used Injection molding machines for sale

CLAMPING FORCE: 200TON PLATEN SIZES: 810 X 810MM D.B.T.B: 570 X 570MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 510MM MAX DAYLIGHT: 1220MM EJECTOR STROKE: 150MM SCREW DIAMETER: 45MM INJECTION PRESSURE: 2300BAR STROKE VOLUME: 382CM3 SHOT WEIGHT (P/S): 348GR CONTROLS: MOSAIC MOTOR: 32KW HEATING CAPACITY: 16.6KW SCREW DRIVE: ELECTRIC CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP 67

B&A REF: 9033 TON: 370 SHOT WEIGHT: 1060 SCREW DIAMETER: 70MM STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 990 X 1070MM DBTB: 630 X 710MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 22KW SCREW DRIVE: HYDRAULIC ROBOT INTERFACE: EUROMAP

B&A REF: 9002 TON: 250 SHOT WEIGHT: 340 SCREW DIAMETER: 45MM STROKE VOLUME: 374CM3 INJECTION PRESSURE: 2250AR PLATEN SIZES: 860 X 790MM DBTB: 590 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1200MM EJECTOR STROKE: 225MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 HEATING CAPACITY: 12KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

B&A REF: 8827 TON: 120 SHOT WEIGHT: 211 SCREW DIAMETER: 40MM STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 800MM EJECTOR STROKE: 125MM CONTROLS: ORION CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9.3KW SCREW DRIVE: HYDRAULIC

B&A REF: 8981 TON: 210 SHOT WEIGHT: 435G SCREW DIAMETER: 52MM STROKE VOLUME: 480CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 870 X 790MM DBTB: 570 X 510MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 540MM MAX DAYLIGHT: 1170MM EJECTOR STROKE: 225MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22KW HEATING CAPACITY: 20KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

CLAMPING FORCE: 1000 TON PLATEN SIZES: 1580 X 1800 D.B.T.B: 1000 X 1250 MIN MOULD HEIGHT: 500 MOULD OPENING STROKE: 1200 MAX DAYLIGHT: 2400 HYDRAULIC EJECTOR STROKE: 400 SCREW DIAMETER: 120 INJECTION PRESSURE: 1700 STROKE VOLUME: 6898 SHOT WEIGHT (P/S): 6270 CONTROLS: DIMI EL 2 PLUS MOTOR: 111 HEATING CAPACITY: 55 SCREW DRIVE: ELECTRIC CORE PULLING: 2 AIR VALVES; 4 ROBOT INTERFACE: EUROMAP 67

B&A REF: 8968 TON: 1000 SHOT WEIGHT: SCREW DIAMETER: 100MM STROKE VOLUME: 3925CM3 INJECTION PRESSURE: 1670AR PLATEN SIZES: 1800 X 1580MM DBTB: 1250 X 1000MM MIN MOULD HEIGHT: 500MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 1100MM MAX DAYLIGHT: 2300MM EJECTOR STROKE: 400MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP SCREW DRIVE: ELECTRIC

B&A REF: 9027 TON: 110TON SHOT WEIGHT: 210 SCREW DIAMETER: 40MM STROKE VOLUME: 235CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 680 x 650MM DBTB: 450 X 400MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 410MM MAX DAYLIGHT: 910MM EJECTOR STROKE: 150MM CONTROLS: DIMI EL 2000 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9.3KW SCREW DRIVE: HYDRAULIC

B&A REF: 9001 TON: 160 SHOT WEIGHT: 260 SCREW DIAMETER: 40MM STROKE VOLUME: 285CM3 INJECTION PRESSURE: 2100AR PLATEN SIZES: 780 X 740MM DBTB: 510 X 450MM MIN MOULD HEIGHT: 170MM MAX MOULD HEIGHT: 550MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1010MM EJECTOR STROKE: 200MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 19 HEATING CAPACITY: 12KW SCREW DRIVE: HYDRAULIC

Clamping Force: 700 // Shot Weight (Max): 3640

B&A REF: 8987 TON: 120 SHOT WEIGHT: 210 SCREW DIAMETER: 40MM STROKE VOLUME: 235CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 680 X 650MM DBTB: 450 X 400MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 135MM MAX DAYLIGHT: 910MM EJECTOR STROKE: 135MM CONTROLS: DIMI EL2 PLUS AIR VALVES: 1 SCREW DRIVE: ELECTRIC

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

Screw diameter: 90 mm Injectable volume: 2860 cm Injectable weight: 2700 g Column width: 960 x 830 mm Opening stroke: 1000 mm Mould thickness: min: 300 mm -max: 900mm 2 hydraulic cores

B&A REF: 8945 TON: 450 SHOT WEIGHT: 916 SCREW DIAMETER: 70MM STROKE VOLUME: 954CM3 INJECTION PRESSURE: 2144AR PLATEN SIZES: 1150 X 1185MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 500MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 800MM MAX DAYLIGHT: 1750MM EJECTOR STROKE: 250MM CONTROLS: DPS CORE PULLING: 2 AIR VALVES: 3 MOTOR: 75 HEATING CAPACITY: 43KW ROBOT INTERFACE: STAR UXE 1000 SCREW DRIVE: ELECTRIC

