machines and plants for process engineering used for sale (7,641)

General SKU274U478 LocationBarneveld CEcheck MakeVib Tech GmbH TypeSO 406/2020-UA Main Features MaterialStainless steel Length2350 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter400mm Feeder length2350mm Closedcheck InletDia:250mm OutletDia: 175mm With vibro motorcheck With motor0,6kW,230/400Volt, 955rpm(EX) Without controlscheck MaterialStainless steel 1.4306 (304L) With jacketcheck General No.1101002-01 Year of construction09-2010 Mounted on framecheck Floorspace2,55x1,15m Total height1,2m Weight540kg ATEX designedcheck Extra Specificationsthis vibrating feeder is equipped with CIP cleaningConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherOther pharmaceuticsSugarAnimal feedSolid phar ...

Type AL 200 SD, inlet/outlet 200 mm, housing full stainless steel 1.4408 - flange connection DIN PN 10, Rotor volume 10.5 liters, direct heat SEW 0.55 KW, discharge speed 20 rpm

Used double shaft paddle mixer made by Nowicki. Total capacity: 3500 liters. Stainless steel. Dimensions: 3600 mm x 1300 mm x 1700 mm.

Stock# U2475 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel.

Noggerath NSI B 300-S/3 Rake. Fully functional Areas of application & function: Faecal collection points: The main application is the reception and screening of faecal sludge to remove coarse solids. Industrial wastewater: Can also be used for sludge screening of industrial wastewater. Automatic operation: An integrated level measurement system controls the drive of the spiral so that it only runs when needed. Compact design: The NSI-B model is designed as an encapsulated stainless steel unit that is integrated directly into a container. Dewatering: The screenings are dewatered and compacted in a press zone, which reduces the volume and makes it easier to dispose of. Cleaning: A special spiral cleans the screen surface during operation.

General SKU336X761 LocationBarneveld CEcheck MakeBusch Pressure Working pressure0.0005 Bar Main Features MaterialMild steel/Stainless steel Volume650000 Ltr. Motor12.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity650 m3/h With motor12,5 kW, 400/690 volt, 2935 rpm Inletdia. 90 mm Outletdia. 90 mm MaterialMild steel, Stainless steel General TypeCobra NX0650 A LZ1 Mach.No.CHM 121160... Year of construction2021 Mounted on framecheck Floorspace1,70x0,95 m Total height0,85 m Weight700 kg Extra SpecificationsSuction cap. 650 m3/h, water cooling, with filter&:nbsp:&:nbsp:&:nbsp:&:nbsp:Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsVacuum pumpsPaper & otherSolve ...

A new oil-lubricated rotary vane vacuum pump Busch in the original packaging is available. Suction capacity: 360m³/h, ultimate pressure: 0.5hPa, motor power: 10kW, speed: 1800rpm, oil fill quantity: 6.5l. Machine dimensions X/Y/Z: approx. 1100mm/600mm/450mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

General SKU252X215 LocationBarneveld CEcheck MakePharmatec TypeRet P15680 Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface±5m² Tube capacity67 l. U-typecheck Number of tubes:43 Tube diameter10 mm Tube length2000 mm Max. temperature200°C Shell capacity22 l. Shell diameter250 mm Shell length2100 mm Max. temperature200°C Shell connectionscheck MaterialStainless steel With jacketcheck General No.12 1675 01 Year of construction2012 Floorspace0,75x0,75 m Total height2,2 m Weight240 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgroc ...

General SKU350W923 MakeStephan TypeUMB40 No.25706A Year of construction1976 LocationBarneveld Main Features MaterialStainless steel Volume40 Ltr. Motor5.5 KW Specified Features - Cutter Cuttercheck Capacity40 l. Diameter500 mm Depth250 mm Knife diameter300 mm Number of knife blades2 Outlet100 mm Can be tiltedcheck Motor5,5 kW, 380 volt, 2870/1420 rpm Speed1420/2870 rpm MaterialStainless steel (Sandvik 1200SA) General Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,70 m Total height1,10 m Extra SpecificationsThe vessel is made of stainless steel.&:nbsp:&:nbsp:The blades and lid are made of aluminum.&:nbsp:&:nbsp:Consumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberStephanIndustries > Recycling > Consumer was ...

