used Injection molding machines for sale

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

Battenfeld HM 45/60S with the Wittmann W702 sprue picker / machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 30 mm Injection weight: 31.1 g Spraying pressure: 1100 bar Dosing volume: 34.2 ccm Clamping unit : Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch Control Panel Additional equipment: Machine in very good technical condition Operating hours: approx. 39,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection It is possible to buy the machine with the Wittmann W702 sprue picker for additional payment Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x ...

Battenfeld HM 45/60S / Machine in very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 30 mm Injection weight: 20.8 g Spraying pressure: 1100 bar Dosing volume: 22.9 ccm Clamping unit: Clamping force: 45 t Tie bar spacing: 320x270 mm Size of clamping plates: 480x460 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 37,000 h Euromap Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating capacity: 3.3 kW Total power: 14.3 kW All offered machines are started by our service  ...

warehouse no.: 503402 manufacturer: BATTENFELD type: HM 8000-7700 controller: UNILOG B4 year of construction: 2003 operation hours: 50800 h clamping force: 8000 kN distance between tie-bars h x v: 1120 x 1020 mm size of mould plates h x v: 1620 x 1530 mm min. mould height: 725 mm max. mould height: 1175 mm max. open daylight: 2225 mm opening stroke: 1500 mm screw diameter: 90 mm swept volume: 3181 ccm injection pressure: 2420 bar equipment included: screen text german Bi-metallic barrel core pulling hydraulically 3x air valve 1x machine incl. Handling Anti vibration mounts interface EUROMAP 67 measures of machine l x w x h: 10.41m x 2.34m x 2.47m total weight: 56500KG

Battenfeld Plus 350/75 Year of construction: 1997 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Euromap 12 Robot Interface Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Battenfeld Plus 350/75 Year of construction: 1996 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Battenfeld Plus 350/75 Year of construction: 2007 Injection unit: Screw diameter: 25 mm Injection weight: 44.6 g Injection pressure: 1575 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B2 Additional equipment: Air valve x 1 Metrics: Weight: 1000 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Battenfeld TM 100/525 Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Metrics: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate ...

Inv. Num. : 6282 Type: TM 1300 RA2 Producer: Battenfeld Generated: 2001 Parameters: Clamping force: 130 t Injection weight: 6000 kg Equipment: Wittmann Robot System

Battenfeld TM 1600/750 Year of construction: 1999 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit : Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: It is possible to install Euromap interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 6000 kg Length/Width/Height: 5.05x1.51x2.09 m Drive: Pumps/motor: 22 kW Heating capacity: 13.8 kW Total power: 35.8 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Pric ...

Stock No.: 502923 Manufacturer: BATTENFELD Type: TM 2100-750+350V Control: UNILOG B4 Year of construction: 2003 Clamping force: 2100 kN Holm h x w: 570 x 570 mm Plate size h x w: 840 x 840 mm Min. installation height: 350 mm Max. installation height: 700 mm Plate spacing max.: 1230 mm Aperture travel: 530 mm Screw diameter: 45 mm Displacement: 358 ccm Spray pressure: 2116 bar Equipment 8x temperature control unit for hot runner On-screen text German CEE socket 16A Core pull hydraulic 1x Core hoist hydraulic 3x Air valve 1x Machine with water battery Machine without material hopper Spring-loaded valve gate nozzle Levelling elements EUROMAP 12 interface EUROMAP 13 interface Schuko socket 10A Two-Component Injection Molding Machine Machine dimensions LxWxH: 5.7m x 1.5m x 3.97m Total Weight: 13900KG

Stock No.: 503221 Manufacturer: BATTENFELD Type: TM 2700-3300 UNILOG B4 Year of construction: 2007 Clamping force: 2700 kN Holmass v x v: 630 x 630 mm Panel size h x v: 940 x 940 mm Installation height min.: 250 mm Installation height max.: 650 mm plate pitch max.: 1250 mm Opening distance: 600 mm Screw diameter: 75 mm Displacement: 1657 cc Spray pressure: 2087 bar Equipment: Screen text Dutch Core tension hydraulic 1x Air valve 1x Machine with water battery Machine without handling Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Machine dimensions LxWxH: 7.2m x 1.71m x 2.4m Total weight: 16000KG

Battenfeld TM 2700/1900 Year of construction: 2002 Injection unit: Screw diameter: 65 mm Spray weight: 981 g Spray pressure: 1777 bar Dosing volume: 1078 ccm Clamping unit : Clamping force: 270 t Tie bar spacing: 630x630 mm Size of clamping plates: 940x940 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Euromap Robot Interface Air valve x 2 Hydraulic core pull x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Central lubrication Automatic tool height adjustment Parallel Movements Metrics: Weight: 11800 kg Length/Width/Height: 7.08x1.70x2.20 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...

warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 UNILOG B6S year of construction: 2008 clamping force: 4000 kN distance between tie bars h x h: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm Iem7p9r min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar equipment included: Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface EUROMAP 67 Schuko-socket 16A measures of machine lxbxh: 7.2m x 1.75m x 2.42m total weight: 16400KG

Battenfeld TM 500/210 Year of construction: 2002 Injection unit: Screw diameter: 30 mm Spray weight: 96.5 g Injection pressure: 2042 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 490x490 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Central lubrication Proportional valve on the injection unit – precise injection Metrics: Weight: 2500 kg Length/Width/Height: 3.51x1.18x1.63 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...

Battenfeld HM 240 1330 2011 Battenfeld TM 400 2250 2009 We have 2 thermoset injection machine to sell. Battenfeld BCT 1800-1000 year 1994 (with Robot) Battenfeld BCT 1800-1000 year 1993 TM 27001900 BA 600200 CDC TM35001330 BA 1000 BKT THERMOSET INJECTON MACHINES Thermoset Inj. Machine- I Thermoset Inj. Machine- II With Battenfeld Robot BATTENFELD BCT 1800/100 BATTENFELD BCT 1800/100 Construction Year 1993 1994 Screw Diameter Ø60 mm Ø55 mm Clearance between tie bars 515 x 515mm 515 x 515mm Day light 1.000mm 1.000mm Working Hours 81814 h 57929 h Also: Name Battenfeld Battenfeld Type of machine HM-E 240/ 1330 INSIDER TM-E 400/2250 Control system Unilog B6E Unilo ...

Screw diameter: 60 mm Injectable volume: Injection Pressure: Passage between columns: 735 x 735 Mould thickness: min: 330mm- max: 680 Opening stroke: 660 mm Number Of Cores :2 Robot interface: E67

ALREADY SOLD MORE MACHINES COMING SOON BMB High Tonnage Injection Molding Machine 1000 Tons Model KW 1000 / 7500 Year of Manufacture 2000 Voltage 400 Frequency 50hz Availability, ready to load See pictures please

Year of construction: 2013 Screw diameter: 60 mm Spec. Spray pressure: 1610 bar Injection volume: 848 cc Injection weight in hp: 800 g Clamping unit: Clamping force: 260 t Size of the clamping plates: 835 x 835 mm Lights tie bar distance: 575 x 575 mm Installation height: 195 mm Opening distance: 405 mm plate spacing: 600 mm Ejector travel: 180 mm Hydr. Drive power: 21 kW Cylinder heating capacity: 16.2 kW General information: Delivery time: Short term Dimensions(m) LxWxH: 6.3 x 1.8 x 2.0 m Weight: 8500 kg

B&A REF: 9008 TON: 800 SHOT WEIGHT: 3687G SCREW DIAMETER: 100MM STROKE VOLUME: 3927CM3 INJECTION PRESSURE: 1470BAR PLATEN SIZES: 1470 X 1470MM DBTB: 1010 X 1010MM MIN MOULD HEIGHT: 380MM MAX MOULD HEIGHT: 975MM MOULD OPENING STROKE: 1025MM MAX DAYLIGHT: 2000MM EJECTOR STROKE: 300MM CONTROLS: KEBA AIR VALVES: 2 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

Awaiting refurbishment at our works in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12882 Manufacturer: BOY Model: 12A Datasheet (PDF): View Here Viewing: Not yet refurbished Condit ...

We have in our workshop and awaiting refurbishment this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12646 Manufacturer: ...

Boy 22M / Machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 28 mm Spray weight: 47 g Spray pressure: 1069 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 22 t Tie bar spacing: 254 mm Size of clamping plates: 220x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan MD - Touchscreen Additional equipment: Machine in very good technical condition Air valve x 1 Injection unit hardened - Bimetal Operating hours: 34,000 in automatic mode Metrics: Weight: 820 kg Length/Width/Height: 2.28x0.81x1.62 m Drive: Pumps/motor: 5.5 kW Heating capacity: 5.8 kW Total power: 11.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our comp ...

Now fully refurbished by the team at STV Machinery is this BOY 22M VH injection moulding machine. This machine was manufactured in 2002 with very low 12,187 run hours. It is fitted with a 24mm screw. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding Latest Refurb ID: 12066 Manufacturer: BOY Model: 22MVH Datasheet (PDF): View Here Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 22 Screw Diameter (mm): 24 Max Shot Weight (PS)  ...

