other machinery for waste disposal and recycling used for sale (391)

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/view?usp=d rive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600 ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

Slightly used, technically flawless! Control: Simatic Tank capacity: 700l 1x Coolant pump high pressure: Flow volume 30l/min / 50 bar 1x Coolant pump low pressure: Flow volume 80l/min / 3 bar Fleece width: 390mm Connection: Voltage: 3x400V+PE/50Hz Power: 7.5kW Rated Current: 15A Pre-fuse maximum: 50A Dimensions LxWxH: 1700 x 1400 x 2100 mm Total weight empty: 650kg

Eichinger 2041.10 waste box van; Volume 750L; Load capacity 300kg; tilting; on wheels. Waste box wagon Eichinger 2041.10; capacity 750L; lifting capacity 300kg; tiltable; with rolls.

ID3574 Monsuna AKS A4 year/Baujahr 2014 Tire washing system for commercial vehicles, Monsuna type AKS A4 series, including tank, control system, signaling system, and contact loop for automatic operation. The washing zone is fully galvanized. The water supply is fully integrated into the module frame. Passage zone: 4000 mm long x 3100 mm wide (clear passage width: 2900 mm). Weight: approx. 5,000 kg (2 washing modules, each with a capacity of 2,500 kg). Tank: 7000 mm long x 3000 mm wide. Weight (unfilled) approx. 3,560 kg. Tyre washing system for commercial vehicles Monsuna type AKS A4 incl. tank, control system, signalling system and contact loop for automatic operation, the washing zone is completely galvanised, water supply is completely integrated into the module frame, passage zone: 4000 mm long x 3100 mm wide (clear clearance width: 2900 mm), weight: approx. 5,000 kg (2 wash mod ...

Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.

Vacumet High-Tech Waste Management System Demonstration machine as good as new Tank size: 142 litres Volume reduction: 50 - 70 % Body material: powder-coated steel Weight: 198 kg Degree of protection: IP 54 Connected loads: 230 V 50 Hz 1 kW Control: PLC Noise level: 60 db Tested / Safety: EN 60204 - VDE 0113 Dimensions: W: 920 x D: 750 x H: 780 mm kasu - vacumet is a modern machine for disinfecting the exhaust air and reducing waste. Vacuum and the introduction of an odour blocker neutralise unpleasant odours, trap bacteria and viruses and contain bacterial carry-over. Due to the subsequent sealing of the foil bags and flooding of the chamber with atmospheric pressure, a pressure of approx. 8,000 kg/m² acts on the PA/PE garbage bag, thus achieving an enormous volume reduction.

Manufacturer:Husmann Model: HL II 1622 Year of Manufacture: 2020 - Maximum RPM: 20 – 40 - Operating Voltage: 230V / 400V - Operating Pressure: 400 bar - Power: 330 kW - Permissible Total Weight: 22,000 kg - CE Certified Find more here - / Contact us at -

We offer for sale a complete set of Indutec industrial shredder model PM16/3, equipped with all its original components and accessories, ideal for intensive industrial use in the sectors of recycling, material shredding or industrial processing. ✅ General Features: Model: Indutec PM16/3 Type: Heavy Industrial Shredder, High Power Condition: Excellent condition, complete, with accessories and spare parts Total weight: Approximately 47,500 kg divided into two containers + base Composition of the set (ready to operate): First container – N° 128790 – 13,000 kg Engine: WEG 315 S/M – 150 kW – Gearbox: FLENDER B3 SV 11A – 118 kW – Pump: Neuman & Esser CCS 6-M – 0.25 kW – Neuman & Esser clocks: 1.1, 1.2, 1.3, 1.4 Separator Gasket Lubrication tank Mill flange Spare parts set: blade holder, bevel gear, pendulum shaft, body and heads, bolts Second contain ...

Fabric sliders: o Various nominal diameters available o Versions: Mechanical and pneumatic o Robust and durable for industrial applications Knob: o Precise control of flow rates o Choice of mechanical or pneumatic Condition: Mint

MAGNETIC SEPARATORS, in form of overbelt plates,, grids, channels, stars, etc.

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

Including: Injector Hopper Pipe connection Bends Clamps Cyclone Customized to your project

For sale: Paper recycling and sorting machine with integrated reversible conveyor belt system 1) Paper Processing Machine Manufacturer: Hartner Year of Manufacture: 2013 Operating Hours: 3500 2) Reversible Conveyor Belt Manufacturer: Hillebrand Model: 4 GB 1400 Find more here - / Contact us at -

1 piece used separator Manufacturer: TiTech Type Titech AutoSort [NIR1-VIS] [S-2000] [X-H] including acceleration band Conveyor width approx. 2,000 mm AA approx. 5,000 mm

Fe separator, overbelt magnet. Overall dimensions with gearbox LxWxH: 2950x1800x550 mm Rubber belt width: 1280 mm Magnetic core dimensions LxWxH: 1580x1150x300 mm Total weight approx. 3500 kg Motor/gearbox: SEW ,power 2.2 kW Machine checked, ready for immediate use Base Available, dimensions approx. LxWxH 3100x2800x6000 mm

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW If you have any questions, please call us: +48 696 072 985

Specifications Strip width: 500 mm Distance between side walls: 5 m Length: 40 mm Power connection: 0.75kW Threshold height: every approx. 400mm Motor power: 400V Threshold spacing: 550 mm

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2005 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 3,100 mm horizontally underfloor, then rising below 28° over a length of approx. 6,000 mm, Descending below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec. Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the be ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1750 Year of Make: 2004 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 4,300 mm horizontally underfloor, then increasing over a length of approx. 6,300 mm, Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 1,027 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers, - Belt routing in a neutral zone to avoid stretching tensions, - Chain type M-80 with case-hardened bushings, bolts and roller ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2009 specifications: Conveying width: approx. 1,500 mm Center distance: approx. 9,625 mm Belt course: approx. 3,000 mm horizontally running underfloor, then rising below 30° over a length of approx. 5,875 mm, sloping below 20° on the remaining length and conveying into the press Conveyor belt drive power: 3.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers,  ...

Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...

Manufacturer: HAVER NIAGARA Model: T-Class U 400x800 1D Year of Manufacture: 2023 Type of Machine: Screening Machine/ Vibrating Screen Find more here - / Contact us at -

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - / Contact us at -

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal steel tank with inner coating, pressure tank Can be used underground and above ground Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Modular Recovery Plant for PCB Recycling The modular recovery plant, in operation since the second quarter of 2016, is based on a proven process for efficiently recovering valuable metals. The process begins with the shredding of 80 tons of PCB boards, which are then sorted into different material fractions. At this stage, plastics and aluminum are removed, while non-ferrous metals (NE), ferrous metals (FE), and flakes are prepared for further processing. These materials then undergo two sequential furnace steps, where they are heated and processed. During this thermal treatment, slag is formed as a byproduct, along with copper-bearing material, which is directed to the metal recovery stages. Metal recovery is carried out in several steps. Through the anode process, lead and silver are separated, while electrolysis is used to extract copper. In the final stage, a smelting process is a ...