boring mills, machining centers used for sale (581)

Manufacturer: Bürkle, Type: RCLS 700, Year of construction: 2014, Finished product: Concrete slabs, Workpiece width min-max mm: 700, Workpiece height min-max mm: 3 - 80, Workpiece length min-max mm: 400, Feed min-max m/min: 2 - 10, Control: Bürkle, Infeed conveyor: no, IR dryer 1: 20 x 3 kW, Transport 1: Strip/bar, coating roller 3: RCLS 700, UV dryer lamps/watt: 120, UV dryer lamps/watt: 120, paint rollers total: 2, UV dryer total: 2, IR dryer total: 1, UV dryer total: 2, UV dryer: Easy Cure UV 700, conveyor belts: 0, incl. dosing roller heater,

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year of manufacture: 2011, Control: Biesse, Software: Works, Workpiece width min-max mm: 1,535, Workpiece length min-max mm: 4,600, Workpiece height min- max mm: 225, Working area X: 5.255, Working area Y: 1.963, Working area Z: 350, Pendulum machining: yes, Workpiece width min-max mm: 1.535, Workpiece length min- max mm: 4,600, Workpiece height min- max mm: 225, Number of milling spindles: 2, Tool holder: HSK F63, Milling spindle 1 kW: 12, Chain changer: 22, Drill vertical X: 12, Drill vertical Y: 17, Drill

Manufacturer: Giardina , Type: Water UV spraying line, Year of construction: 2005, Machine control higher: yes, Workpiece width min-max mm: 900, Workpiece height min-max mm: 10 - 100, Workpiece length min-max mm: 4500, Feed m/min: 2-6, UV line: yes, Water-based coating line + UV: yes, Infeed conveyor: 2500, Dedusting machines: yes, Spraying machine: Dualtech 301, 2 paint circles: yes, Conveyor belt: yes, Infeed roller table: yes, Angle transfer: yes, Microwave drying: yes, Nozzle dryer mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV dryer lamps: 2 of

Manufacturer: Homag with glued part, Type: Optimat BOF / 40 / G , Year of construction: 2000, Control: WoodWOP, Programming station office: yes, Workpiece width min-max mm: 1050/1200, Workpiece length min- max mm: 4800, Workpiece height min- max mm: 60/200, C-axis: yes, Tool holder: HSK F63, Milling spindle 1 kW: 12, rpm 1): 1500 - 18000, Number of Tool Changers: 1, Tool Change Positions: 12, Moving Tool Changer: yes, Drill Vertical X: 11, Drill Vertical Y: 7, Drill Horizontal X: 4, Aluminum Straightening Table: yes, 2 Seat Occupancy: 2, Stops in the Front Table: 6 ,

Manufacturer: Morbidelli, Type: U 50, Year of manufacture: 1991, Control: Num, Workpiece length min- max mm: 150-3150, Workpiece height min- max mm: 10-60, Working range X: 3150, Working area Y: 1300, Working area Z: 60, C-axis: no, Pendulum machining: yes, Workpiece length min- max mm: 150-3150, Workpiece height min- max mm: 10-60, Number of vertical milling spindles: 2, Tool holder: quick clamping system, milling spindle 1 kW: approx. 4.4, rpm 1): 12000/18000, milling spindle 2 kW: approx. 4.4, number of tool changers: none, vertical drill X: approx. 14, vertical drill Y:

Manufacturer: Morbidelli, Type: Author 600, Year of manufacture: 1999, Control: Num 1040/X-Log, Workpiece width min-max mm: 1680, Workpiece length min- max mm: 4400, Workpiece height min- max mm: 10-80, Working area X: 4829, Working area Y: 1774, Working area Z: 180(280), C-axis: yes, Number of milling spindles: 1, Tool holder: ISO, Milling spindle 1 kW: 7.5, Number of tool changers: 2, Tool change stations: 4 + 8, Moving tool changer: yes, Drill vertical X: 12, Drill vertical Y: 6, Drill Horizontal X: 4, Drill Horizontal Y: 2, Truss table: yes, 4

Manufacturer: Vitap, Type: Point K2, Year of manufacture: 2018, Barcode scanner: yes, Processing stations: 1050, Workpiece width min-max mm: 1010, Workpiece length min-max mm: infinity, Workpiece thickness min-max mm: 50, 3 Axis control: yes, Working area X: 270 - infinity, Working area Y: 185 - 1200, Working area Z: 4 - 50, Vertical drilling stations from below: 9, Milling spindles horizontal: 1 vertical, kW power 1: 5.0, rpm min-max 1: 12,000 - 24,000, milling spindles vertical: yes, drill horizontal X: 2 + 2, drill horizontal Y: 1 + 1, sawing units: 100 mm,

Manufacturer: Weeke, Type: BHC 600 Profiline, Year of manufacture: 2003, Control: Weeke, Working area X: 9,000, Working area Y: 1,790, Working range Z: 370, C-axis: yes, Workpiece width min-max mm: 1,300, Workpiece length min- max mm: 7,250, Workpiece height min- max mm: 100, Feed max m/min: 80, Pendulum machining: yes, Number of milling spindles vertical: 1, Tool holder: HSK 63, Milling spindle 1 kW: 12, Number of tool changers: 2, Plate changer: 2, Tool change stations: 8 + 18, Moving tool changer: yes, Drill vertical X: 10, Drill vertical Y: 10, Drill

Manufacturer: Biesse, Type: Rover 6.50 5-axis machine conf.2, Year of manufacture: 2006, Software: Editor 2.2.1.273, Working area X: 4600, Working area Y: 1535, Working area Z: 230, C-axis: yes, B-axis: yes, Office programming station: possible, Pendulum machining: yes, Number of milling spindles vertical: 1, Milling spindle 1 kW: 12, RPM 1): 1500-2400, Number of tool changers: 1, Chain changer: yes, Tool changing stations: 14, Moving tool changer: yes, Truss table: yes, 4 Seat occupancy: yes, Stops in the front table: yes, Stops in the back table: yes, Vacuum pumps

Manufacturer: Cefla, Type: Easy 2000, Year of manufacture: 2006, Workpiece width min-max mm: 10-1300, Workpiece height min-max mm: 10-60, Workpiece length min-max mm: 100-3000, Total length meter: approx. 25, Feed m/min: 3-5, Water-based coating line: yes, Infeed conveyor: yes, Dedusting: yes, Workpiece recognition: yes, Transport system: Conveyor, Spray stations: 2, Quick-change system Gun carrier: yes, Paint circles: 4, Paint system Airless: yes, Paint system Airmix: yes, Paint recovery: yes, Via rollers: Yes, Via squeegee: Yes, Water purification: Yes, Recirculating air dryer mm Length mm:

Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year of manufacture: 1998, Control: Homatic, Feed max m/min: 80, Working area X: 5600, Working area Y: 1600, Working area Z: 60/120, C-axis: yes, B-axis: no, Tool holder: HSK F 63, Milling spindle 1 kW: 12, RPM 1): 1500 - 18000, Number of tool changers: 1, Tool change stations: 30, Drill vertical X: 5, Drill vertical Y: 5, Grid table: Glattisch, 2 Seats: yes, 4 Seats: yes, Stops in the front table: 14, Stops in the back table: 3, Vacuum pumps m³/h: 66 + 100, Sawing unit: yes,

Manufacturer: Biesse , Type: Rover 24, Year of manufacture: 2002, Software: Compass can be purchased with, B-axis: 100/50/20, Machine control: 6170, Programming station office: 1380, Workpiece width min-max mm: 150, Workpiece length min- max mm: yes, Aluminium machining: 1, Continuous drilling rig: HSK F-63, Feed max m/min: 7.5, Pendulum machining: 1800-24000, Number of milling spindles vertical: 1, Tool holder: 24, Milling spindle 1 kW: 8, RPM 1): 7, Milling spindle 2 kW: 4, RPM 2): 2, Working width max mm: 2, Drill vertical X: 10, Drill vertical Y: yes, Drill Horizontal X: yes,

Manufacturer: Priess und Horstmann Automatic Front Drilling, Type: BAT III, Year of construction: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 axis control: 3, Working area X: 2 X 1500, Workpiece width min-max mm: 190 - 600, Workpiece length min-max mm: 100 - 1500, Workpiece thickness min-max mm: 10 - 60, Set-up automatic: yes, Drilling supports from below: 7 spindles, drilling supports from above: yes, number of milling spindles: 1 , kW power 2: 2.2, rpm min-max 2: 18000, sawing units: 1.6 kW, belt screwing units: yes, feed max m/min: 60/80/10,

Manufacturer: Weeke, Type: Optimat BP 145, Year of manufacture: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working area X: 3250, Working area Y: 1300, Working area Z: 100, C-axis: yes, Feed max m/min: 80/60/20, Pendulum machining: yes, Number of milling spindles: 1, Tool holder: HSK63F Taper, Milling spindle 1 kW: 9, rpm 1): 1250-24000 FU controlled, rpm 2): t, Number of tool changers: 1, Plate changer: yes, Tool change stations: 8, Moving tool changer: yes, Drill Horizontal X: 4, Drill Horizontal Y: 2, Truss table: yes, Stops in the front table: yes,

Manufacturer: Reichenbacher, Year of manufacture: 2011, Control: Siemens Sinumerik 840 D Solution Line with NCU 720.2, Software: Frame-Concept, Workpiece width min-max mm: 300-1500, Workpiece length min- max mm: 2 X 2200 or 1 X 4000 X 1600, Workpiece height min- max mm: 10-120, Workpiece width min-max mm: 300-1500, Workpiece length min- max mm: 2 x 2200 or 1 x 4000 x 1600, number of milling spindles: 2 x 5 axis, tool holder: HSK 63, milling spindle 1 kW: 18, rpm 1): 1000-24000, chain changer: yes, number of tables: 2, truss table: yes, 2

Manufacturer: Morbidelli, Type: 503, Year of manufacture: 1998, Control: Tria 7000, Feed max m/min: 75, Working area X: 3200, Working area Y: 1050, Working area Z: 80, C-axis: yes, Number of milling spindles: 1, Tool holder: ISO 30, Milling spindle 1 kW: 7.5, rpm 1): 18000, Number of tool changers: 1, Tool change stations: 8, Drill vertical X: 11, Drill vertical Y: 7, Drill Horizontal X: 4, Drill Horizontal Y: 2, Truss Table: yes, 4 Place Occupancy: yes, Stops in the front table: yes, Stops in the back table: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30,