used Injection molding machines for sale

Production year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61 cc Injection weight: 54 g Tool closure system: .../500 Clamping force: 50 t Tool plate dimensions: 520 x 520 mm Distance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max.Distance plates: 610 mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 3.7 m x 1.4 m x 1.8 m Weight: 2900 kg

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working

Injection moulding machine Demag Ergotech 5000-5200 Parameters: Production year: 2001 Control: NC10 Injection unit: .../5200 Screw diameter: 95 mm Specific injection pressure: 1550 bar Injection volume: 2835 ccm Injection weight: 2550 g Tool closure system: 5000/... Clamping force: 500 t Tool plate dimensions: 1300 x 1200 mm Distance between columns: 900 x 800 mm Tool height: 400...880 mm Opening distance: 810 mm Maximum plate distance: 1690 mm Ejector stroke: 230 mm General data: Dimensions (m) LxWxH: 9,40 x 2,30 x 2,50 m Instrumentation: 6 x pneumatic cascade 2 x Hydraulic Core

Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in � ...

Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...

Ref. no.: 18142Producer: DEMAGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 400 mmDistance between tie bars: 355 x 355 mmMould height min.: 210 mmPlaten size (h x v): 540 x 540 mmInjection unitScrew diameter: 35 mmInjection volume: 106 cm³Shot weight: 95 gInjection pressure: 2573 barMeasurements and weightDimensions: 3,65 x 1,15 x 1,18 mMachine weight: 3600-2500 kg

warehouse no.: 503061 manufacturer: DEMAG type: Ergotech system 150-610 controller: NC4 year of construction: 2004 operation hours: 63329 h clamping force: 1500 kN distance between tie-bars h x v: 500 x 500 mm size of mould plates h x v: 750 x 750 mm min. mould height: 250 mm max. mould height: 560 mm max. open daylight: 1060 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 323 ccm injection pressure: 1973 bar equipment included: Ejector parallel to the mould movement screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 1x air valve 1x machine with material hopper machine without belt conveyor machine without hopper loader Anti vibration mounts Schuko-socket 10A choice unit measures of machine l x w x h: 5.45m x 1.63m x 2.1m total weight: 7500KG

CLAMPING FORCE: 50TON PLATEN SIZES: 540 X 540MM D.B.T.B: 355 X 355MM MIN MOULD HEIGHT: 210MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 610MM SCREW DIAMETER: 35MM INJECTION PRESSURE: 1890BAR STROKE VOLUME: 144CM3 SHOT WEIGHT (P/S): 128GR CONTROLS: NC4 MOTOR: 11KW HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC CORE PULLING: 1 AIR VALVES: 1

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Built: 2003 specifications Screw diameter [mm]: 35 Spray weight [g]: 150 Spray pressure [bar]: 1865 Closing force [kN]: 1000 Tie bar distance [mm]: 420x420 Clamping plate size [mm]: 600x600 Tool installation height min. [mm]: 200 control Control: ERGOcontrol Monitor: Yes Control cabinet: Yes Language: Yes other Power [kW]: 46.7 Engine hours [h]: 67455 Dimensions [m]: 4.6x1.5x2.1 Weight [kg]: 6500 - KNIESCHLIESSEINHEIT - CORE TRAIN - EUROMAP - AIR VALVE

Ref. no.: 18398Hersteller: DEMAGYear of construction: 2006Clamping unitClamping force: 160 tonOpening stroke: 500 mmDistance between tie bars: 520 X 520 mmMould height min.: 275 mmMould height max.: 585 mmOpening width: 1085 mmPlaten size (h x v): 770 X 770 mmInjection unitScrew diameter: 50 mmInjection volume: 399 cm³Shot weight: 360 gInjection pressure: 1550 barMeasurements and weightDimensions: 4,9 x 1,5 x 2,0 mMachine weight: 6720 kgAdditional information & extrasCore pull: 1 pcs