Now fully refurbished is this four tie-bar BOY 30 tonne clamp machine with Dipronic controller . The Dipronic controller fitted to this machine and other ‘D’ series has stood the test of time and is now even demanding a premium. The controller and setup of the machine is straightforward, easy to problem solve and great for learning. Without expensive computer controlled systems, the cost of any repairs are often very low and easily carried out. The machine offers excellent platen dimensions and tie-bar clearance for the footprint, these machines are some of the most popular in the market for their niche. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. M ...

Awaiting refurbishment at our works in Wellingborough is this BOY 30M machine with Procan controller. These 30 tonne clamp machines from BOY are some of the smallest (footprint wise) available on the market. The 30M’s are a rarer variant of the market leading BOY 22. The key difference, aside from the uprated clamp force, is that the 30M’s have larger platens and a four tiebar design, allowing for greater versatility. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get ...

Boy 35A VV Year of construction: 2005 Injection unit: Screw diameter: 28 mm Spray weight: 55.8 g Spray pressure: 1577 bar Dosing volume: 58.5 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 280x254 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan CT - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Metrics: Weight: 1350 kg Length/Width/Height: 2.06x0.95x2.74 m Drive: Pumps/motor: 7.5 kW Heating capacity: 5.8 kW Total power: 13.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

BOY 35ton Injection Moulding machine Model 35E Horizontal 415V, 50Hz Year 2012

Manufacturer: Boy Type: 55 AVV Year of construction: 2012 Control: Procan ALPHA Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Stroke volume: 96.5 ccm / 92.3 gram HP Injection pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Type: 55 M Built: 2003 Control: Procan MD Closing type: Hydraulic Technical data Closing force: 550 kN Tie bar distance H x V: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance max.: 400 mm Plate spacing max.: 650 mm Screw diameter: 28 mm Lifting volume / spray weight (PS): 73.9 cc / 67 gram hp Spray pressure: 2778 bar General data Engine: 11 kW Heating: 9.6 kW Operating hours: on request Dimensions L x W x H: 3.3 m 1.8 m x 1.3 m Weight: 2430 kg Accessories Screen text: German Manual: Yes Additional equipment: Core train: x2 Robot interface

Manufacturer: Boy Type: 55 MVV Year of construction: 2008 Control: Procan MD Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Displacement: 96.5 cc Spray weight PS: 92.3 gram HP Spray pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of construction: 2016 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

Boy 90 M Year of construction: 2004 Injection unit: Screw diameter: 42 mm Spray weight: 193 g Injection pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tie bar spacing: 430x360 mm Size of clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Boy 90A (No. 101) Built: 2006 TECHNICAL DATA Screw diameter [mm]: 42 Spray weight [g]: 193 Spray pressure [bar]: 1724 Closing force [kN]: 900 Tie bar distance [mm]: 430x360 Clamping plate size [mm]: 635 x 610 Tool installation height min. [mm]: 250 Control Control: Procan CT Monitor: Yes Control cabinet: Yes Other Power [kW]: 26.3 Engine hours [h]: 16969 Dimensions [m]: 4.9 x 1.2 x 2.1 Bjqmbwo2fl Weight [kg]: 3100

BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No

Awaiting refurbishment by our team at STV Machinery in Wellingborough, Northamptonshire is this 2002, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller and 36mm plasticising unit. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free ...

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fau ...

This injection molding machine from Dr. Boy is in good condition. The machine is from 2022 and has few working hours. – Brand: Dr. Boy – Model: XS – Year of construction: 2022 – Screw diameter: 18 mm – Shot volume: 15.3 cm³ – Closing force: 10 T – Working hours: < 25

Angebot / Offer: CMEC-HY Cap 48 Year: 2009 MOULD Cavities: 32x Closure Type: PCO 1810 standard Closure Weight: 2.5 gr Cycle time: 6 sec Hourly output: 19200 pcs Control: Siemens S7 Hours: 3200 hrs Dimensions: (LxWxH) 7.30 m x 2.40 m x 2.60 m

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of construction: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touchscreen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air Valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor, which is controlled by an inverter – very precise Automatic part feeding with quality control system Machine workstation protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

warehouse no.: 503071 manufacturer: DEMAG type: Concept 350-710-1450 controller: NC4 year of construction: 2003 operation hours: 62370 h clamping force: 3500 kN distance between tie-bars h x v: 710 x 630 mm size of mould plates h x v: 1040 x 950 mm min. mould height: 330 mm max. mould height: 830 mm max. open daylight: 1385 mm opening stroke: 675 mm screw diameter: 60 mm swept volume: 763 ccm injection pressure: 1905 bar equipment included: 16x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x air valve moveable WAP machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 63 Schuko-socket 10A measures of machine l x w x h: 6.5m x 2m x 2.3m total weight: 15300KG

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Air valve / air valve: x 1

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1