 mmbore stroke: 180 mmtotal power requirement: 1,9 kWweight of the machine ca.: tdimensions of the machine ca.: mDescription to follow!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network conn ...

Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630

1 used WEINMANN Gebertisch, built in 2022, as good as new, For now.. without control, as this remains in the overall production control. Control is about 6000 euros new from Weinmann. Size 12 x 3 m - Model BuildteQ A 570.. Sale as seen from site without warranty, dismantling is helped with overhead crane and forklift free of charge without warranty.

Olive and pot belt drilling machine Ganner for windows Type 370 Machine No. 190469 Built in 1994 Combined Corner Bearing and Olive Drilling Machine Drill head with 3 drill bits Motor power 0.75 kW 2800 rpm Compressed air connection 5 – 7 bar Suction nozzle diameter 100 mm Well functioning condition Dimensions approx. 2700 x 900 x 1400 mm Weight approx. 250 kg

OFFER - KRÜSIMATIC from Krüsi G1 4 axis system 1 used carpentry machine from KRUeSI type Kruesimatic G1 Year of manufacture 2005 Can be operated with all carpentry programs such as Catwork, SEMA, Lockrichs, S & S, Nut Reiner, etc. 4 axis system with dovetail cutter Task / Editing from right to left 6 Side processing without having to turn the wood! Total length approx. 18 m Weight 5.5 t BTL controlled for interface to the office or of course manual input on the machine. To increase the cutting performance, the feed rate is frequency-controlled and can be optimized for many cross-cut cuts Platform height without floor shaft 920 mm Sections fall into mobile box incl. chips The system only needs to be connected to the electrical cabinet with plugs Max. wood cross-section - 200mm x 320 mm Plant set up and ready for demonstration Available IMMEDIATELY The entire system ha ...

1

Weinmann Profi WBZ160 Brand: Weinmann Type: WBZ160 Profi Year of Make: 2014 Control PC86, Wupworks, Schuler MDE, woodScout Homag Power Control: Homatic Power Control - Homatic CNC System PC85 with Windows XP (US) embedded industrial PC Selection menu, Alarm texts in plain text, Ethernet connection, Remote diagnostics, Post-processor connection - 1 hard drive - 1 hard drive for data backup - 1 CD-ROM drive - 1 USB port - Colour monitor 17 inches with PC keyboard and mouse The data for the processing of the individual bars can be transferred directly from the CAD system via LAN/USB stick/CD. Optionally, the data can be entered directly on the machine. Machine operation by one person. Includes automatic collection. Fully integrated cutting optimization. Specifications: Workpiece length max X: 13,700 mm Workpiece width max Y: 405 mm Wor ...

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Birth Smoking Machine Specifications: Table size600 x 320 mm Borehole depth205 mm Drill hole length250 mm Height adjustment165 mm Engine speed 2840 rpm Weight180 kg

Code: 0150 Brand: BREMA Model: GLR - CE Standard CNC vertical working centre with rollers for drilling, milling, shaping and automatic insertion of any hardware insert to obtain the workpiece ready for final assembly of the furniture - CE Standard Technical data: The high flexibility of this system allows to reduce big stocks and big stores and eliminate dead-times for setting up boring machines. Different units and toolings can be mounted allowing to obtain mass-produced or made to order pieces, which are divided according to their dimensions or colour only Composition: Vertical panel store with automatic panel drawing Roller connection device Roller loading device 8-position revolver head where 8 different heads can be mounted, complete with vacuum device - The electronic part can control from 5 to 11 axis depending on the equipment Hardware insertion units: each ...

MAKA

Code: 0149 Brand: STEMA - 2BR Model: INSERMATIC CB/JUNIOR 86 Manual drilling and inserting machine for hinges or plates for kitchen, bathroom, custom furniture, panels and various Upright frame with table 1 mt Electropneumatic drilling unit with Hp 2 motor 3000 rpm Drilling head with 3 spindles for hinges Hinge housing pad N° 3 stops placed on table Dust collector complete with bags Foot pedal for start Voltage 400 V - 50 Hz Overall dimensions mm 1000 x 1100 x 1750 h Weight kg 130

Code: 0147 Brand: BREMA Model: GLV/M 2800 X 1000 - CE Standard CNC working center for furniture, kitchens, cabinets, panels, and various - CE Standard Vacuum system for clamping the panel with manually adjustable suction cups. Such a system allows machining of the workpiece on all its sides. In addition, the 8 tools mounted in the revolver head, perform any type of machining required. Useful panel working dimension with all tools : Length mm 2800 - Height mm 1000 N° 3 controlled axis Numerical control CNC/90 Compressed air 6-7 bar Power Kw 15 Overall dimensions mm 4280 x 2200 x 2480 h Weight kg 4900

Beam cutting center STROMAB CT800 Beam cutting center with large cross-sections, making it an optimal solution for carpentry and frame construction. Thanks to its electronically controlled 5-axis technology, it meets all requirements for straight, tilt and complex cutting. It guarantees maximum processing speed and finished product quality, reducing labor and maximizing production. The CT800 can process beams of any length and cross-sections from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilted upper hold-downs Specification:. Motor Power: 18 kw TCT Disc: 800mm Number of electronically controlled axes: 4 Table saw rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Dial angle: 90° ÷ 45° Positioning Speed: 0 ÷ 17 mt./min Cutting range: . At 90° with single stroke: mm. 280×290 / 250×390 / 200×450 At 90 ...

Carpentry machine Hundegger k2 625 5 axis year 2003

travel -x axis: 1800 mmtravel -y axis: 520 mmtravel -z axis: 520 mmtool taper: SK 40 table load: 3 ttool piece magazine with: 30 Plätze spindle drive: 22 kWmax. torque on the spindle: 220 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 28000 kgLoading weight per level: 2000 kgNumber of load levels: 2 x 7 Stk.Recommended material length: 6000 mmColumn width: 3000 mmShelf height: 2440 mmdimensions: 3,7 x 2,55 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 3 MKtable:: 500 x 350 mmcolumn diameter: 105 mmturning speeds: 75 - 3010 U/mintotal power requirement: 0,9 / 1,2 kWweight of the machine ca.: 235 kg.range L-W-H: 1740 x 670 x 850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oscillating Drilling Machine COMEC MM0 10 3L Number of horizontal spindles per page 4 Drilling distance between centers during chiselling: min/max: 45/760mm Drilling distance between centers during straight drilling: min/max 45/850mm Hole length 0-100mmm Spindle speed 4500/9000 rpm 3 independently adjustable oscillations Oscillation motor 1.5kw Total power 7kw Pneumatic material clamps Maximum workpiece dimensions 1000x 100x 100mm Capacity 600pcs/h (300+300) CE Certified Year of production 2005 Machine dimensions: 1450x1650x1350cmH Weight about 1000kg