machines and plants for process engineering used for sale (7,558)

Used matrix with a capacity of 1000 litres, acid-resistant design. Mixed cream or gel masses. Blade agitator - optional propeller agitator.

Used matrix with a capacity of 300 litres, acid-resistant design. Mixed cream or gel masses. Motor power 0.4 kW. Weight 260 kg.

Used Stork Wolf model MRS-2500.

Used vacuum tumbler by Nowicki model MA-5-2000 PS. The device will be perfect for meat processing plant for massifying and tenderising meat. Model: MA - 5- 2000 PS Power: 4,1 KW Weight: 1190 kg Capacity: 2000 litres Intake: 1200 kg Bowl speed: 0 - 9 / minute Length: 2860 cm Width: 1335 cm Height: 1670 cm

Used automatic cutter-mixer-emulsifier by Karll Schnell type FD9. Without emulsifying motors.

Used stainless steel conical mixer for bulk materials type MR-05. New 2015. Capacity 3000 L Rotational speed of screw 320 rpm, Power 5,5 kW, Total weight 500 kg.

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container  ...

For sale is a pilot plant or small production plant for the production of composites (granulars) from fibrous materials, plant fibers or waste paper with clay flours. Description: A complete technological line consisting of the following machine components: 1. Two tall silos for storage 1,000.00 € 2. Twin shaft mixer 500,00 € 3. Shredder with upstream magnetic drum for the selection of magnetic metals – 20.000,00 € 4. Collagen press type Kahl 18.000,00 € 5. 2 conveyor belts for transfer to the mixing drum € 1,000.00 6. Kitzmann Mixing Drum 25.000,00 € 7. Conveyor belt – €500.00 8. Floor dryer including heating system € 12,000.00 9. Product discontinuation with cyclones 2,500.00 € 10. Electrical distribution and control cabinets 5.000,00 € Original new price of the entire system 465,000.00 € Recommended retail price Total price net 85.500,00 €  ...

Trowalizing machine Engine Type OUX 160M6 6.9 KW, 380 V, 1455 rpm, 15.2 A, 50 Hz Speed range 965 to 10455 rpm. Dimensions: H 1700 x W 1730 x D 1900 Weight: 1450 kg net

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: KD 613-G Year of Make: 1980 Degree of protection: IP 44 Speed: 455 rpm Operating voltage: 380 / 660 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 266 L/min. Dimensions: L 1900 x W 1000 x H 800 mm Curb weight: Approx. 1500 kg Condition: Used Price: On request

- Type: RS 10 (Rotoscreen) - Year of construction: 2003 - Consisting of a fixed and a movable slat grille - Material: stainless steel

We offer you a sand classifier / sand separator from MEVA. - Type: SKS 100 E - Year of construction: 2003 - Integrated ventilation

Manufacturer: ETSCHEID Content: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good

Edeleanu GmbH / Shell Lube Oil Hydrotreater 1 (LHT-1) (1972/2015) Year: 1972 Make: Edeleanu GmbH / Shell Hydrotreating to produce lubricating-manufacturing oils, sulfur-free, few aromatics, light color, color stability (aging). Year of manufacture 1972 Process Design by Shell Process Engineering by Edeleanu GmbH Feed = Paraffinic or naphthenic distillates (range of Viscosity = 2 – 160 cst/40°C) Throughput max. 550 t/d (approved), 600 t/d possible (yield range 72% – 96%) Operational operating temperature = 355°C (Reactor WABT = Weighted Average Bed Temperature) Operational operating pressure = 140 bar 1987 – Capacity expansion of the C-5401 to 550 t/d (previously designed for 400 t/d) 2015 – Revamp to operate with pure Hydrogen Make-Up gas (99,99%) 2015 – New column C-5407 (separation of slops into HTFR and HTTOPP) 2021 – new furnace (F-5401) 2021 – Const ...

