machines and plants for process engineering used for sale (7,558)

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

GEA Heat Exchanger NT 50 T CDS-10 for sale.

Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel

Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Processing plant Manufacturer: KORUMA Maschinenbau (Neuenburg) Year of construction: 1987 with processing vessel (diameter: approx. 300 mm) with 2 feed tanks, 1 of which is double-jacketed (diameter: approx. 150 mm each) with scraper agitator with sight glasses with temperature gauge with control cabinet & control mounted on a stainless steel frame very good condition LWH: 1100 x 750 x 1450 mm

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, radiator, thermostat.

Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...

Used rotary screener. Capacity: 500 L Cylinder dimensions: 700x1250mm. Material: stainless steel. 2 pieces available.

Used ATEX agitator RW0252800300 – 0.25 KW – 2800 rpm. For smaller containers and drums. ATEX II 2G EEx e II T3 Electric motor: Electric motor VEM motors Thurm GmbH, 0.25 KW, 2-pole, 3 x 230/400 volts, 2800 rpm, IP55. Weight approx. 8 kg. With motor protection plug. Iso F, suitable for frequency converters. Shaft: Precision stainless steel shaft D10, length 500mm, diameter 10mm, Material: Stainless steel 1.4301. With rigid coupling stainless steel 1.4571. Agitator: Double-bladed inclined blade stirrer, diameter 244mm, Material: Stainless steel 1.4571 With PTB-ATEX test certificate.

Used Glatt mixer for powders in bins. Type: Kontainer Mischer. Year of construction 1996. Leg spacing: 105 cm Paw length: 100 cm.

Used Kilian TX-40 AM rotary tablet press. Number of stations 40.

Rotary Vane Pump / Vane Pump PF037200 Electric motor 400 V, 0.37 KW, 1410 rpm Brass Rotary Vane Pump with Clamping Ring Pumping capacity litres per hour: 200 l/h, G 3/8"

EVERDRY Absorber for Compressed Air DN600 x 1700

Air Operated Diaphragm Pump by Flux Model : FDMX/M1 No.3656

Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3: Burkert T CUT Core UF200-125 075 3659 – 3.6 m x 80 pieces. Each membrane contains 19 filter tubes, i.e. these are AC19 membranes. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW

Manufacturer: PCM Type: Moineau 13L10 Nominal diameter: DN50 Flow rate: up to 13,000 l/h Operating pressure: up to 6 bar Incl. overhauled replacement pump (without motor)

Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity 25000 l/u. YOM: 2014 Equipped with 2 density meters, 4 electro-magnetic flowmeters and 3 flow control valves for measuring and controlling fat content in milk and cream. Including original documentation. Controls setup for centralised operation. Excellent condition.

Manufacturer: KSB Type: KRTF 80-25C Power: 7.5 kW Weight: 150 kg

Submersible Flygt 3201.091-9980003 Power: 30 kW / 400V Weight: 490 kg Individual sale possible

Jetstream mixer Manufacturer: Ystral Type: X50/10 (Multipurpose) Machine No.: 2379929 Year of Construction: 2007 with two interchangeable mixing tools infinitely variable speed up to 10,000 rpm on a mobile tripod (stainless steel) height-adjustable with hand crank LWH: 870 x 800 x 1700 mm

Sanding plant, coating plant used Manufacturer: unknown Type: Sanding width approx. 1500 mm 380 V Total dimensions approx. : 3250 x 2250 x 3000 mm The plant was used for sanding Eternit panels. Changes and errors in the technical data, specifications and prices as well as prior sale

Cooling tower with 950 kW cooling capacity, used as extruder cooling. Complete plant with water treatment, plate heat exchanger, switchgear, pumps. Cooling tower for outdoor installation in stainless steel with 2 fans of 15 kW each. Very energy-saving cooling system in mint condition. Due to relocation.

Agitator tank with 3800 l capacity. Container in stainless steel 1.4301. Agitator motor 11 kW, 98 rpm.

MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)

HOVAP AP-Z-2550 Self-priming centrifugal pumps YOM: 2002 5.5 KW 2925 rpm 30m3/h Two pumps available Excellent working condition

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.