Screw diameter: 55 mm Injectable volume: 515 cm3 Injectable weight: 460 g Injection pressure: 2400 g Column width: 1020 x 920 mm Aperture stroke: 900 mm Mould thickness: min: 600 mm - max: 1050

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in 2005, is used in the process of processing thermoplastics by injection moulding. The characteristic feature of the machine is a two-plate hydraulic mould closing system with attached closing cylinders, working with a force of 25 tons. The machine’s screw with 22 mm in diameter rotates at a speed from 10 to 370 rpm and is driven directly by a hydraulic motor. The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows for high automation of the injection process with setting and control of the injection parameters from the control panel located on the body of the machine. The injection moulding machine is offered with a wide range of equipment, including a plastic feeder and a MITSUBISHI E600 HMI panel. Total weight of the machine is 1470 kg. Characteristics of PONAR ŻYWIEC UT-025 H injection moulding ...

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...

Clamping Force: 1400 ton // Shot Weight (Max): 4636 g

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

CLAMPING FORCE: 820TON PLATEN SIZES: 1730 X 1560MM D.B.T.B: 1250 X 1060MM MIN MOULD HEIGHT: 350MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM SCREW DIAMETER: 93MM INJECTION PRESSURE: 1478BAR STROKE VOLUME: 2777CM3 SHOT WEIGHT (P/S): 2555GR CONTROLS: SEF 2000 MOTOR: 93KW HEATING CAPACITY: 41KW SCREW DRIVE: HYDRAULIC CORE PULLING: 3 AIR VALVES: 2 ROBOT INTERFACE

B&A REF: 8986 TON: 700 SHOT WEIGHT: 5618G SCREW DIAMETER: 120MM STROKE VOLUME: 6107CM3 INJECTION PRESSURE: 1500AR PLATEN SIZES: 1560 X 1560MM DBTB: 1060 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 AIR VALVES: 4 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

B&A REF: 9009 TON: 220 SHOT WEIGHT: 575G SCREW DIAMETER: 55MM STROKE VOLUME: 529CM3 INJECTION PRESSURE: 1550BAR PLATEN SIZES: 860 X 860MM DBTB: 585 X 585MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 580MM MAX DAYLIGHT: 1210MM EJECTOR STROKE: 230MM CONTROLS: SEF 2000 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

B&A REF: 8980 TON: 200 SHOT WEIGHT: 502G SCREW DIAMETER: 55MM STROKE VOLUME: 546CM3 INJECTION PRESSURE: 1450AR PLATEN SIZES: 770 X 770MM DBTB: 510 X 510MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1180MM EJECTOR STROKE: 190MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 1 ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

B&A REF: 8985 TON: 150 SHOT WEIGHT: 370 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 1560AR PLATEN SIZES: 690 X 690MM DBTB: 460 X 460MM MIN MOULD HEIGHT: 155MM MAX MOULD HEIGHT: 560MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 160MM CONTROLS: SEF 90 ROBOT INTERFACE: EUROMAP 12

B&A REF: 8983 TON: 380 SHOT WEIGHT: 1310G SCREW DIAMETER: 75MM STROKE VOLUME: 1370CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1140MM EJECTOR STROKE: 240MM CONTROLS: SEF 100 AIR VALVES: 1 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

Stork S 5500-2150 Year of construction: 2002 Brand: Stork Specifications Spray weight: 1.218 g Clamping force: 5500 kN Screw diameter: 72 mm Spar spacing: 1010 x 1010 mm Clamping plate size: 1475 x 1485 mm Tool installation height min.: 300 mm Control: CDS-600 Operating hours: 29,000 h Language: English,Polish Power: 190 kW Weight: 40200 kg Core train: Yes Euromap: Yes Air valve: Yes Heizkanāle: Yes Toggle lever locking unit: Yes Gas storage: Yes

screw size: 115 mminjection shot weight in Polysterol: 3915 g/PSclosing pressure: 6600 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 133 mminjection shot weight in Polysterol: 5940 g/PSclosing pressure: 8000 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SUMITOMO full electric SE50EV (50 ton) 2013 x 2 units used injection molding machine for sale. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Clamping Force: 210 ton // Mould Height (Max): 790 mm

CLAMPING FORCE: 250TON PLATEN SIZES: 930 X 930MM D.B.T.B: 630 X 630MM MIN MOULD HEIGHT: 330MM MOULD OPENING STROKE: 670MM MAX DAYLIGHT: 1380MM EJECTOR STROKE: 200MM SCREW DIAMETER: 50MM INJECTION PRESSURE: 3032BAR STROKE VOLUME: 530CM3 SHOT WEIGHT (P/S): 482GR CONTROLS: NC5 SCREW DRIVE: ELECTRIC AIR CIRCUIT: 4

Sumitomo Demag IntElekt 50/370-80 / Electric Machine Year of construction: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Size of clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Air Valve x 4 Control with hot runners Injection unit hardened - Bimetal Central lubrication It is possible to change the screw diameter Metrics: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...

