injection moulding machines used for sale (808)

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Key data: 1100 , 40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012

Key data: 3200 , 700 , 60

Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

clamping force: 1300 kNinjection volume: -- cm³screw diameter: 45 mmplaten size: 470 x 470 mmCondition: used,Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350Injection unit:- Screw diameter: 45 mm- Centring ring diameter: 125 mm- Shot weight max.: 210 g (PS)- Injection pressure: 1,840 barClamping unit:- Clamping force: 1300 kN- Opening stroke max.: 850 mm- Mould installation height: min. 275 mm- Mould mounting platens: 470 x 470 mm- Operating hours approx.: 91,000 - Core pulls: 1x- Valve gate: 1x pneumatic- Hot runner control points: 12x- Temperature control unit interfaces: 6x (20 mA)- Conveyor belt in the machine- Selector unit. available- Release for high temperature up to 450°C- Communication card for ProSeS interface available- Robot  ...

Key data: 1500 kN, 141 g/PS, 35 mm

Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e

Key data: 1500 kN, 487 g/PS

Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No

Key data: 1300 kN, 40 mm

Stock No.: 503267 Manufacturer: KRAUSS MAFFEI Type: KM 130-380 CX Control: MC5 Year of construction: 2007 Hours: 48294 h Clamping force: 1300 kN Holm dimension v: 525 mm Holm h: 525 mm Plate size h: 820 mm Plate size v: 845 mm Min. installation height: 300 mm Plate dread max.: 900 mm Aperture travel: 600 mm Screw diameter: 40 mm Displacement: 201 ccm Spray pressure: 1860 bar Machine dimensions LxWxH: 5.7m x 1.6m x 2.1m Total Weight: 7800KG Equipment On-screen text German CEE socket 16A Core hoist hydraulic 2x Air valve 1x Air valve 2x Machine with water battery Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Interface for coloring device Selection Unit

Wittman-Battenfeld injection machines 2 units 110tons and one 180t -BTT110 - BT110 - BT180

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B

2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production

Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

clamping force: 1.000 kNinjection volume: 203 cm³screw diameter: 40 mmplaten size: 580 x 652 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 40 mm- injection volume: 230 cm³- weight: 205 gClamping unit:- Clamping force: 1000 kN- Centring: 125 mm- Platen size: 580 x 652 mm- Mould size: 400 x 400 mm- Mould thickness min.: 250 mm- Mould thickness max.: 450 mm- 1x core pull- Voltage: 3x 400V, 50Hz, N, PE- Total power: 25 kW- Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm- Weight approx.: 4,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate conveying on our homepage.The data for this ad was created with ModulMWS - the software solution ...

clamping force: 6500 kNinjection volume: 2011 / 323 cm³screw diameter: 80 / 45 mmplaten size: 1450 x 1350 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1:- Screw diameter: 80 mm- injection volume: 2.011 cm³- weight: 1810 ginjection unit 2:- Screw diameter: 45 mm- injection volume: 323 cm³- weight: 290 gClamping unit:- Clamping force: 6500 kN- Centring: 200 mm- Platen size: 1450 x 1350 mm- Mould size: 1000 x 910 mm- Mould thickness min.: 450 mm- Mould thickness max.: 950 mm- 2x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 245 kW- Dimensions L/W/H: approx. 10,100 x 5 ...

clamping force: 800 kNinjection volume: 106 / 42 cm³screw diameter: 30 / 22 mmplaten size: 600 x 600 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 30 mm- injection volume: 106 cm³- weight: 94 ginjection unit 2:- Screw diameter: 22 mm- injection volume: 42 cm³- weight: 37 gClamping unit:- Clamping force: 800 kN- Centring: 125 mm- Platen size: 600 x 600 mm- Mould size: 420 x 420 mm- Mould thickness min.: 250 mm- Mould thickness max.: 590 mm- Voltage: 3x 400V, 50Hz, N, PE- Total power: 42 kW- Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm- Weight approx.: 5,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate ...

Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...