B&A REF: 9004 TON: 200 SHOT WEIGHT: 570G SCREW DIAMETER: 60MM STROKE VOLUME: 636CM3 INJECTION PRESSURE: 1351AR PLATEN SIZES: 830 X 830MM DBTB: 560 X 560MM MIN MOULD HEIGHT: 310MM MAX MOULD HEIGHT: 660MM MOULD OPENING STROKE: 575MM MAX DAYLIGHT: 1235MM EJECTOR STROKE: 180MM CONTROLS: NC4 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

warehouse no.: 503175 manufacturer: DEMAG type: Extra 35-80 controller: NC4 year of construction: 2004 clamping force: 350 kN distance between tie-bars h x v: 280 x 280 mm size of mould plates h x v: 460 x 450 mm min. mould height: 105 mm max. open daylight: 455 mm opening stroke: 350 mm screw diameter: 18 mm swept volume: 23 ccm injection pressure: 2868 bar equipment included: screen text german CEE-socket 16A machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 3.3m x 1.2m x 2m total weight: 2620KG

B&A REF: 8963 TON: 160 SHOT WEIGHT: 402 SCREW DIAMETER: 50MM STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X 770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 810MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 150MM CONTROLS: NC5 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

Ref. no.: 18383Hersteller: DEMAGYear of construction: 2008Clamping unitClamping force: 420 tonOpening stroke: 770 mmDistance between tie bars: 820 X 820 mmMould height min.: 380 mmMould height max.: 825 mmPlaten size (h x v): 1200 X 1100 mmInjection unitScrew diameter: 60 mmInjection volume: 890 cm³Shot weight: 810 gInjection pressure: 2420 barMeasurements and weightDimensions: 8,2 X 2,2 X 2,4 mMachine weight: 22300 kgAdditional information & extrasCore pull: 4 pcsRobotProducer: Remak Year: 2008

Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live  ...

Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to  ...

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Screw diameter; 95 mm Injectable volume: 3360cm3 Injection pressure: 1895 bar Column width: 1000 x 900 mm Minimum mould thickness: 40 mm max: 950 mm Aperture stroke: 930 mm Cores: 4 Robot Interface: Yes Options: Retractable Column - Electric Dosing Motor 24 Zones Mold Heater Magnetic trays 8-point sequential injection Blow guns: 2 3-axis robot

Demag Ergotech System 80/420-430 Year of construction: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic Core Pull x 3 Control with hot runners Injection unit hardened - Bimetal Built-in printer It is possible to change the screw diameter Metrics: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes

Table height: 1000 mm Locking system: fully hydraulic Clamping force: 2500 kN Spray volume: 1500 cm³ Hydraulic oil: 40/46 cPcs. Compressed air: 6 bar Voltage: 400 V Weight: 6.35 t - Injects from below (type VU) - Ergonomic overall design - Generously dimensioned clamping unit - Fully hydraulic extensive automation possibilities of vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

Displacement: 1500 cm³ Clamping force: 2500 kN Injection pressure: 2000 bar Table height: 1,000 mm Locking system: fully hydraulic Voltage: 380 V Motor power: 26 kW Cooling water: 1 m³/h Weight: 5.5 t - Injects from above (type ZO) - Ergonomic overall design of the vertical machine - Generously dimensioned clamping unit - Extensive automation options for vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

warehouse no.: 503268 manufacturer: Dr. Boy type: Boy 35A controller: Procan year of construction: 2008 operation hours: 56508 clamping force: 350 kN distance between tie-bars h x v: 280 x 254 mm size of mould plates h x v: 425 x 400 mm min. mould height: 200 mm max. open daylight: 500 mm opening stroke: 300 mm screw diameter: 28 mm swept volume: 58.5 ccm injection pressure: 1577 bar equipment included: screen text german core pulling hydraulically 1x machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 measures of machine l x w x h: 2.39m x 0.88m x 1.918m total weight: 1600KG

