other food machines used for sale (949)

Equipment: Agitator,Condition: used,Manufacturer agitator: TMR,Agitator: Propeller,Speed: 1.430,Bottom bearing: No,Voltage Volt: 400/690,Power: 4,Current interferer: No,Material in contact with the product: V4A 1.4571 (AISI316),Type plate: Yes,Agitator Equipment: Principle drawing available (slight dimensional deviations present) Agitators were only used for a short time according to the previous operator 1 agitator with a small dent in the fan cover of the motor (see photos), Shaft Length: 740,Shaft Diameter: 50,Wing Diameter: 220

Equipment: Agitator,Condition: used,Other: Agitator incomplete Rotor (propeller) missing diameter stator top approx. 350 mm Diameter stator bottom approx. 300 mm,Manufacturer agitator: Ystral,Agitator: Jet mixer,Speed: 730 / 1475,Bottom bearing: No,Voltage Volt: 380,Power: 3.5 / 13,Current interferer: No,Material in contact with the product: V2A 1.4301 (AISI304),Nameplate: Yes,Wavelength: 600,Shaft diameter: 75

Equipment: Agitator,Condition: factory new,Agitator: Beam stirrer,Speed: 17,Bottom bearing: No,Voltage volt: 230/400,Power: 3,Current interferer: No,Material in contact with the product: V4A 1.4401/04 (AISI316),Type plate: Yes,Agitator Equipment: Wavelength measured from the underside of the lantern Diameter of stirring blades: approx. 1 x 1,130 mm, 1 x 1,530 mm, 1 x 1,930 mm Stirrer blades must be welded to the agitator shaft on site before using the agitator, one agitator is missing the lantern, Wavelength: 2620,Shaft Diameter: 60

Equipment: Agitator,Condition: used,Other: Also sold with matching mixing tank, see #8336.,Manufacturer agitator: Ystral,Agitator: Jet mixer,Speed: 730 / 1455,Bottom bearing: No,Voltage Volt: 400,Power: 13 / 19,Current interferer: No,Material in contact with the product: V2A 1.4301 (AISI304),Type plate: Yes

Condition: used,Other: Drive power: 11 kW Areas of application: Mixing / homogenizing and pumping over emulsions and pastes,Total height: 650,Total length: 1,200,Total width: 460

Condition: used,Other: Overall width: 1,950 mmTotal depth: 1050 mmTotal height: 1,400 mmHot mixer: approx. 10 litres - 5.5 kWCalter mixer: approx. 25 litres - 2.2 kWFflange closure of the hot mixer may be missing and would have to be replaced on site,Manufacturer: DIOSNA Dierks & Söhne

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Incomplete Cream separator (Skimmer). Self cleaning. Machine comes with the frame, bowl, hood, horizontal and vertical axle., Additional features:, � ��Excludin g:, - Motor., - Motorcover., - Baseplate and feet, - Waterbox with water valves., - Inlet / outlet pipes., - Control panel., - Service tools for maintenance., Additional with this stocknumber several unused and used spare parts., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.450 rpm, Weight: 1.420 kg, Dimensions: 145 x 110 x 175 cm

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Used HEUFT empty bottle inspector 72000 BPHTechnical Specifications & Performance DataThis Empty Bottle Inspector (EBI) is engineered for high-speed beverage production and industrial packaging environments. Manufactured by HEUFT, the system combines a HEUFT InLine reflexx Release 9 inspector with a HEUFT Spectrum SX TB 72 pre-selection unit, networked for complete bottle flow control. Designed for integration in a used bottling line, it offers robust inspection performance for returnable glass bottles at line speeds up to 72,000 bottles per hour.Manufacturer: HEUFTPrimary model: InLine reflexx Release 9Pre-selection unit: Spectrum SX TB 72 (with Gateway II network interface)Additional platform reference: Spectrum TXYear of manufacture: 2009Maximum capacity: 72,000 bottles/hourBottle formats: Compatible with 0.33L and 0.5L bottle formatsContainers: Designed for Glass bottle handling (gre ...

Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated sa ...

Technical Specifications & Performance Data The New Bottle Inspector Weight Checking Inspections Unit with Rejection Piston is an inline, high-throughput solution engineered for precise mass verification of individual packages without stopping product flow. Purpose-built for beverage production and industrial packaging environments, it delivers reliable, non-contact rejection for out-of-tolerance items, ensuring consistent quality and regulatory compliance. Application: Inline dynamic weight control with automatic reject piston Maximum speed: up to 11,000 bph (bottles/packs per hour) Inspection type: 2 (dual-threshold underweight/overweight logic) Containers: Brik cartons and cans (aluminum tins/cans) Conveying architecture: multi-conveyor configuration (4 conveyors) for stable weighing and controlled reject Operation: Simultaneous weighing without line stoppage; positive push-off reject ...

Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through: – traditional commands (push button panel) – PC hardware (video, keyboard and mouse) Traditional commands In order to allow quick and safe intervention by the operator, the controls have been provided of a traditional type; for example: – machine stop – machine running – etc. PC hardware The machine is equipped with the main hardware elements of the PC, such as: – video – keyboard – mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine, follow the values ​​indicated: – storage temperature: from -10 to 60 ° C – ambient operating temperature from 10 to 45 ° C – temperature inside panels: Power electrical cabinet: – electrical power cabinet temperature: t.MAX.

Technical Specifications & Performance Data The Used Bertolaso Inspector 2002 Push 210 is a compact, reliable inspection station engineered for quality assurance on a used bottling line handling still wine in glass bottles. Designed to monitor fill-level accuracy and closure presence, it helps producers maintain consistent packaging quality and reduce downstream rejects in beverage production environments. Manufacturer / Model: Bertolaso Push 210 Year: 2002 Category: Inspector (Inspection type: 2 – fill level and closure presence) Condition: READY FOR OPERATION Container types: Glass (inspection station primarily configured for glass bottles) Bottle formats: 0.06 L, 0.375 L, 0.75 L Product types: Wine (still) Core functions: Automatic minimum/maximum fill-level control; cap/cork presence check; automatic reject to external area Auto-calibration: Continuous self-calibration using the pr ...

Used Inspector Filtec 2007 This is a used inspector manufactured by Filmtec in 2007 of the modell Omnivision 1. It is able to inspect up to 45,000 bottles an hour. The bottle formats that it is capable of inspecting are: – 0.33L and 0.5 L Bottles upside down – 0.33 L Steinie – 0.5 L NRW All the safeguards and manuals of this used inspector are available. The maintenance documentation is available as well. The machine is currently ready for operation. It processes beer in glass bottles. Type of inspection performed: CCD – Camera PLC type: DSP (Digital Signal Processing) Some spare parts are also available.

Technical Specifications & Performance Data The Used Ispector Logico 2016 CPWE is a dynamic checkweigher engineered for precise weight control in industrial packaging and beverage production environments. Ideal for end-of-line verification on a used bottling line or second hand packaging line, it helps ensure compliance with declared weights for cases, cartons, trays, and shrink-packs before palletizing. Manufacturer: Logico Model: CPWE Year: 2016 Inspection type: Weight control (Inspection type: 2) Applicable weight range: 0.2 – 30 kg Handled items: Boxes, cartons, cases, shrink-packs Dimensions: Width 780 mm, Length 680 mm, Height 1800 mm Electrical requirement: 230 V, 50 Hz Operating state: Disassembled; condition: in storage Production speed: Application-dependent based on line conveyor speed and product weight Safety: Accident-prevention protections included Advanced Automation &  ...

