boring mills, machining centers used for sale (531)

Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm ar ...

bore capacity in steel St 60: 30 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 225 - 4300 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

Drilling and sawing machine for side rails Franke type SG Technical data: Station 1: Cutting components to length Station 2: Drilled on the front side in increments of 27, 32 or 60 mm, 95 mm deep Station 3: drill another hole on the front side or the holes from station 1 are blown out Station 4: Deflection Testing

CNC working center model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. maximum panel thickness mm.120 maximum panel clearance mm.150 installed power 16 kW machine weight 4500 kg

Drill Comec FMC 900+ AGG Automatic loading from the magazine Number of spindles 3 Number of milling spindles 1 3kw main motor 0.5kw milling machine motor Element length max 900mm Element width max 100mm Maximum drilling distance 800mm Use in large series of chairs, beds, cots as well as in components of other furniture Net price

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

This 4-axis MASTERWOOD Ks 21.31 wood boring machine was manufactured in 2019. It features an impressive XYZ working dimension of 3100 x 2150 x 100 mm and a tool magazine with a maximum capacity of 12 tools. The machine is equipped with an automatic loading and unloading system using suction cups and has a 360-degree rotation axis. If you are looking to get high-quality boring capabilities, consider the MASTERWOOD Ks 21.31 machine we have for sale. Contact us for further details.

Dowel Drill VITAP Row Hole Drilling Machine Type ALFA 21 Year of construction 2006 Drilling unit with 21 drills in 32 pitch Drilling unit pneumatically swivel 45° Distance between the first and the last spindle 640 mm Maximum drilling depth 70 mm Spindle revolutions 2800 rpm. Motor power 1.8 kW Operating pressure 6-8 bar Left and right adjustable stop on machine table With length stops Weight with pallet approx. 330 kg

Pitch: 32 mmWorking width: 896 mmBoring depth max.: 65 mmMotor output: 2x1,5 kWOverall size: 1122x1040x1250 mmWeight: 380 kgNumber of boring spindles: 29 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mmWorking width: 1088 mmBoring depth max.: 85 mmMotor output: 2x1,5 kWOverall size: 1320x1040x1250 mmWeight: kgNumber of boring spindles: St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mmWorking width: 704 mmBoring depth max.: 70 mmMotor output: 1,5 kWWeight: 310 kgNumber of boring spindles: 23 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operat ...

This 4-axis SCM TECH Z2-27-C wood boring machine was manufactured in 2010. It features a maximum workpiece height of 160 mm, length of 2700 mm, and width of 1300 mm. The machine includes a routing spindle and a horizontal boring unit, ensuring versatility in operations. If you are looking to get high-quality wood processing capabilities, consider the SCM TECH Z2-27-C machine we have for sale. Contact us for further details.

This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details.

Code: 0348 Brand: VITAP - ITALY Model: POINT K2 TOP - CE CE Standard CNC working centre for the precise and flexible drilling and milling of panels, furniture, custom-made furniture, kitchens, bathroom furniture and various – CE Standard – Year 2017 Technical specifications: Compact machine Patented D.D.T. (double dynamic transport) system with continuous panel movement without any repositioning of the workpiece, using two clamps. Technical data: Panel dimensions: Min/max length 270/3000 mm Min/max width 180/1100 mm Max height 50 mm Horizontal panel feed on X-axis 25 mt/min Vertical feed on Z-axis 15 mt/min Horizontal feed on Y-axis 30 mt/min Drilling head: Motor 2 Hp 12 vertical spindles side 1 Z-axis 2 horizontal spindles side 4 Y-axis 2 horizontal spindles side 6 of the Y-axis 2 horizontal spindles side 3 X-axis 2 horizontal spindles side 5 X-a ...

Dowel and slotted hole drilling machine HOFFMANN HT 200 very good condition, the machine comes from an educational institution, has been used only a little and is as good as new, it has very few signs of use this allows slotted holes to be milled and dowel holes to be drilled, and the drilling height can be read very precisely on a digital counter with 3 drill bit holders: for drills with M10 external thread and for drills with 12mm and with 16mm shank, plus you get a 2-jaw chuck for drills from 3- 20mm with workpiece auxiliary supports on the left and right, which can be swivelled and have a carrier roller the machine has a landing gear with 2 angle stops on the machine table for left and right The clamping arms can be moved and moved with stake-out device for parapet railings, which is adjustable from 80-160mm and has a digital counter, with pick-up mushroom 380V, 1400 and  ...