Injection moulding machines Dr. Boy Boy 50A Warehouse No.: 503235 Manufacturer: Dr. Boy Type: Boy 50A Control: Procan Year of construction: 1999 Operating hours: 61000 h Technical data Close page Clamping force: 500 kN Holmass v: 335 mm Holmass h: 305 mm Plate size h: 500 mm Plate size v: 500 mm Installation height min.: 250 mm Plate height max.: 600 mm Opening distance: 350 mm Ejector stroke: 80 mm Ejector force: 18 kN Technical data spray side Screw diameter: 38 mm Displacement: 136 cc Spray pressure: 1345 bar Screw length: 15 l/d Screw stroke: 120 mm Screw speed: 315 min Screw torque: 400 N Plasticizing current: 18 g/s PS Number of heating zones: 5 Nozzle travel: 210 mm Dimensions & Weight Machine dimensions LxWxH: 3.41m x 1.1m x 2m Total weight: 2465KG Equipment German on-screen text Core pull hydraulic 1x Levelling elements

Injection moulding machines Dr. Boy Boy 50A Warehouse No.: 503155 Manufacturer: Dr. Boy Type: Boy 50A Control: Procan Year of construction: 2000 Operating hours: 69100 Technical data Close page Clamping force: 500 kN Holmass v: 360 mm Holmass h: 335 mm Plate size h: 530 mm Plate size v: 500 mm Installation height min.: 250 mm Plate height max.: 500 mm Opening distance: 350 mm Ejector stroke: 80 mm Ejector force: 42 kN Technical data spray side Screw diameter: 32 mm Displacement: 77 cc Spray pressure: 1030 bar Screw length: 16 l/d Screw stroke: 95 mm Screw speed: 250 min Screw torque: 240 N Number of heating zones: 5 Nozzle travel: 180 mm Dimensions & Weight Machine dimensions LxWxH: 3.41m x 1.1m x 2m Total weight: 2465KG Equipment German on-screen text Levelling elements

Injection moulding machines Dr. Boy Boy 50A Warehouse No.: 503234 Manufacturer: Dr. Boy Type: Boy 50A Control: Procan Year of construction: 1999 Operating hours: 69000 h Technical data Close page Clamping force: 500 kN Holmass v: 360 mm Holmass h: 305 mm Plate size h: 500 mm Plate size v: 500 mm Installation height min.: 250 mm Plate height max.: 500 mm Opening distance: 350 mm Ejector stroke: 80 mm Ejector force: 18 kN Technical data spray side Screw diameter: 32 mm Displacement: 77 cc Spray pressure: 1030 bar Screw length: 16 l/d Screw stroke: 95 mm Screw speed: 250 min Screw torque: 240 N Number of heating zones: 5 Nozzle travel: 180 mm Dimensions & Weight Machine dimensions LxWxH: 3.41m x 1.1m x 2m Total weight: 2465KG

Injection moulding machines Dr. Boy Boy 55 A Stock No.: 503233 Manufacturer: Dr. Boy Type: Boy 55 A Control: Procan Year of construction: 2003 Operating hours: 64000 h Technical data closing page Clamping force: 550 kN Holmass v: 360 mm Holmass h: 335 mm Panel size h: 530 mm Panel size v: 500 mm Installation height min.: 250 mm plate pitch max.: 500 mm Opening distance: 350 mm Ejector stroke: 80 mm Ejector force: 42 kN Technical data spray side Screw diameter: 32 mm Displacement: 76.5 cc Spray pressure: 1030 bar Screw length: 16 l/d Screw stroke: 95 mm Screw speed: 250 min Screw torque: 240 N Number of heating zones: 5 Nozzle travel: 180 mm Dimensions & Weight Machine dimensions LxWxH: 3.25m x 1.09m x 2.04m Total weight: 2250KG Equipment On-screen text german Core tension hydraulic 1x Levelling elements

warehouse no.: 503271 manufacturer: Dr. Boy type: Boy 55 A controller: Procan year of construction: 2003 clamping force: 550 kN distance between tie bars h:: 360 mm distance between tie bars v:: 335 mm size of mould plates h: 530 mm size of mould plates v: 500 mm min. mould height: 250 mm max. open daylight: 500 mm opening stroke: 350 mm screw diameter: 32 mm swept volume: 76.5 ccm injection pressure: 1030 bar measures of machine lxbxh: 3.25m x 1.09m x 2.04m total weight: 2250KG equipment included screen text german core pulling hydraulically 1x Anti vibration mounts

