grinding machines used for sale (2,499)

Sell some machines from our warehouse because we need the space to expand

TOS BUC 63A/3000 Cylindrical Grinding Machine Grinding Diameter 630 mm Grinding Length 3000 mm Height of centers 315 mm Workpiece Weight 2500 Kg Max. Grinding wheel dimensions 750 x 100 x 305 mm Spindle Speed 840/970 rpm Workpiece Spindle Speed 8 - 315 rpm Grinding support stroke 90 / 280 mm Table Speed: Variable - from 0.01 to 3.6 m / min Grinding Head Swivel 90 Degree Table Swivel +/- 5 Degree Work Head Tilts from 90 taper - Morse 6 Spindle Drive 15 KW Machine Dimensions 10000 x 3400 x 2000 mm Machine Weight 13.7 Ton Machine weight approx. 12 t Space requirement approx. 12 x 4.3 x 1.9 m Total power input 22 kW

grinding diameter: 630 mmgrinding length: 600 mmcentre height: 320 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine with heavy duty workhead.Machine will be partial overhauled before delivery.Machine will get a geometry protocoll according to the Kellenberger new machine guidelineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel Ø: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space requirement: 1050 x 580 x 1200 mm Weight approx.: 140 kg

Maximum length of the piece: 1100 mm, Minimum length of the piece: 50 mm, Maximum diameter of the piece: 125 mm, Minimum diameter of the piece: 8 mm, Center height of tailstock above guide: 145 mm, Center height of tailstock above carriage: 65 mm, Centering hole taper angle: 60°, Larger diameter of centering hole cone: 50 mm, Diameter of smallest centering hole: 2 mm, Grinding spindle speeds: 45000 / 22 500 / 13 000 rpm, Hollow screw speed: 400 rpm, Stroke of the grinding wheel along the grinding surface: 0.75 - 5 mm, Diameter of grinding wheels: 15, 27, 48 mm, Weight approx.: 460 kg, Dimensions (length x width x height): 850 x 750 x 1850 mm

grinding length: 600 mmgrinding width: 300 mmworkpiece height: 350 mmtotal power requirement: ? kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,522 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 8400 mmgrinding width: 1450 mmworkpiece height: 1250 mmsurface area: 8000 x 1250 mmtable height over floor: 920 mmdistance between columns: 1470 mmworkpiece weight max.: 59700 kgweight of the machine ca.: 59,7 tdimensions of the machine ca.: 22 x 5 x 5 mAdjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mmAdjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/minTable drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kWThe data for this ad was created wi ...

: 0600 mm: 300 mm: 342 mm: 700x340 mm: 355x38x127 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0800 mm: 400 mm: 342 mm: 900x460 mm: 355x38x127 mm: 2400 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mmgrinding width: 300 mmworkpiece height: 230 mmtable surface area: 1000 x 240 mmx-travel: 1000 mmy-travel: 270 mmz-travel: 350 mmgrinding wheel diameter: 240 mmgrinding spindle speed: 2180 U/mintable speed -stepless-: 3 - 30 m/mintotal power requirement: 4,5 kWweight of the machine ca.: 2,8 tdimensions of machine L x W x H: 2,36 x 1,37 x 2,0 mAccessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 250 mmworkpiece height: ca. 385 mmtable surface area: 600 x 200 mmtable speed -stepless-: 2 - 35 m/mintable load capacity: max. 250 kggrinding wheel size: ø 225 x 25 mmgrinding wheel hole diameter: 50,8 mmvertical feed autom.: 0,001 - 0,099 mmrapid traverse vertical: 600 mm/mincross feed of table continual: 10 - 1000 mm/minrapid traverse cross: 1000 mm/mintotal power requirement: 6 kVAdimensions of machine L x W x H: 2,65 x 1,70 x 2,28 mAccessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

Universal tool and cutting grinding machine TACCHELLA 4 AM - Universal device, Hydraulic movement of the table., Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 400 mm, Cross travel y axis: 250 mm, Clearance between worktable and spindle axis: 375 mm, Wheel speed: 3000/6000 rpm, Wheel dimension: 200x20 mm, Spindle motor power: 1,5 Kw, Weight: 1150 Kg, Accessories: Cooling system, motorized dividing device

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Ø min / max to be rectified: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Max. width of grinding wheel in plunge grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Min. ext. Ø of the working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Max. depth of working wheel profile: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Drive wheel dimensions (OD x ID x W): 220x125x125mm, Min. ext. Ø of the drive wheel: 165mm, Øext.min. driving wheel: 165mm, Max. depth of the drag wheel profile: 8mm, Driving wheel motor power: 0,75Kw, Working wheel motor power: 7,5Kw, Drive wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Angle of inclina ...

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

MAX DIAM 200

grinding diameter: 250 mmgrinding length: 400 mmcentre height: 125 mmControl: Fanuc 21i-T total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine gewartet und teilüberholt.-Neue Schleifspindellagerung-Neue x-Achs Spindel-Obertisch überschliffen-Neue Geometrie Tischgeometrie-Neue Geometrie WSS zu SchleifspindelnB-Achse mit 1° Hirth VerzahnungLängspositionierungHF-InnenschleifspindelGAPPapierbandfilte rThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

working area: mmspeed: m/minBar length: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

ELB SURFACE GRINDER 460x2440mm CNC Dresser

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

Various flanges

grinding diameter: 630 mmgrinding length: 600 mmcentre height: 320 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wird überholt nach Kellenberger Messprotokoll und neu lackiert.Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerungersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neueElektrik.Siehe Beispielfotos.Maschine mit verstärktem Werkstückspindelstock zumfliegend Schleifen von schweren Werkstücken.Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt.Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): Ø300 x Ø175 x 125 mm, Ø min/max to be rectified: 1.5 - 50 mm, Regulating wheel dimensions (od x id x width): Ø220 x Ø125 x 125 mm, Grinding wheel width: 125 mm, Number of revolutions engine power: 2,100 rpm, Grinding wheel head motor power: 7.5 HP, Total power: 8,5 Kw, Weight: 1.450 kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-f ...