General SKU430U1380 MakeHOF Sonderanlagenbau GmbH LocationBarneveld CEcheck Main Features MaterialStainless steel Surface0.74 m2 Specified Features - Freeze dryer Freeze dryervacuum dryer Cooling surface0,74 m² Number of plates6 Plate sizes620x320 mm Between the plates120 mm With cooling compressorcheck Cooling mediumR404a MaterialStainless steel 1.4571 (316Ti) General No.GT-26049 Year of construction2007 With switchgearcheck Floorspace2,7x1 m Total height2 m Weight2400 Extra SpecificationsVolume of the drying chamber: 340 LPressure range of the drying chamber: -1 / +0.01 barThe freeze dryer is equipped with a vacuum pump:Brand: PfeifferType: DUO 20MVolume: max 24m³/hPowdered foodsGeneric medicinesFine chemicalsBiotechnologyFeed additivesCosmeticsFreeze dryersFood additivesSolid pharmaceuticsBiopharmaceuticalAPIHof Vakuum- und KaltetechnikIndustries > Food & Fe ...

Stock# U2474 Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central dis ...

Machine name: Filter press used Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year of Make: 2017 Design: Side-spar press Press capacity: 470 liters Procedure: Open Filter area: 41.7 m2 Plate format: 800 x 800 mm Number of plates: 41 Panel material: Polypropylene Plate Conveyor: Automatic Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Curb weight: 4830 kg Tech. Documentation: Yes Remark: It has been used in electroplating. Accessories: A control cabinet, a control cabinet, a hydraulic system, piston pump, drip plates. Condition: Used Price: On request

Used rotor unit without frame and motors (spare rotor) Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Stated price of 8000,-€ in unrepaired condition, 15.500,-€ net in overhauled condition ---------------------------------------------------------------------- ----------------------------------- used rotor unit without frame and motors (spare rotating) Rotating speed: 3500 rpm Bowl inner diameter: 448 mm Bowl wall thickness: 11 mm Material: Steel Max. density: 1.50 kg / dm³ stated price of 8000,-€ in unrepaired condition, 15500,-€ in repaired condition

Used Centrifuge Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Total weight: 4300 kg Stated price of 10,500 € in unrepaired condition, 24,500 € net in overhauled condition

Homogenizing Mixer CML125 Key data: • SYMEX CML125 • Working volume: 125 • Armature agitator with scrapers and breakers 19 ... 82 min-1 • Homogenizer with right/left run (homogenizing/pumping mode) 5 - 21 m/s • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.

Vakumix continuous homogenizer in the design and mobile on castors. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 kW: 30 Suction device DN25 front side for sucking in liquids. NEW: Control, converter, all seals incl. mechanical seal. The continuous homogenizer is PLC controlled. Delivery time approx. 4 weeks.

Dissolver ATP Dispermill LD 50 Explosion-proof design Power 0.37 kW Speed range 930-8400 1/min Toothed pulley 50 mm Very good condition, straight from the production

Dissolver Pendraulik Disperlux LD 50 Explosion-proof design Power 0.37 kW Speed range 930-9400 1/min Toothed pulley 50 mm

Stock number: R1249, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator type: 3-bladed propeller, Agitator placement: From the top, Propeller size: D 125 mm., Shaft lenght: 790 mm., Shaft diameter: 25 mm., Motor: 1,1 kW - 230/400 Volt - 1440 rpm., Outer diameter lid: D 500 mm., Dimensions total: H 1310 mm., Other: Mounted in lid with lifting yoke

Stock number: R1247, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator type: 3-bladed propeller, Agitator placement: From the top, Propeller size: D 125 mm., Shaft lenght: 750 mm., Shaft diameter: 30 mm., Outer diameter lid: D 500 mm., Dimensions total: H 1270 mm., Other: Mounted in lid with lifting yoke

Stock number: R1248, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator type: 3-bladed propeller, Agitator placement: From the top, Propeller size: D 170 mm., Shaft lenght: 790 mm., Shaft diameter: 25 mm., Motor: 1,1 kW - 230/380 Volt - 1440 rpm., Outer diameter lid: D 710 mm., Dimensions total: H 1490 mm., Other: Mounted in lid with lifting yoke

Stock number: R1250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator type: 3-bladed propeller, Agitator placement: From the top, Propeller size: D 125 mm., Shaft lenght: 570 mm., Shaft diameter: 25 mm., Motor: 0,55 kW - 230/400 Volt - 1435 rpm., Outer diameter lid: D 500 mm., Dimensions total: H 1090 mm., Other: Mounted in lid with lifting yoke

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

Bead mill VMA Getzmann Dispermat SL50-C Power 3 kW Speed range 0-6000 1/min Grinding chamber volume 0.5 l Bar temperature sensor Very good condition, straight from production

Dissolver Drais RSV 19.1 Power 14.5 kW Speed range 0-1850 1/min Complete with control cabinet Very good ready-to-use condition, straight from production