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

various control cards CC 90 for ENGEL injection moulding machines

Complete control CC 90 for ENGEL injection moulding machines

Manufacturer: ENGEL Type: CL1800/350 Year of construction: 2003 Clamping force: 350 tons Spar spacing: 735 x 735 mm Screw diameter: 60 mm Displacement: 763 cm³ Control: EC100 Equipment: -Robots, Manufacturer: ENGEL, ERC -2.0 core trains Available from December 2022

ENGEL DUO 3550H-500M / 800 WP ENGEL Viper Robot 40

Angel 2-K machine Angel Robot ERC

As of today, 92,434 operating hours, Screw diameter is 190 mm. Aggregate 45050. L/D 22 Barrier screw with mixed part. Dosing distance 900 mm displacement 25,520 sqcm. Shot weight approx. 18 kg. Length of the machine 17,418 mm Width of the machine 4,300 mm Height of the machine 3436 mm Weight of the machine 156 to. With oil pan Robot ERC 125/0-F, / Year of construction 2006 Lights Holab distance 2,000 x 1,600 mm (h / v) Clamping plates 2,900 x 2,500 mm (h / v) Max plate spacing 3,800 mm Min tool installation height 800 mm Max tool installation height 1,800 mm 32 heating zones Core pulls 2 pieces fixed side / 4 movable side Needle closure / cascade hydraulic 10 pieces Needle closure / cascade pneumatic 8 pieces

Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021

ENGEL DUO7050/500 (500 ton & 70mm screw)

ENGEL E-DUO 1340/700 (700 ton & 60mm screw) injection molding machine

ENGEL electric 180 ton ( 30mm screw)

ENGEL electric 180 ton (45mm screw) year `2014

Angel E-Max 200-50 (215) General information SKU: (215) Availability: In stock Year of construction: 2008 Brand: Angel Specifications Spray weight: 50 g Clamping force: 500 kN Stand: Used Screw diameter: 25 mm Injection pressure: 2400 bar Tie bar spacing: 320 x 370 mm Clamping plate size: 520 x 470 mm Tool installation height min.: 150 mm Control: LC 200 Language: English/ Swedish Power: 14 kW Hours: 37500 h Weight: 3400 kg Dimensions: 3.8 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Angel E-max 440-100 (216) General information Item number: (216 MB) Availability: In stock Year of construction: 2009 Brand: Angel Specifications Spray weight: 198 g Clamping force: 1,000 kN Stand: Used Screw diameter: 40 mm Spray pressure: 2000 bar Tie bar spacing: 410 x 460 mm Clamping plate size: 650 x 600 mm Tool installation height min.: 150 mm Control: LC 200 Language: English,Swedish Power: 18 kW Operating hours: 36000 h Weight: 4400 kg Dimensions: 4.7 x 1.3 m Funnel: No Euromap: Yes Air Valve: Yes

Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...

Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...

B&A REF: 8966 TON: 380 SHOT WEIGHT: 1190 SCREW DIAMETER: 70MM STROKE VOLUME: 1308CM3 INJECTION PRESSURE: 2400AR PLATEN SIZES: 1280 X 1280MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 750MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 700MM CONTROLS: CC 200 TOUCH AIR VALVES: 1 MOTOR: ELECTRIC HEATING CAPACITY: 44KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: ELECTRIC

warehouse no.: 503248 manufacturer: ENGEL type: e-motion 440-100 controller: CC200 year of construction: 2017 clamping force: 1000 kN size of mould plates h: 740 mm size of mould plates v: 700 mm min. mould height: 450 mm max. mould height: 720 mm max. open daylight: 1150 mm opening stroke: 430 mm screw diameter: 40 mm swept volume: 220 ccm injection pressure: 1930 bar measures of machine lxbxh: 5.3m x 1.6m x 2.2m total weight: 10000KG equipment included: screen text german Anti vibration mounts

Clamping force 150 ton