Sumitomo Demag injection molding Systec Wittmann Robot Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Tederic D130 with the Sepro Industrial Robot 55 sprue picker / hybrid machine / operating hours: approx. 9,500 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 42 mm Spray weight: 246 g Spray pressure: 1900 bar Dosing volume: 270 ccm Clamping unit : Clamping force: 130 t Tie bar spacing: 420x420 mm Size of clamping plates: 620x620 mm Ejector: electric Clamping unit: toggle lever Control: KEBA - Touchscreen Additional equipment: Perfect technical condition, machine like new Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 9,500 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 3 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Central lubrication Parallel Movements Sprue Picker Sepro Industrial Robot 55 Year of con ...

Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

TOYO full electric Si-180-S (180 ton) year `2017

Clamping Force: 450 // Shot Weight (Max): 1865

Injection Molding 300T Wittmann, 2017 year at Germany. EcoPower 55 – 550 t EcoPower Xpress 160 – 550 t MicroPower 15 t MacroPower 400 – 2000 t SmartPower 25 – 400 t CM 40 – 80 t VM R 40 – 300 t VM 60 – 200 t VPower 120 – 300 t R

WELLTEC TTI 450 FH injection moulding machine was manufactured in 2008 in Hong Kong. The machine of rigid steel construction, is ideal for the mass and unit production of plastic products. Plastic of sufficient plasticity is fed into an injection mould of minimum dimensions (L x W) of 125 x 125 mm, which is then clamped with a high force of up to 450 tonnes. The high clamping force and the reliable components used in the machine ensure that the user receives products of the highest quality and that productivity and efficiency are significantly increased. The WELLTEC 450 T injection moulding machine is also equipped with a CNC controller for the input and editing of all the necessary machining parameters. The total weight of the machine is 17600 kg. Technical data of the plastic injection moulding machine WELLTEC TTI 450 FH - CNC controller - maximum clamping force: 450 t (4500 kN)  ...

WELLTEC TTI 450 FH injection moulding machine built in 2008 in Hong Kong, is distinguished by its high clamping force of up to 450 tonnes and efficient high-end components. The machine designed for plastic processing uses the injection moulding method, which involves feeding plastic of suitable plasticity into an injection mould of minimum dimensions 125 x 125 mm and then clamping it with high force. As a result, high quality products are obtained in a very short time. The WELLTEC injection moulding machine has a steel structure, inside which are installed state-of-the-art components to maximise overall productivity and efficiency, and to ensure reliable operation of the injection moulding machine for many years of use. On the arm there is an operator panel with a convenient and easy-to-use CNC controller, with which the operator can enter and edit all the possible parameters of the p ...

Wittmann Battenfeld EcoPower 300/750 / Electric machine / production line with Wittmann W821 robot and conveyor belt Year of construction: 2012 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1250x1110 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6S - Touchscreen Additional equipment: Production line with Wittmann W821 robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Perfect technical condition Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Automatic tool height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of construction: ...

Wittmann Battenfeld MicroPower 5/7.5 / Electric motor / Operating hours: approx. 300 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 14 mm Injection weight: approx. 2.5 g Injection pressure: 2500 bar Dosing volume: 3 ccm Clamping unit: Clamping force: 5 t Size of clamping plates: 240x400 mm Ejector: electric Control: UNILOG B6 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Built-in vacuum pump from the Becker brand Automatic height adjustment of the injection unit Metrics: Weight: 1370 kg Length/Width/Height: 2.09x0.97x2.50 m Drive: Heating capacity: 2.45 kW A ...

Wittmann Battenfeld Smart Power 90/350 / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 35 mm Spray weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 90 t Tie bar spacing: 470x420 mm Size of clamping plates: 680x660 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 24,000 in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter - energy saving Proportional valve on the injection unit – precise injection It is possib ...

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number ...

Wittmann Battenfeld VM 200/1000 R1755 / Vertical injection moulding machine with rotary table / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 55 mm Spraying weight: approx. 570 g Spray pressure: 1666 bar Dosing volume: 594 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 620x570 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touchscreen Additional equipment: Vertical Injection Molding Machine with Rotary Table Operating hours: approx. 18,000 h in automatic mode Euromap 67 Robot Interface Air Valve x 4 Core Pull Control Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1755 mm Infrared Protective Curtains The machine was serviced by the authorized service Wittmann Battenfeld Aluminium platform with st ...

Wittmann Battenfeld VM 200/525H R1520 Servo Power / Hybrid machine with one turntable Year of construction: 2013 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 200 t Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 in automatic mode Air Valve x 4 Hydraulic Core Pull x 6 Control with hot runners Injection unit hardened - Bimetal Turntable diameter: 1520 mm Main motor of the machine - servo motor driven by inverter Horizontal injection unit with automatic injection height adjustment The machine can work with a second vertical injection unit Holder for automatic tool clamping Proportional valve on the injectio ...

Clamping Force: 150 ton // Shot Weight (Max): 358 g