Comprimo B.V. / Shell Diisopropanolamin (DIPA) Regeneration (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Regeneration of DIPA and stripping of H2S for further processing in the Claus Units. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput DIPA Regeneration max. 1112 t/d (DIPA with 2,79m% H2S load) Operational operating temperature = 102 to 106°C (max. 160°C) Operational operating pressure = 0,5 to 0,8 bar (max. 6,0 bar) 2015 – Complete CUI Program on main column (new coating and insulation) 2022 – Decommissioning

Comprimo B.V. / Shell 5. Shell Claus Offgas Treating (SCOT) (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Downstream minimization (H2S recovery efficiency = 94.5%) in tail gas of Claus Units 1+3. Includes operation of 2 Incinerators. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput SCOT max. 90 t/d Offgas Throughput for each incinerator max. 11,4 t/d (2 Incinerators available) Operational operating temperature SCOT = 270 – 290°C (WABT = Weighted Average Bed Temperature) Operational operating pressure SCOT = 40 to 60 mbar Operational operating temperature Incinerators = 280 to 290°C Operational operating pressure Incinerators = 30 mbar 2015 – Replacement of complete quench tower C-3651 2022 – Decommissioning

Edeleanu GmbH / Shell Fuel Gas Treater (HG Treater) (1978) Year: 1978 Make: Edeleanu GmbH / Shell Treatment of process gases (removal of H2S) by Diisopropanolamine (DIPA) washing. Year of manufacture 1978 Process Design by Shell Process Engineering by Edeleanu GmbH Throughput max. 180 t/d (DIPA-circulation max. 260 t/d) Operational operating temperature = 30 to 50°C (max. = 120°C) Operational operating pressure = 4,0 to 5,0 bar (max. = 12,5 bar) 2022 – Decommissioning

Edeleanu GmbH / Shell 3. Sulphur Recovery (Claus-1) Year: 1956 Make: Edeleanu GmbH / Shell Conversion of the hydrogen sulfide produced in the 3 DIPA regenerators into elemental sulfur. (H2S recovery efficiency = 95.4%) Year of manufacture 1956 (1996 new furnace) Process Design by Shell, Claus Process Process Engineering by Edeleanu GmbH Operational operating throughput = 6 to 36 t/d H2S Operational operating temperature = 250 to 340°C Operational operating pressure = 0,3 bar 2022 – Decommissioning

Year: 1965 Make: SHELL / BADGER N.V. Crude Oil Atmospheric and Vacuum Distillation and Naphtha Stabilizer. Year of manufacture 1965 Process Design by Shell Process Engineering by BADGER N.V. Feed = Original design, paraffinic crude (21 d/month), naphthenic crude (7 d/month), after 2015 Revamp is 100% naphthenic crudes. Crude oil with Total Acid Number (TAN) up to 4,2 (TJP), 3,3 (Laguna), (range of Viscosity = 5,5 – 144 cst/100°C) Throughput max. 12.000 t/d – original design Current Process Parameters (after 2015 Revamp) Atmospheric Distillation: Throughput max. 6000 t/d Operational operating temperature = 355°C Operational operating pressure = 2,5 bar Vacuum Distillation: Throughput = max. 4500 t/d Operational operating temperature = 380°C Operational operating pressure = 0,2 bara Naphtha Stabilizer C-0807: Throughput = max. 2000 t/d Operational operating temp ...

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

Model: C746 No. Of Shelves: 4 Dimension cm: 62x100 Loading surface sq. M: 3,7 Distance between Shelves mm :120 Min temp. Of Condenser ºC : -70 Condensing nominal capacity KG :74 No. Of Trays 310x480x40mm: 24 Trays 300x600x40 mm Overall Dimensions Width A mm: 900 Depth B mm: 2600 Height H mm : 2000 Electric Control Cabinet Width A mm : 770 Depth B mm : 550 Height H mm : 1920 -Specifications are not binding- Refrigeraton Units : dimension according to plant location Power KW (approx) : 25 Total weight Kg : 2900 Ampuls Ø 13: 21.120 Ø 22: 7.440

ALEXANDERWERK ROLLER COMPACTOR, MODEL BT 120 PHARMA Year of construction: 2016 With a benchtop design providing a throughput of up to 8 kg/h (based on lactose). Specially designed for use in research and development areas. Can be used for granulation of biological compounds and active ingredients. TECHNICAL DATA Roller size Roller diameter: 120 mm Roller width: 25 mm Production details Maximal pressure force: 20 kN/cm Maximal roller gap: 4 mm Maximal roller speed: 15 rpm Throughput, continuous operation: up to 8 kg/h (lactose) Size Dimensions (H x W x D): approx. 621 mm x 897 mm x 977 mm Weight (incl. control system): approx. 425 kg The modular design guarantees fast changing and cleaning of all working tools and meets the requirements for flexible working Due to of its modular design, the process technology of the machine can be completely disa ...

