machines and plants for process engineering used for sale (7,554)

The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.

Used hermetic, self-cleaning centrifuge made by REDA, model: RE150T, capacity: 15.000 liters / hour, new: 1998 Centrifuge serviced. Last service on February 16, 2022.

Used self-cleaning disc centrifuge made by Alfa Laval, type: MRPX 314. Capacity: 15.000 liters / hour.

Dissolver Agitator Vollrath EWVWSV-7 Explosion-proof design Power 4.6 kW with stirring rod Speed range 300-1200 1/min mobile, mobile on castors Very good condition, straight from production

Stirring tank REITZ RB300LRW037250 Stainless steel tank 300 liters with agitator 0.37 KW, used gear motor KEB 30 rpm. Stainless steel stirring tank 300 liters with outlet tap 3/4-inch. Diameter 630 mm, container height 990 mm. Tripod height 425 mm. Gear motor: Used gear motor KEB, 3 x 230/400 volts, 0.37 kW, n1 = 1350 rpm, n2 = approx. 30 rpm. With motor protection switch. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301. With rigid coupling 28/20 in stainless steel 1.4571. Stirring organ: Four-bladed inclined blade stirrer, diameter 275 mm, material stainless steel 1.4571. Very slow-running, high-torque agitator.

Used, copper coating pan made by Spomasz Pleszew, model: CBA-2. Capacity: 100 liters, load: approx. 60 kg.

Used copper coating pan manufactured by Spomasz Pleszew with a tilting drum. Capacity: 100 liters, input: about 60 kg. After general renovation.

Promag 50 50H50-10W1/0 DN50 stock: 1629 Promag 50 50H50-10W1/0 DN50 stock: 1621 Promag 50 50H50-4L13/101 DN50 stock :1622 Promag 50 50H50-72V3/125 DN50 stock:1630-1 SOLD All I-out (HART), F-out All tested and in good working condition!

Endress + Hauser Promah H 300 5H3B50-L162/0 ser nr. RC088519000 PROFINET DN50

Krohne Promass 7000 T50 - DN50 - Straight pipe - Full bore - Separate control panel - YOM 2013 - SN: G130000001602881 The flowmeter is tested and in good working condition.

Belt spiral mixer for powder and granules with hydraulic mast - 950mm diameter - Pneumatic outlet flap - approx. 120 litres filling volume - made of stainless steel - Drive power: 2.2 kW - 52 shaft revolutions per minute - Adjustable shaft speed - With hydraulic mast (0.55 kW)

Max solid density 1.2 kg/dm3 Max bowl speed 5300 rpm Min feed temperature 0 °C Max feed temperature 100 °C Bowl diameter 200 mm

Stainless Steel Continuous Mixer Manufacturer : MWM Type: 400 V-K Content: 400 litres Technical specifications : Machines No. 650 Continuous Mixer with Inclined Bucket Mixing Tool and Chopper Dimensions: length 3.00 m, height 1.00 m + 1.10 frame, width 1.30 m Engine: Power 15 kW, 1,460 /94 rpm Mixing shaft 94 rpm

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

Mobile 290L vessel incl. discharge with valve, inspection glass, etc.

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - / Contact us at -

Manufacturer: CIMA Model: RP9HT Year of Manufacture: 2018 Type of Machine: Hot Cure Tire Press Max Air Pressure: 20 bar Mold Size Compatibility: Up to 30.5" Operation: Hydraulic cylinder for open and close Control System: Allen-Bradley PLC Steam-Traps: 4 units Heating: Steam Weight: 28 tons Accessories: Several kinds of molds Tire Size Fitment: Compatible with tire sizes 26.5R25 and 29.5R25 Find more here - / Contact us at -

Manufacturer: CIMA Model: CI Master 1800 Year of Manufacture: 2019 Type of Machine: Extruder Builder Extruder Size: 90mm Pin Extruder (suitable for tire sizes from 17.5R25 to 26.5R25) Configuration: Cold feed extruder with barrel Control System: Allen-Bradley PLC equipped Cooling System: 4x zone temperature-controlled cooler (Hot/Cold) Power Supply: 380V Air Requirement: 8 bar input Expandable Rim Options: 25”, 22.5”, and 20.5” sizes Condition: Brand New Useful for building TBR and OTR tire sizes Find more here - / Contact us at -

Manufacturer: Brunotte & Niemeyer Year of Manufacture: 1968 Type of Machine : Hot cure tire press - Open/close system with hydraulic spindle - Plc cabinet - Press on it self can load tyres by own boards - Air max: 16bar pressure inside - Standard working pressure 8 bar - Hydraulic pump - Heating: Steam - Accessories: optional 24R20.5 XS mould Find more here - / Contact us at -

Manufacturer: Paladini Model: P1750 Type of Machine: Hot Cure Tire Press Equipped with Steam/Air System for versatile operational needs Powered by 380V/220V electrical supply Integrated Hydraulic Pump for efficient performance Condition: machine is working well Self-Loading System via onboard crane, allowing easy and independent handling Find more here - / Contact us at -

This machine integrates track building, peeling, and brushing functions - Hydraulic lifter - Electric Control Panel – Operates on 380V / 220V - Hand brusher (Yellow) Find more here - / Contact us at -

Metal sorting system for small scrap and bulk materials, metal recycling, ash recycling used Manufacturer: GEODUR with eddy current separator for non-ferrous metals Dimensions: approx. 10 x 2.5 x 3 m This is a larger semi-mobile sorting plant Formerly used to process ash, bottom ash / slag from waste heating plants / incinerators / smelting plants by means of this sorting plant in order to separate metals and other fractions from it Can also be used to sort / separate sand and stones. Metals were sorted by means of Überbangamnet. Non-ferrous metals by means of non-ferrous separators / eddy current separators This line also includes other plant components, overbelt magnet, sieve sorting machine and conveyor belts with steel structures We are in the process of setting up the line in such a way that you can see the entire circumference compared to this plant Search  ...

Britsh Rema Classifier Mill

British Rema classifier mill already dismantled.