Including trim removal unit, Capacity: up to 3 cycles/min, Product length: max 750 mm, Belt width: 800 mm, Seal bar: 1350 mm, Vacuum pump: Busch Panda WV1500B roots, Compressed air: 6 Bar, 250 Nl/min, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 3750 x 1500 x 2200 mm, Weight: 2200 kg

NEW in box, never used, Order number: ON17163, Capacity: max 800 pigs/hr., Products: pork carcasses, left & right, Slaughtered weight: 70 - 120 kg, Air pressure: 6 - 8 Bar, 285 Nl/min., Power: 3 x 400V, 50Hz, 45kW, Dimensions: 10000 x 5150 x 2300 mm

Line is consisting of:, Henkelman double chamber vacuum machine, Type: Titaan 2-90, Serial number: HTN10220019, Year of construction: 2023, Chamber: 840 x 890 x 220 mm, Seal bar: 2 x 840 mm, Cycle: 30 - 50 sec, Vacuum pump: Busch 300 m³/hr, Compressed air: 6 Bar, 100 Nl/min, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 2450 x 1100 x 1150 mm, Weight: 850 kg, Automatic lid and outfeed conveyors, Hellings conveyor, Type: 12980-10, Serial number: 790311, Year of construction: 2021, Belt width: 600 mm, Length: 3000 mm, Henkelman diptank, Type: 200A, Serial number: H0D20220008, Year of construction: 2022, Heating: electric, Usable space: 575 x 1100 mm, Immersion depth: 200 mm, Cycle time: 22 sec, Compressed air: 6 Bar, 50 l/min, Power: 3 x 400V, 50Hz, 23kW, Dimensions: 1200 x 2500 x 1350 mm, Weight: 310 kg

Line consists of:, Sugar cube line:, Type: T.T.O.R. 125, Year of construction: 2014, Capacity: 500 kg/hr, Cube size: 10 x 20 mm, Belt width: 295 mm, Drying tunnel: 18000 mm, Cooling tunnel: 4000 mm, Big bag infeed bunker, Capacity: max 1200 kg, Platform height: 1550 mm, Elevating height: 3000 mm, Dimensions: 3100 x 2020 x 4750 mm., Box forming machine, Box size: 210 x 100 mm, Belt width: 100 mm, Dimensions: 1500 x 1400 x 1630 mm, Box closing machine, Belt width: 100 mm, Distance between dividers: 330 mm, Dimensions: 2360 x 700 x 1600 mm

Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam:  ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate with feet, cyclone and all inlet / outlet pipes., Additional features:, � ��Excluding:, - Waterbox with water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.000 rpm, Motor: 22 kW - 380 V - 42 A - 1.450 rpm - 50 Hz - 3 Ph, Weight: ± 1.650 kg, Dimensions: 145 x 110 x 175 cm

Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a screw/paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to adapt residence time and separation efficiency. Sold with 1000 L hopper and flexible screw conveyor. Condition as new (used only for testing), functional and immediately available. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solids outlet) • Construction: stainless steel 304 • Basket/screen: wedge wire basket (stainless steel 304) • Paddle: expanded 7.5°” (stainless steel 304) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Air/gas purge (seals): clean/dry/filtered air/gas required Motorization (motor plate) • 3~ motor: 2.2 kW, 5 ...

Microwave tunnel conveyor dryer for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water cooling circuit included. Ventilation system to extract water vapor from the chamber not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electrical • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: PTFE food grade (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 150 ...

Water connection: 1/2 inch RG, water pressure: 0.7-6bar, water connection temperature: 50°C, drain diameter: 40mm, wash tank capacity: 95l, wash water temperature: 60°C, wash pump power: 2kW, wash pump capacity: 600l/min, wash pressure in the nozzles: 1.4bar, rinse tank capacity: 13l, rinse water temperature: 85°C, rinse pump power: 0.37kW, rinse pump capacity: 350l/min, rinse pressure in nozzles with rinse pump: 0.8bar, wash programs: 2, 4 and 6min, washing volume: 635x690x610mm, noise level: 70dB(A), water consumption per wash cycle: approx. 6l, heating element power: 2x 6kW + 1x 4.5kW, fuse protection: 32A, working height: 906mm, internal opening dimension: 508.5mm, length: 1265mm, width: 805mm, height opened: 2030mm, net weight without water: 225kg, gross weight without water: 250kg. An on-site inspection is possible, without power.