New Unused 2016 FEDEGARI XFSW7 Eco-Steam Washer This listing is for one of two brand new 2016 FEDEGARI XFSW7 Eco-Steam Washers complete with trolleys, controls and documentation. A high-end two door GMP washing solution, the XFSW7 (part of FEDEGARI’s FSW range) combines impeccable cleaning results with impressively low operational costs over conventional hot-water systems. This offering represents a unique opportunity for investment in a best-in-class machine, unused and in the original packing, at a fraction of the original retail price. Applications include uses in the food, bio-pharmaceutical, laboratory and cosmetic sectors with suggested loads including machine parts, tools and glassware. Key Information Unit Dimensions (LxWxH): 2300x1690x3000mm Dimensions of Inlet: 1200x1200mm Chamber Depth: 1200mm Door Type: Vertical Sliding Doors Voltage: 400v Three Phas ...

1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. The unit is unused, as good as new. Max. usable cabine dimensions: 670 mm (height); 610 mm (width); 750 mm (depth).

Specifications: Indicative thermal dissipation, doors closed: side 1 - 0.9 kW, side 2 - 0.9 kA, Maximum operating pressure: 3 bar g Approximate weight of empty autoclave 5000 kg Power supply 400 V 50 Hz, 19 kW Pressure (bar g) Flow rate size P1 water recovery from chiller 1,5 120 l/min 34.8x1.65 P1 water from chiller for exchanger 2 120 l/min 34.8x1.65 G water for empty pump 2 20 l/min 15.75x1.65 E1 industrial steam for gap 3 250 kg/h 22.1x1,65 E1 saturated steam ( 95-97%) 3,5 800 kg/h 47.5x1,65 D1 oiled compressed area for tools 5,5 100 NL/min 9.4x1.65 D oiled compressed area for chamber3,5 300 NL/min 34.8x1.65 A general discharge 72.9x165 FIELDS OF APPLICATION The FOA air-steam mixture sterilizer is suitable for: - Sterilization of parenteral solutions, liquids in closed non-deformable containers (e.g., glass tubes) and liquids in closed deformable containers (e.g., ...

FREWITT GRANULATOR, MODEL OSCILLO WITT-3 Year of construction: 2017 Mobile oscillating and rotating sieve mill, for the gentle milling and deagglomeration of heat-sensitive and difficult-to-process products to a fineness of 250 µm. Particle size range: 5 cm - 250 µm Throughput: up to 600 kg/h Product density: up to 2 kg/dm³ Temperature range of product: from -20°C to +60°C Thanks to the continuously variable oscillatory or rotary motion, the constant uniform speed and force application, the product is milled with a very uniform grain-size and a low fraction of fines. DIMENSIONS Length: 1299 mm Width: 860 mm Height: 1417 mm ACCESSORIES INCLUDED 1 mobile HOVMAND drum lifting system (with battery) Sieves 1.00 x 0.63 mm 0.80 x 0.50 mm 2.00 x 1.00 mm 1.00 x 0.63 mm 0.315 x 0.20 mm 1.50 x 1.00 mm 6.00 x 1.50 mm 3.15 x 1.50 mm 0.80 x 0.50 mm ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

Sour Water Strippers (SWS-1 and SWS-2) (1981) Year: 1981 Two redundant units for removal/reduction of H2S and ammonium (NH3) from plant wastewater by using stripping steam. Year of manufacture 1981 Process Design by Shell Process Engineering by Comprimo B.V. Throughout for each SWS max. 1289 t/d (incl. 1,58 t/d NH3 and 2,82 t/d H2S) Operational operating temperature SWS-1 = 102°C, SWS-2 = 95°C Operational operating pressure SWS-1 = 0,1 bar, SWS-2 = 3,3 bar 2022 – Decommissioning

36,000 m3 thermal oil supply system/exhaust air purification plant (special plant construction) WK, Year of construction: 2012, with heat recovery and cooling supply, The system is currently designed for two printing systems. Depending on the Machine equipment for 3 - 4 printing systems. The system consists of the following components: - 1 roof-mounted thermal post-combustion system / exhaust air purification WK Thermal Engineering Plant, boiler and apparatus construction WKTNV, year of construction: 2012, exhaust air volume at the inlet 36,000 m³/h, maximum permissible combustion chamber temperature max. 730 °C, burner type WK/H1 gas cone, Burner power 6,600 kW, fan power 200 kW, maximum permissible inlet temperature 210 °C, Maximum permissible solvent throughput 500 kg/h, natural gas heating medium, calorific value of the heating medium 32693 kJ/m³, max. heating fuel con ...