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Manufacturer: Homag Doppelspindelfräse 4 Achsmaschine, Type: BMG 512, Control: Woodwoop 6.0, Min.-max. workpiece length in mm: 4500, Min.-max. workpiece height in mm: 1600, Aluminium processing: 300, Throuh running machine: yes, Feeding speed max m/min: yes, C axis: 2, B-axis: HSK 63, Pendulum processing: ca.12, Work piece width min-max mm: 1800-24000, Min.-max. workpiece length in mm: ca.12, Horizontal: 1, Number of milling spindles vertical: 14, rpm 1): 9, Milling engine 2 hours power: 6, rpm 2): 2, Number of tool changers: 2, Kettenwechsler: yes, Pickup Wechlser: yes, Working widht max mm: 6, Horizontal drills-X: yes, Belt conveyor: yes, Number of tables: yes, Traverse table: 120, Aluminium sleeking table: Automatisch, roller table: 16, 2 station allocation: yes, Stops in the table rear: yes, Drill vertical: yes, Edgeband hight mm: yes, Magazine Qty: no, Schnittstelle DXF: ink.Werkze ...

Manufacturer: Biesse 5 Achsmaschine, Type: Arrow FT-5 Achsmaschine, Year: 2007, Control: XP 600, Working range X: 2 X 1600 , Working range Y-axis: 2600, Working range Z: 300, C axis: yes, B-axis: yes, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): ca. 24000, Number of tools per tool-magazine: 10, Vertical drills-X: 18, Horizontal drills-X: 3, Number of tables: 2, raster table: yes, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 250, Drill vertical: 3, Saw unit: 120 mm, Portal machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, Zentralschnierung: yes, Available: sofort, FREE TEXT: Wassergekühlte Spindel, Year :2007

Manufacturer: Homag BAZ , Type: 211 Venture 22 L, Year: 2006, Control: Woodwop/Powercontrol PC 85, Software: Softwarepaket AV, Work piece width min-max mm: 4400 X 1550, Feeding speed max m/min: X= 80/Y=80/Z=30, C axis: yes/Schnittstelle Flex 5, Pendulum processing: yes, Work piece width min-max mm: 4400 X 1550, Number of milling spindles: 1, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 12, rpm 1): 1500-24000, Number of tool changers: 1, Tellerwechseler: 1, Pickup Wechlser: Verleimteil/Easy Edge, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 1, Drill horizontal Y: 2, Traverse table: 8 Traversen, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 60, LED-Rüs ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Homag, Type: BAZ 20/50/16/V/KA, Year: 2000, Control: NC-83, Software: Woodwop, Barcode: möglich, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 250, C axis: yes, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, rpm 1): 1500-18000, Number of tool changers: 1, Kettenwechsler: yes, Number of tools per tool-magazine: 70, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Number of tables: 8 Traversen, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 140, Saw unit: yes, Edgebanding unit: 360 Grad, Edgeband hight mm: 10-60, Magazine Qty: 6-fach, Radial arm machine: yes, incl. tools: yes, machine ready for demonstration: yes, Automatic setting up table: yes, CE-Sign:  ...

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging support ...

Manufacturer: IMA H 610 Tandem, Type: BIMA 610/2H/875, Year: 1997, Software: IMAWOOP, Working range X: 5.700, Working range Y-axis: 1.900, Working range Z: 440, C axis: yes, Programming station office: möglich, Work piece width min-max mm: 150 - 1.200, Min.-max. workpiece length in mm: 250 - 5200, Min.-max. workpiece height in mm: 10 - 120, Pendulum processing: yes, Number of milling spindles: 2, Tool adaption system: HSK 63F, Milling engine 1 hours power: 7,5, rpm 1): 1.500 - 18.000, Milling engine 2 hours power: 7,5, rpm 2): 1.500 - 18.000, Vertical drills-X: 2 x 7, Drill vertical Y: 2 x 12, Traverse table: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 200, Saw unit: yes, Edgebanding unit: no, Radial arm machine: yes, Year :1997

Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011