machines and plants for process engineering used for sale (7,554)

Heraeus Vötsch HC 4055 Temperature Test Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Temperature cabinet Temp. range: + 180°C Rated voltage: 380V, +-10%, 3/N,50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: width x height 350 x 640 mm Test chamber: (L x D x H) approx. 800 x 795 x 855 mm Test room volume 550 l Cabinet is air-cooled Attention Cabinet can only be operated as an oven. Refrigeration circuit empty and shut down. Air conditioning system shut down. Disconnected contactors: 03K2 Compressor 03K5 Kond. Fan 15K6 Panel Heater Solid State Relay 21V4 Humidifier. Weight approx. 550 kg More items - new and used - can be found in our shop! International shipping costs on request!

Vötsch VT 7030 S2 Thermal Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a familiar environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a wide range of environmental conditions for scientific studies, product testing, and process controls. Data for temperature tests in single-chamber operation Hot Chamber: Thermal shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Thermal shock te ...

Vötsch VSKZ 04/120/S Walk-in climatic test chamber Manufacturer: Vötsch Type: VSKZ 04/120/S Temp. range: -40°C to +120°C Mains voltage: 400V Rated Current: 95A Nominal power: 56 kW Refrigerant VK: R 404 A Year of Make: 1996 Outer dimensions: W 2850 x D 4100 x H 3080 mm SO-01 More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - / Contact us at -

We are offering for sale 2 Units of Rauch MDO650 with Dosing Pipe System and Mass Preheating Station ( mass feeding via robot is not included) : Unit 1 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: Mass preheating station MVE 750 E - Year of Manufacture: 2015 Unit 2 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: - Mass preheating station - Year of Manufacture: 2015 Find more here - / Contact us at -

Manufacturer: Rauch Model: MDO1000 E with dosing pipe system and ingot preheating station Year of Manfucture: 2018 Ingot preheating station - Year of manufacture: 2014 Specifications: - Melting capacity: 1,000 kg/h - Holding capacity: 2,950 kg Find more here - / Contact us at -

Max weight 3800kg Main drive 37 kw

Manufacturer: Kohnle Model: Hardening System Year of Manufacture: 1995 Voltage: 400/230 V Frequency: 50 Hz Current: 220 A Power: 100 kW Find more here - / Contact us at -

The foaming cabin from the manufacturer Cannon is designed for industrial use in foaming processes for steering wheels in the automotive industry. The foaming cabin is composed of a total of 5 steering wheel foaming cabins, the difference between them being that each cabin can be a different color for steering wheel foaming. Other auxiliary equipment that are part of the foaming cabin system: -tempering oven type UF 450 PLUS -installation material preparation -individual material preparation installation for each cabin depending on the color of the steering wheel Manufacturer: CANNON Model: A-Compact 40FC Year of Manufacture: 2017 Type of Machine: Foaming Cabin Air Pressure IN: 6/8 bar Control Unit: Control panel PLC Usable Materials: Isocyanate, Polyol Maximum Absorbed Power: 10.1 kW Acoustic Pressure: 81 dBA Find more here - / Contact us at -

Power: 9 kW Volume: 6.43 m3 Pressure: 0.6 bar Price for a complete blower

Quenching of the Batch The batch is quenched by immersion in a quenching medium (oil). --------------------------------------------------------------- Dimensions and Weights Overall Dimensions (including control system): - Width: approx. 3400 mm - Height: approx. 5600 mm - of which recessed in the pit: 650 mm - Length: approx. 5500 mm - Minimum required hall height: 7000 mm - Working height above floor level: 1200 mm --------------------------------------------------------------- Base Grate Dimensions: - Width: 705 mm - Height: 50 mm - Length: 1100 mm --------------------------------------------------------------- Usable Batch Space (including base grate): - Width: 700 mm - Height: 950 mm - Length: 1100 mm - Grate loading height: 900 mm - Gross batch weight (incl. base grate): 1000 kg --------------------------------------------------------------- Oil Bath: - Oil capacity: app ...

Manufacturer: NESTRO Model: NE 250 J Year of Manufacture: 2023 Type of Machine: Dust Extractor Operating hours: 551.3 h Technical Specifications - Rated Airflow Volume: 2,950 m³/h - Rated Negative Pressure: 2,526 Pa - Filter Area: 22.4 m² - Connection Diameter (Suction Port): 250 mm - Weight: 930 kg - Max. Compressed Air Pressure: 8 bar - Motor Power: 5.5 kW - Operating Voltage: 400 V - Rated Speed: 3,000 rpm - Rated Current: 9.5 A - Frequency: 50 Hz Find more here - / Contact us at -

Manufacturer: Stäubli Model: RX160 Year of Manufacture: 2018 Type of Machine: Operating Hours: 500 h Mass: 248 kg / 546 lb Nominal Payload: 20 kg / 44 lb Robot Arm Specifications: - Model: RX160 (Series 160) - Configuration: 6-axis - Mounting: Floor-mounted - Arm Length: Standard - Color: Standard RAL 1028 (Melon Yellow), textured paint, satin finish - Integrated: Two solenoid valves for compressed air - Lubrication: H1 Food Grade Oil - Mechanical limit on Axis 1 - Brake selector switch with 5 m cable to separate box Controller: - Model: CS8C - VAL3 Controller - Operating System: SRC Version 7.x - Version: Built-in (IP20) - Power Supply: MULTI 3x400V, 50/60 Hz - Cooling: Standard cooling with airflow from bottom to top Cabling & Connections: - 15 m robot connection cable, double pluggable (arm + controller) - Angled outlet plug on the arm (right side) - Side connection at t ...

Netzsch Omega 60 homogenisator with control cabinet. Rated flow: 60 liter/hour Maximum pressure: 700 bar.

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Second hand crushing mill. Hopper dimensions: - Length 1410 mm - Width 1650 mm - Height 2600 mm Technical features Model PC66120 Machine motor 90 kW (120 cv) - 1480 rpm Equipment configuration Electrical panels Hydraulic power pack Transport information Length 2700 mm Width 2600 mm Height 1800 mm Documentation Maintenance Manual Operation Manual Drawings Electrical Diagrams Condition As is Made by Tallants Navarro

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter and a hopper. Material 316/316L stainless steel Transport information Length 2300 mm Width 2000 mm Height 2000 mm Weight 1500 Kg Condition As is Made by Unknown

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

Nucha filter dryer manufactured by BONAZZI MARIO, model BM 12000, with a total volume of 18050 liters. Material To be determined Technical features Model BM 12000 Year of manufacture 2001 Condition As is Made by BONAZZI MARIO

Vertical thin layer evaporator with 1 m2 heating surface Features: Heating surface: 1 m2 Maximum jacket pressure: 7 bar Interior pressure: atmospheric or vacuum Engine Rpm: 1,500 (4 hp) Rotor Rpm: 1,100 Documentation: ATEX Certificate Volume Maximum flow rate L/h Material To be determined Transport information Length 3100 mm Width 950 mm Height 1250 mm Documentation ATEX certificate Condition As is Made by Unknown

Filter manufactured by TWIN FILTER, model HPF 18-D-14. Filter cloth diameter: 435 mm Number of cloths: 14 Material 316/316L stainless steel Technical features Model HPF 18-D-14 Year of manufacture 2012 Vessel working pressure 6 bar Vessel working temperature 90 ºC Half-coil/jacket working pressure 6 bar Half-coil/jacket working temperature 90 ºC Half-coil/jacket volume 3 L Total vessel volume 188 L Transport information Length 1000 mm Width 950 mm Height 2100 mm Filtration area Filtration area 2 m² Condition As is Made by TWIN FILTER

ATEX basket centrifuge manufactured by ROUSSELET ROBATEL in 2017, model RC20VXR. Material 316/316L stainless steel Technical features Model RC-20-VXR Year of manufacture 2017 Maximum load (density 1.25 kg/dm³) 2.5 Kg Useful load 2 L Machine motor 400V / 50Hz Maximum speed 3000 rpm Equipment configuration ATEX Feeding pipe Cake washing pipe ELECTRICAL PANELS Lamp Suspension: on inertia plate + silent blocks Dimensions Basket diameter 200 mm Transport information Length 2100 mm Width 1200 mm Height 2000 mm Condition Unused Made by ROUSSELET ROBATEL

Second-hand decanter made by FLOTTWEG, model Z53-4454. Maximum bowl speed: 3250 rpm Max. sediment removal rate: 1,3 kg/dm3 Min/max product temperature: 0/100ºC Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Documentation CE Certificate Maintenance Manual Operation Manual Drawings Spare parts list Condition Inspected Made by FLOTTWEG

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Volume Total capacity 20 L Material Borosilicate glass 3.3 Jacket or half-coil material To be determined Condition New Made by STEROGLASS

Kilolab reactor made of 3.3 borosilicate glass, with stirring and jacket, and a capacity of 50 liters. BODY Design pressure -1/0.5 mbar Design temperature -50/200ºC Temperature delta 80ºC Maximum vacuum 5 mbar Volume Total capacity 50 L Material Borosilicate glass 3.3 Jacket or half-coil material To be determined Technical features Vessel working pressure -1/0,5 bar Vessel working temperature -50/200 ºC Equipment configuration Agitator Jacketed Transport information Length 800 mm Width 1000 mm Height 2200 mm Condition New Made by Unknown