injection moulding machines used for sale (856)

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

(1) Gas (2) Fuel (3) Electric: 0  Temperature maximum: 0 C°Capacity (kg): 0 kg Technical dataWorking space:Width: 600 mmHeight: 650 mmdepth: 800 mmExternal dimensions:Length: 1200 mmWidth: 900 mmHeight: 2000 mm

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mmStroke volume: 154 cm³Injection weight in polystyrene: 141 g/hpInjection pressure: 2,177 barClamping force: 120 ttie-barlessTool installation height min.: 300 mmOpening distance: 500 mmCONTROL: CC200Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage beltPump drive power: 15kWTotal connected load: 24.2 kWTotal weight: 7,300 kgDimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Paymentterms: 100 % before taking over the machine, net only

Key data: 450 mm, 63 , 25

Screw diameter: 25 mmDisplacement: 69 cm³Injection weight in polystyrene: 63 g/hpInjection pressure: 2,400 barClamping force: 45 ttie-barlessTool installation height min.: 175 mmOpening distance: 355 mmCONTROL: CC200Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kWTotal connected load: 17.8 kWTotal weight: 3,300 kgDimensions L x W x H: 3.3 x 1.2 x 2.0 m m mPayment terms: 100% before taking over the machine, net only

Key data: 2500 kN, 618 g/PS, 60 mm

Krauss Maffei 250-1400CX Injection Molding Machine with Robot and Gas Boost (225) Item number: 225 Availability: In stock Year of Make: 2016 Brand: KRAUSS MAFFEI Specifications Injection weight: 618 g Injection flow: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Spray pressure: 2005 bar Tiebar spacing: 630x630 mm Clamping plate size: 1135x1180 mm Tool installation height min.: 330 mm Plate spacing max: 1150 mm Control: MC6 Language: German Power: 70 kW Hours: 23170 h Weight: 15000 kg Dimensions: 6.5x2.3x2.3 m Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes Heating Ducts: Yes Gas storage: Yes

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

Ref. no.: 18142Hersteller: DEMAGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 400 mmDistance between tie bars: 355 x 355 mmMould height min.: 210 mmPlaten size (h x v): 540 x 540 mmInjection unitScrew diameter: 35 mmInjection volume: 106 cm³Shot weight: 95 gInjection pressure: 2573 barMeasurements and weightDimensions: 3,65 x 1,15 x 1,18 mMachine weight: 3600-2500 kg

Ref. no.: 16369Hersteller: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kgFurther information:BATTENFELD EM 75/120 UNILOG B4All-Electric Precision Injection Moulding MachineThe BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.All major machine movements are driven by modern servo motors, providing: very low energy consumption hi ...

Key data: 3500 , 1212 , 70

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

Used machine in good condition. Available for immediate delivery.

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg

Including YUSHIN 5 axis servo robot - 21.5 HD Touch screen display - 23 languages - selectable - 10 stages of injection pressure & speed control - 6 stages of closing & 5 stages of opening via speed & position control - auto acceleration control - 10 stages of ejector control, 2 stage ejector and 4 patterns of ejector motion control - Simultaneous Ejector forward with clamp opening - Simultaneous clamp open and plasticising - Screw diameter: 20 mm - Injection volume: 24 cm? - Platen size h: 500 mm - Platen size v: 470 mm - Distance between tie-bars (h x v): 360 x 320 mm - Ejector force: 5 / 20 (2.0tonf) / 70 kN - Power: installed max: 15.7 kW - Operating hours: 10.600 - Weight: 2.900 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Clamping force: 600 kN - Mould height max: 190 mm - Platen size (h x v): 910 x 400 mm - Control: CC220

Used machine in good condition. Available for immediate delivery. - Screw diameter: 50 mm - Clamping force: 1.600 kN - Shot weight max: 297 g - Injection pressure: 2.080 bar - Injection volume: 353 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 225 / 66 mm / kN - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Daylight between platens max: 900 mm - Platen size (h x v): 685 x 685 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: n/a - Power: installed max: ? 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 5.000 x 1.615 x 2.110 mm

with Robot WITTMANN W713-0114 - Screw diameter: 55 mm - Clamping force: 200 kN - Injection volume: 427 cm? - Mould opening stroke max: 650 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 520 x 520 mm - Operating hours: 24.453 - Power: installed max: 15 + 30 kW - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg - Weight: 6.630 kg

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 97 g - Injection volume: 106 cm? - Clamping force: 500 kN - Daylight between platens max: 550 mm - Platen size (h x v): 446 x 446 mm - Distance between tie-bars (h x v): 320 x 320 mm - Power: installed max: 21,5 kW - Dimensions (long x wide x high): 3.410 x 1.475 x 1.990 mm - Weight: 2.330 kg

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany