machines and plants for process engineering used for sale (7,644)

Mixer

Mixing and homogenizing plant 300L, incl. heating and cooling, as good as new, never been in operation

Mixing and homogenizing plant 60L

Production of candies

Extraction plant

Draging drum for dragees

Laboratory Mixer 25L

Complete line for coating dragees

Mobile mixing and homogenizing plant capacity 334L

Drive : 12 KW

Manufacturer : Pallmann Grinding disc diameter : 1200 mm

rpm : 6.300 Weight : 220 kg.

Powder mixer, price for both EURO 15,000,--

Mixing and homogenizing plant 300L

Agitator 0.37 KW with aluminium propeller 300 mm Electric motor: Electric motor 0.37 KW, 3 x 230/400 volts, n = 1400 rpm, Weight approx. 15 kg. Wave: Precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material: Stainless steel 1.4301. Stirring organ: Used double-bladed aluminum propeller d = 300 mm.

Gardner Denver S-VSI 100 Vacuum Pump Dry-running, non-contact screw vacuum pumps Easy maintenance. Suitable for industrial applications such as vacuum forming, metallurgy and surface treatment. High efficiency due to stepped screw profile. Specifications: Pumping speed m3/h max. 100 at 50 Hz // 138 at 60 Hz Final pressure mbar (abs.) 0.1 Rated voltage 50 Hz/ 60 Hz: 230/400V ± 10% / 220/380V Motor power 50 Hz/ 60 Hz: 3 / 3.6 kW Current consumption 50 Hz/ 60 Hz: 10.5 / 6.0 Speed min 50 Hz / 60 Hz: 2880 / 3550 Weight : 190 kg Cooling water consumption: 1.8 l/min Operating hours: Between 321 - 14613 h Approximately 80% of the pumps are equipped with less than 4,000 operating hours Since we have about 40 of these pumps, we ship them randomly. 1x Gardner Denver S-VSI 100 vacuum pump More items - new and used - can be found in our shop! International shipping c ...

For sale is a used progressing cavity pump from the renowned manufacturer NETZSCH, model Nemo NM076BY03S18B. The pump is ideal for demanding conveying tasks in industry and is immediately ready for use. Specifications: Manufacturer: NETZSCH Pumpen & Systeme GmbH Type: NM076BY03S18B Type: Progressing cavity pump with substructure and drive Flow rate: min. 4 m³/h max. 35 m³/h Differential pressure: min. 14.9 bar max. 3.9 bar Joint Type: Bolt Joint Joint seal material: EPDM/1.4401 Joint Lubrication: Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Geared Motor North, Type SK52-180MP/4 -F(VL) TF Price on request Location: 23775 Großenbrode, Germany

Kahl Flat Die Press

Progressing cavity pump with substructure and drive Flow rate min. 4 m³/h max. 35 m³/h Differential pressure min. 14.9 bar max. 3.9 bar Joint Type: Bolt Joint Joint seal material: EPDM/1.4401 Joint Lubrication: Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Geared Motor North, Type SK52-180MP/4 -F(VL) TF

Filter Cloth for Chamber Filter Press Length plate format in mm: 2000 Width flap format in mm: 1500 Cloth Design: Through-Hole Cloth with Velcro Hem in mm: 30

Through-hole filter cloths for chamber filter press Length plate format in mm: 2000 Width flap format in mm: 1500 Cloth Design: Through-Hole Cloth Hem in mm: 30

Machine name: Filter presses frame used Manufacturer: Passavant Type: 1200 x 1200 mm Year of Make: 1991 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Possible approx. 2200 liters m2 Procedure: Closed Filter area: Possible approx. 160 m2 Plate format: For 1200 x 1200 mm Number of plates: Without plates but suitable 66 with 30mm cake thickness Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 possible Dimensions: L 6,700 x W 1,800 (2,400) x H 2,250 + 500 mm Curb weight: Approx. 14000 kg Tech. Documentation: Yes Note: Without plates but with 66 carriages for hanging the filter plates Accessories: A light barrier and a filter cloth washer Condition: Used Price: On request

Pump with substructure and drive Flow rate min. 10 m³/h max. 70 m³/h Differential pressure min. 4.9 bar max. 0.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Stator Bolt Material: Galvanized Steel Geared Motor North, Type SK52-160LP/4-F(VL) TF F

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

ID3599 Aquachem Automatic filter machine / Filterautomat AF 800 year/Baujahr 2020 Automatic filter machine, Filter volume: 154 dm3, filter area: 9.9 m2, filter plate format: 800 x 800 mm, number of chambers: 10, cake thickness: 32 mm, plate type: sealed chamber and membrane plates, feeding: up to 8 bar via the external inlet at the top, membrane repressing: pneumatic repressing system with internal air distribution and ramp-controlled pressure build-up (max. 15 bar), cake emptying system: AIRDIS cake emptying system and vibrating cylinder integrated in the filter plate handle, press locking: automatic, self-regulating electric/pneumatic/hydraulic locking system, drive: 0.75 kW, 400 V, 50 Hz, with control system, with connection and drain distributor, feeding unit (peristaltic pump), rinsing station, only in use for 1 year Automatic filter, filter volume: 154 dm3, filter area: 9.9 m2 ...

A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.