grinding machines wood used for sale (644)

Number of sanding units: 8 St.sanding width: 300 mmSanding height max.: 100 mmQuickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine------------------------------------------- ------------------------------------------------------------------Masc hine zur Längsholzbearbeitung- Lose Fasern werden von der Oberfläche entfernt- Erhebliche Reduzierung der Faserbildung nach der Grundierung- Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur- Bessere Tiefenwirkung im Holz- Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz- Stufenlose Einstellungen aller Geschwindigkeiten- Leichter Werkzeugwechsel durch abnehmbare Spindeln- Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite- Lieferbar auch mit weniger Schleifaggregate je nach Anwendung- Optionale PLC-Steuerung vorgesehenEinsatzmöglichkeiten- Fensterflügel- und- Rahmeneinze ...

Number of sanding units: 4 St.sanding width: 200 mmSanding height max.: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 190 mmSanding height max.: 2-180 mmLÖWER-Doppelseitige Schleifmaschine DSM 2000Doppelseitige Einzelholzschleifmaschine zum Schleifen vonMassivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus-führung mit langen Gußtischen, Bürst- und Finisheinrichtungund Transportbandvorschub. Geeignet für hohe Dauerbelastungauch bei höheren Spanabnahmen.- versetzt angeordnete Schleif- und Finishaggregate oben und unten- direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung- Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone- wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit- Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten- zwangsgeführte pneumatisch gesteu ...

connected load frequency: 230 Voutput: 1,2 KWtaper diameter: 19mm mmturning speeds: 1000 - 3000 U/minroll surface width: max. 100 mmroll length: max. 120 mmweight: 2,8 kgrange L-W-H: 430 x 280 x 100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 100,150 mmSanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St.sanding width: 200 mmSanding height max.: 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 290 mmSanding height max.: 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 390 mmSanding height max.: 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 Stsanding width: 190 mmSanding height max.: 2 - 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 8 st.sanding width: 180 (260) mmSanding height max.: 160 mmDimensions (L/W/H): 3065x1600x1900 mmweight of the machine ca.: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NUMBER 6145 TECHNICAL DATA - max workpiece width 1100mm - max workpiece height 140mm 3 aggregates: 1) grooved rubber roller for 15kW calibration 2) grooved rubber roller for 11kW calibration 3) grooved rubber roller for 11kW calibration in advance: - metal skid roller - rubber skid roller - aggregate - 2 rubber rollers, sliding - aggregate - 2 rubber skid rollers - aggregate - rubber skid roller from down: - feeding table 3600x1000mm - feed speed adjustable on the inverter 0.25kW - pulling tape - 3 rubber rollers, sliding, leading out - oscillation of pneumatic strips on photocells - blowing off the tapes - electric table lifting - 0.75kW motor lifting - smooth regulation of the feed speed - 2.2kW feed motor - with a vacum pump - 4kW pump motor - diameter of the extraction port 110mm, 80mm - working pressure 6-8bar - diameter of the extraction port 3 ...

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

Long belt grinding machine, roller spacing approx. 3000 mm

Belt grinding machine for wood & metal, roller spacing approx. 3000 mm

Grinding machine • For grinding curves and internal radii

Table belt grinding machine Hunziker L x W x H: 3.5 x 1.7 x 1.7 m The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11

TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200

Handcuper Meinert PH6 for gate saws

Automatic oscillating curve grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed continuously from 25 - 25 m/min Feed motor 0.55 KW Drive motor 7.5 kW Grinding belt 320 x 2000 mm

Working Length: 3100 or 4100

TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

Workpiece width max mm: 1700 Material thickness max mm: 100 02 Workbenches mm: 5000 x 1700 02 Oscillating aggregates Rollers (cotton) mm: 350 02 Roller motors HP: 18.5 Vacuum Table - HP 12.5

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading

Length: 2900 mm