machines and plants for process engineering used for sale (7,418)

Pump with substructure and drive Flow rate min. 10 m³/h max. 70 m³/h Differential pressure min. 4.9 bar max. 0.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Stator Bolt Material: Galvanized Steel Geared Motor North, Type SK52-160LP/4-F(VL) TF F

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

ID3599 Aquachem Automatic filter machine / Filterautomat AF 800 year/Baujahr 2020 Automatic filter machine, Filter volume: 154 dm3, filter area: 9.9 m2, filter plate format: 800 x 800 mm, number of chambers: 10, cake thickness: 32 mm, plate type: sealed chamber and membrane plates, feeding: up to 8 bar via the external inlet at the top, membrane repressing: pneumatic repressing system with internal air distribution and ramp-controlled pressure build-up (max. 15 bar), cake emptying system: AIRDIS cake emptying system and vibrating cylinder integrated in the filter plate handle, press locking: automatic, self-regulating electric/pneumatic/hydraulic locking system, drive: 0.75 kW, 400 V, 50 Hz, with control system, with connection and drain distributor, feeding unit (peristaltic pump), rinsing station, only in use for 1 year Automatic filter, filter volume: 154 dm3, filter area: 9.9 m2 ...

A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

Manufacturer: EXTRAKTLAB Model: e 140 Condition: Refurbished (2021) Processes up to 8 kg of input material per hour depending on process conditions. Extraction vessels: 2 x 20 L Collection vessels: 3 x 2.5 L Recycler vessels: 1 x 20 L CO2 Pump Flow Rates Range (LPM): 1.5 to 2 LPM Max Operating Pressure (psi): 5000 psi, 344.74 bar Maximum Process Temperature: 90°C Skid Operating Temperature (C°): 5 to 40°C (15 to 30°C optimal) CO2 Solvent Inlet Lines: 1 Eluent Inlet Lines: up to 2 User Interface: Touch Screen HMI panel with barcode scanner, maintenance tracking, recipe storage (parameter). 21 CFR Part 11 compliant software. Biomass Loading and Unloading: 10 micron flexible no channel bags Operating Humidity: 20 to 80% Compliance – UL 508A electrical panel Electrical – 50 Hz 208V-240V, 3 phase, Footprint:- 24ft. Dimensions – 99″ x 34″ x 72″ (LxWxH) Constru ...

Manufacturer: PRO-WAM Type of Machine : Process tank 450 L Year of Manufacture: 2019 Volume: 450 liters Tank used several times, like new, in very good condition, on wheels. Pressure up to 2 bar, with mixer and heating jacket, made of AISI 316Ti acid-resistant steel. Additionally, two UV light radiators were designed for the tank, mounted from the top through sight glasses. Process tank 450 l - vertical tank - pressure tank up to 2 bar - main tank made of AISI 316Ti acid-resistant steel - tank insulated with mineral wool, thickness 50 mm in the cylindrical part and on the lower head - outer jacket made of AISI 316Ti acid-resistant steel, thickness: 2mm - lower and upper cap pressed DIN 28011 - heating jacket with a capacity of 6 L - temperature in the tank and jacket 100 degrees. c - circulation pump - heating medium temperature sensor - expansion vessel of the heating system - el ...

We are offering for sale a complete XPS foam sheet extrusion and coating line, consisting of the following equipment: 1. Davis-Standard Extruder System Model 1: 100MM35 - HP Capacity: 257 HP - KW Capacity: 192 kW - Gear Ratio: 17.39 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 408,300 lb / 185,204 kg - Oil Fill: 23 liters (6 US gal), ISO VG 150 Model 2: 130MM45T - HP Capacity: 400 HP - KW Capacity: 298 kW - Gear Ratio: 17.49 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 690,000 lb / 313,000 kg - Oil Fill: 45 liters (12 US gal), ISO VG 150 S-Wrap Unit - Model: S-WRAP - Mfr Date: 08-2007 2. LEWA High-Pressure Metering Pump (x1) - Designed for Isobutane - Adjustable stroke head for low % addition - Triple heads LDD3 LEWA diaphragm metering pump - Digital flow meter for injection rate (kg/hr) - Pressure indicators at pump inlet & outlet 3. Dosing  ...

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: URT Type of Machine : Assembly Table Year of Manufacture: 2018 Certification: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacture: URT Year of Manufacture: 2018 Model: Testing Station Steering Wheel AMG Certification: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: URT Model: Steering Wheel Test Station AMG Year of Manufacture: 2019 Electrical Connection: 230V, 50Hz, 20A, 1/N/PE (EU) Pneumatic Pressure: 5 bar Weight: 800 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer:HORO Model:2736.AL-BCL Year of Manufacture: 2013 Type of Machine : drying oven Max Operating Temperature: 120°C Voltage: 3N~400 PE Frequency: 50 Hz Current: 18.1 A Power: 12.5 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar More items - new and used - can be found in our shop! International shipping costs on request!

Venti Oelde High Performance Centrifugal Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High Performance Centrifugal Fan V: 2559 m³/h 12 bar t: 300 C P: 0.608 kg/m³ Pw: 0.9 kW NV: 2840 1/min Weight: 180 kg Year of Make: 2017 More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: TOOL-TEMP Model: TT-28000 DG Type of Machine: Temperature Control System Voltage (Volt): 3-phase, 380–415 V Power (Watt): 3 × 9000 W Frequency (Hz): 50 Hz Refrigerant Gas (Gas): R-134a Refrigerant Quantity: 10 kg I have to guess the year it was built—around 2013. Find more here - .ucymachines/ Contact us at - sales@ucymachines

A MWT reverse osmosis system is available. Capacity: approx. 800l/h. On-site inspection is possible.

Used decanter made by Alfa Laval, model: Aldec 800.

Used decanter made by Alfa Laval, model: NX 4850.

- approx. 17m² filter area - Compressed air cleaning of the filter bags - 40 hoses (each 900 mm long, 150 mm diameter)

Planetary roller extruder, used Type : PWE 120 Manufacturer : Entex

A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.